Last Updated: August 4, 2026
This page contains the complete package for your Tecno Spark Go KC1: the stock ROM, necessary drivers, and a clear path to fix common software glitches.
Device: Tecno Spark Go KC1 | Chipset: MediaTek MT6761 Helio A22 | Flash Tool: SP Flash Tool
Android: Android 9.0 (Pie), HIOS 5.0 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Spark Go KC1 (MediaTek MT6761 Helio A22)
Flash Tool: SP Flash Tool
Latest Build: V520
Firmware Files: 8 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Spark Go KC1 Firmware (Flash File) Drivers, Tools & Guide
I have been working on phones for years, and the Tecno Spark Go KC1 is a frequent visitor in my repair queue. It typically arrives with FRP locks, bootloop issues, or stuck on the Tecno logo. This guide puts everything you need in one spot: the firmware, the tools, and the exact process I use myself.
One tip I always share before starting: extract the firmware to a simple folder path, such as C:FirmwareKC1. SP Flash Tool can sometimes struggle to locate the scatter file if the folder name contains spaces or special characters. It is a small detail, but it saves a frustrating few minutes of wondering why the tool will not load the file.
The Tecno Spark Go KC1 was originally released in 2019, which means USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play. The Tecno Spark Go KC1 runs on a MediaTek MT6761 Helio A22 chipset, which means you will use SP Flash Tool and VCOM/MTK drivers for flashing. These are included in the prerequisites below. This page lists 8 firmware builds for the Tecno Spark Go KC1, covering multiple Android versions and security patch levels. If one build does not work, try a different version.
We verified firmware file integrity across 2 independent sources to confirm these are authentic, unmodified stock ROMs. The Tecno Spark Go KC1 was released in 2019. This page is maintained with the latest available firmware builds as they become available.
Your Tecno Spark Go KC1 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
Once you flash, the device goes back to factory condition. Everything stored on the phone, photos, messages, apps, will be gone. This clean state is what allows the flash to fix stuck logos, FRP locks, software corruption, and performance issues.
Tecno Spark Go KC1 FRP Bypass
The fastest way to bypass FRP on Tecno Spark Go KC1 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Hard Reset Tecno Spark Go KC1
To factory reset Tecno Spark Go KC1 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Tecno Spark Go KC1 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
Verify Your Tecno Spark Go KC1 Model Before Downloading
The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Verify Your Exact Model: In Settings, look for the model code “KC1”. Some Tecno phones share the same marketing name but have different internal hardware.
- Confirm the Processor: This build targets the MediaTek MT6761 Helio A22 chipset. You can check your chipset via recovery mode or a hardware info app.
- Review the Version Number: The firmware version in the download table should be close to or newer than what your device is currently running.
- Use Recovery Mode as a Safety Check: Before flashing, boot into recovery to see the current build number and chipset printed on screen. This is the most trustworthy check.
- Verify the Region: Some firmware builds are region-specific. Confirm the download matches your device region or is listed as global.
Why Do We Need Tecno Spark Go KC1 Firmware?
The Tecno Spark Go KC1 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Update to the latest Android version supported by your phone.
- Repair a phone that shuts down randomly or restarts in a loop.
- Restore system apps that were accidentally removed or corrupted.
- Fix startup loops, lagging, and freezing on your device.
- Unlock your device if it has been locked or disabled.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Tecno Spark Go KC1
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Spark Go KC1 |
| Firmware Version | V165, V520, V226, V264 |
| File Size | 1.4 GB to 1.67 GB |
| Android Version | Android 9.0 (Pie), HIOS 5.0 |
| Platform | MediaTek MT6761 Helio A22 |
| Release Date | Released 2019, August |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V520, download this one. It is the latest Tecno Spark Go KC1 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V264, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V520 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V520 failed with a flash error | Try V264 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V520, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Spark Go KC1 Firmware
Download the official stock firmware for your Tecno Spark Go KC1 below. The latest available version is V520. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Spark_Go_KC1_MT6761_V165_190731.zip Size: 1.62 GB | Download Link | Download Link2 |
| File Name: KC1-H6114AL-P-210513V520.zip Size: 1.67 GB | Download Link | Download Link2 |
| File Name: Tecno Spark GO (KC1-H6114A-P-191010V226).7z Size: 1.4 GB | Download Link | Download Link2 |
| File Name: KC1-H6114A-P-191119V264.zip Size: 1.66 GB | Download Link | Download Link2 |
| File Name: KC1-H6114A-P-191010V226.zip Size: 1.65 GB | Download Link | Download Link2 |
| File Name: KC1-H6114A-P-190731V165.zip Size: 1.64 GB | Download Link | Download Link2 |
| File Name: Tecno Spark GO (KC1-H6114A-P-191010V226).7z Size: 1.4 GB | Download Link | Download Link2 |
| File Name: Tecno Spark Go KC1 (KC1-H6114A-P-190731V165).7z Size: 1.4 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Spark Go KC1 (KC1) should not be confused with other Spark Go variants that may have different chipsets or regional firmware. Even devices in the same Spark Go line can use completely different processors. Always verify your exact model code “KC1” in Settings > About Phone before downloading any firmware from this page.
- Go to Settings and verify your model is exactly KC1. Phones with similar names can have completely different hardware.
- The chipset in your device should be MediaTek MT6761 Helio A22. If it is different, this firmware will not work.
- Always download directly from the table on this page to ensure you have the correct build.
- Check the file size after downloading, a mismatch with the listed size means a partial or corrupt download.
Before You Start: Tecno Spark Go KC1 Requirements
Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Spark Go KC1 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Flashing Tecno Spark Go KC1 Firmware With SP Flash Tool
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Hit the “Download” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
Troubleshooting Tecno Spark Go KC1 Flash Errors
- Tecno Spark Go KC1 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the KC1, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
After Flashing: What Happens Next on Tecno Spark Go KC1
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
Missing IMEI or Corrupt Baseband on Tecno Spark Go KC1 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Tecno Spark Go KC1 Firmware FAQ
Q1: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q2: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q3: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q4: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q5: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q6: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.
Q7: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
Q8: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
People Also Ask About Tecno Spark Go KC1
What is the latest firmware version for Tecno Spark Go KC1?
The latest available Tecno Spark Go KC1 firmware on this page is version V520. This page has 8 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Tecno Spark Go KC1 erase my data?
Yes. Flashing stock firmware on the Tecno Spark Go KC1 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Can flashing firmware fix a bricked Tecno Spark Go KC1?
Yes. If your Tecno Spark Go KC1 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
What chipset does the Tecno Spark Go KC1 use?
The Tecno Spark Go KC1 uses the MediaTek MT6761 Helio A22 chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
Final Thoughts
You now have everything needed to flash your Tecno Spark Go KC1 back to stock using SP Flash Tool. The process is straightforward as long as you follow the steps in order and do not skip the driver installation.
Got stuck somewhere? Drop a comment with the error message and the step number. I check comments regularly and will point you in the right direction.
If this worked for you, share the page so others with the same device can find it too.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
