Last Updated: July 6, 2026
This guide provides the official Tecno Camon iACE2 KB2 firmware, drivers, and steps to fix common issues. Download the stock ROM, grab the tools, and follow the process to restore your device.
Device: Tecno Camon iACE2 KB2 | Chipset: MediaTek MT6761 Helio A22 | Flash Tool: SP Flash Tool
Android: Android 8.1 (Oreo), HIOS 4.1 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Camon iACE2 KB2 (MediaTek MT6761 Helio A22)
Flash Tool: SP Flash Tool
Latest Build: V118
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Camon iACE2 KB2 Firmware (Flash File) Drivers, Tools & Guide
The Tecno Camon iACE2 KB2 frequently appears in the repair queue with FRP locks, bootloops, or boot-up issues. This guide gathers the required files and instructions to address these problems. I have put everything you need in one place: the firmware, the tools, and the exact process I use myself.
One thing I always recommend before you start: extract the firmware to a simple folder path, something like C:FirmwareKB2. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. It is a small thing, but it saves a frustrating few minutes of wondering why the tool is not loading the file.
Only one firmware build is currently available for the Tecno Camon iACE2 KB2. This is the stock ROM you should use for recovery, unbricking, or FRP bypass. The Tecno Camon iACE2 KB2 was originally released in 2019, which means USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play. The stock firmware ships with Android 8.1 (Oreo), HIOS 4.1, which determines the default apps, security features, and interface you will see after flashing.
This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page. As a Transsion Holdings brand, Tecno devices share similar chipset architectures and flashing procedures across the Camon iACE2 lineup.
Your Tecno Camon iACE2 KB2 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
Keep in mind that flashing stock firmware erases all data, which is intentional, as it resolves software issues including FRP lock, app problems, slow performance, forgotten pattern locks, a dead or logo-stuck device, Wi-Fi and Bluetooth issues, battery drain, and soft brick situations.
Factory Reset Tecno Camon iACE2 KB2 Without a PC
To factory reset Tecno Camon iACE2 KB2 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Tecno Camon iACE2 KB2 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
Remove FRP Lock on Tecno Camon iACE2 KB2
The fastest way to bypass FRP on Tecno Camon iACE2 KB2 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Why Flash Stock ROM on Tecno Camon iACE2 KB2?
The Tecno Camon iACE2 KB2 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Recover your device when it only boots into recovery mode.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Unlock your device if it has been locked or disabled.
- Restore the original Tecno stock ROM to keep your warranty valid.
- Repair a phone that shuts down randomly or restarts in a loop.
- Remove persistent malware or adware that survives a factory reset.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Tecno Camon iACE2 KB2 Firmware Compatibility Check
The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Open About Phone: Your device model must read “KB2” exactly. Even small differences in the code can mean a completely different chipset and partition layout.
- Verify the Chipset Type: This firmware targets MediaTek MT6761 Helio A22 specifically. Flashing it on a different chipset will fail or could brick the device.
- Check Your Current Firmware Version: Compare your build number with the versions listed in the download section to decide which file to use.
- Use Recovery Mode: If you cannot access Settings (phone is stuck or locked), boot into recovery mode to read the build and chipset details from the screen.
- Regional Compatibility: Some Tecno firmware packages target specific regions. Confirm the download matches your device origin.
Firmware Details for Tecno Camon iACE2 KB2
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Camon iACE2 KB2 |
| Firmware Version | V118 |
| File Size | 1.2 GB |
| Android Version | Android 8.1 (Oreo), HIOS 4.1 |
| Platform | MediaTek MT6761 Helio A22 |
| Release Date | Released 2019, February |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V118, download this one. It is the latest Tecno Camon iACE2 KB2 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V118 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V118 failed with a flash error | Try the next older version instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V118, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Camon iACE2 KB2 Firmware
Download the official stock firmware for your Tecno Camon iACE2 KB2 below. The latest available version is V118. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno Camon iAce 2 KB2 (KB2-H613DJ-O-190216V118).7z Size: 1.2 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Camon iACE2 KB2 (KB2) should not be confused with other Camon iACE2 variants that may have different chipsets or regional firmware. Even devices in the same Camon iACE2 line can use completely different processors. Always verify your exact model code “KB2” in Settings > About Phone before downloading any firmware from this page.
- Your model number is a variant of KB2 with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from MediaTek MT6761 Helio A22. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Tecno Camon iACE2 KB2 Firmware
Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Camon iACE2 KB2 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Flashing Tecno Camon iACE2 KB2 Firmware With SP Flash Tool
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Hit the “Download” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
What Is Normal After a Tecno Camon iACE2 KB2 Flash?
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
- Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
Common Issues When Flashing Tecno Camon iACE2 KB2
- Tecno Camon iACE2 KB2 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the KB2, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
Missing IMEI or Corrupt Baseband on Tecno Camon iACE2 KB2 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Questions About Tecno Camon iACE2 KB2 Firmware
Q1: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 8.1 (Oreo), HIOS 4.1 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q2: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q3: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Camon iACE2 KB2 running on the MediaTek MT6761 Helio A22 chipset. Even variants of the Camon iACE2 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q4: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.
Q5: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q6: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q7: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q8: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
People Also Ask About Tecno Camon iACE2 KB2
What chipset does the Tecno Camon iACE2 KB2 use?
The Tecno Camon iACE2 KB2 uses the MediaTek MT6761 Helio A22 chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
Can flashing firmware fix a bricked Tecno Camon iACE2 KB2?
Yes. If your Tecno Camon iACE2 KB2 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
How do I check my Tecno Camon iACE2 KB2 model number before flashing?
Go to Settings > About Phone on your Tecno Camon iACE2 KB2 and look for the model number “KB2”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
What is the latest firmware version for Tecno Camon iACE2 KB2?
The latest available Tecno Camon iACE2 KB2 firmware on this page is version V118. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
Conclusion
You have just completed a clean firmware flash on your Tecno Camon iACE2 KB2. The device should now be back at the setup wizard on a fresh V118 build.
Questions, errors, or something not covered here? The comments section is open. Tell me exactly what happened and I will walk you through the fix.
If you found this useful, a quick share goes a long way, someone else with the same device is probably searching for this right now.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
