Tecno Spark Pro K8 Firmware

Last Updated: August 8, 2026

You can restore your Tecno Spark Pro K8 to working condition by flashing the official stock ROM, installing the correct drivers, and following the steps outlined below. ⚡ At a Glance Device: Tecno Spark Pro K8  |  Chipset: MediaTek MT6737V  |  Flash Tool: SP Flash Tool Android: Android 7.0 (HiOS 2.0)  |  File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) ⚠ Warning: Flashing erases all data. Back up first. Quick Summary Device: Tecno Spark Pro K8 (MediaTek MT6737V) Flash Tool: SP Flash Tool Latest Build: V108 Firmware Files: 2 available What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers Time Required: 10-20 m

---

Tecno Spark Pro K8 Firmware (Flash File) Drivers, Tools & Guide

Tecno Spark Pro K8 phones come into my workshop often. They usually arrive with FRP locks, bootloop issues, or they get stuck on the Tecno logo. This guide covers all of those problems. I have put everything you need in one place: the firmware, the tools, and the exact process I use myself.

A helpful tip before you start is to extract the firmware to a simple folder path, such as C:FirmwareK8. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. It is a small thing, but it saves a frustrating few minutes of wondering why the tool is not loading the file.

This page offers two different firmware files for the Tecno Spark Pro K8. Pick the one that matches your current Android version for the smoothest flash. The stock firmware ships with Android 7.0 Nougat (HiOS 2.0), which determines the default apps, security features, and interface you will see after flashing. The Tecno Spark Pro K8 was originally released in 2017, which means USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play.

The files on this page are verified and checked for integrity before being listed. As a Transsion Holdings brand, Tecno devices share similar chipset architectures and flashing procedures across the Spark Pro lineup.

Your Tecno Spark Pro K8 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.

It is important to understand that flashing overwrites the entire software partition. Your data, apps, and accounts will all be removed. This full wipe is how the flash resolves deep software issues, anything from FRP locks and boot failures to Wi-Fi problems and app crashes.

---

Reset Tecno Spark Pro K8 From Recovery Mode

You can factory reset Tecno Spark Pro K8 from recovery mode without a computer. Power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores Tecno Spark Pro K8 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.

---

Tecno Spark Pro K8 FRP Bypass

Using a free Android apps launcher is the fastest way to bypass FRP on Tecno Spark Pro K8. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.

---

What Tecno Spark Pro K8 Firmware Fixes

The Tecno Spark Pro K8 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:

• Resolve touchscreen responsiveness issues caused by a corrupted system build.
• Resolve OTA update failures and battery drain issues.
• Repair a phone that shuts down randomly or restarts in a loop.
• Unlock your device if it has been locked or disabled.
• Remove persistent malware or adware that survives a factory reset.
• Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
• Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.

Learn more about stock ROMs and why flashing works.

---

Tecno Spark Pro K8 Firmware Compatibility Check

Flashing the wrong firmware is the most common error I see. Before downloading anything, verify your exact device identity:

1. Identify Your Device Model: Go to About Phone and confirm your model is Tecno Spark Pro K8. Check the full model string, not just the name.
2. Verify the Build Number: Look for the identifier “K8” in your device build details.
3. Confirm the Chipset: According to Tecno specifications, the Spark Pro K8 runs on MediaTek MT6737V.
4. Match the Firmware Version: Check the version and regional details against what is listed in the download table above.
5. Verify in Recovery Mode: If you are not sure about the chipset or build number, boot into recovery mode, it displays this information clearly and is the most reliable way to confirm before you flash.

---

Firmware Details for Tecno Spark Pro K8

Here is a quick overview of the official firmware specifications:

Firmware Information	Details
Device Model	Tecno Spark Pro K8
Firmware Version	V108
File Size	1.31 GB to 1.38 GB
Android Version	Android 7.0 Nougat (HiOS 2.0)
Platform	MediaTek MT6737V
Release Date	Released 2017, November
Region	Global, Africa and Asia
File Type	ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)

---

Which Firmware Version Should I Download?

This is the most frequent question I receive, so I created a simple guide. Find your situation in the table and go straight to the right file:

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	V108, download this one. It is the latest Tecno Spark Pro K8 firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Phone slow after a recent OTA update	Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better.
IMEI missing after a previous flash	Re-flash V108 first, then follow the IMEI repair guide. Do not skip the reflash.
V108 failed with a flash error	Try the next older version instead and double-check your scatter file selection before assuming the firmware is the problem.
Restoring to factory / warranty repair	V108, clean state, fresh start.

My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.

---

Download Tecno Spark Pro K8 Firmware

You can download the official stock firmware for your Tecno Spark Pro K8 below. The latest available version is V108. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: Tecno_Spark_Pro_K8_MT6735M_12292017_7.0.zip Size: 1.31 GB	Download Link	Download Link2

File Name: Tecno_Spark_Pro_K8_MT6737M_V108_180205.zip Size: 1.38 GB

Download Link

Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Tecno Spark Pro K8 (K8) should not be confused with other Spark Pro variants that may have different chipsets or regional firmware. Even devices in the same Spark Pro line can use completely different processors. Always verify your exact model code “K8” in Settings > About Phone before downloading any firmware from this page.

---

Tecno Spark Pro K8 Flash Setup Checklist

Skipping these steps is a common cause of failed flashes. The VCOM driver installation is essential for the Tecno Spark Pro K8 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.

1. Save Your IMEI Numbers: Type *#06# in the phone dialer and note down both numbers. These are your device identifiers for the cellular network. If flashing wipes them, you will need the originals to write them back.
2. Disconnect Google Accounts: Before you start anything, remove all Google accounts from the phone. Settings then Accounts then tap each Google account and remove it. This avoids the FRP verification screen that appears after flashing if accounts were still linked.
3. Create a Backup: Copy your data to your computer or an SD card. Flashing replaces the entire software on the phone, which means all personal data, apps, and settings will be permanently deleted.
4. Charge First: Get the battery above 50% before starting. The flashing process takes a few minutes and the first boot takes several more. A power failure during either stage can leave the device in a state that requires more advanced recovery.
5. Prepare Your PC Connection: You need a Windows computer and a USB cable that supports data transfer. Test the cable first by connecting the phone normally, if it shows up in File Explorer, the cable is good.
6. Install the Right Drivers:
   • VCOM Drivers
   • Tecno USB Drivers

---

Step-by-Step: Flash Tecno Spark Pro K8 Stock ROM

We will use SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.

1. Get the Firmware Ready:
   • Download the firmware file from the download section above.
   • Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like C:firmware.
2. Verify Your Drivers:
   • Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
3. Load the Firmware File:
   • Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
4. Connect Your Device:
   • Power off your phone completely, not sleep mode, fully off.
   • Connect to your PC via USB cable. The flash tool will detect it automatically.
5. Start Flashing:
   • Hit the “Download” button in the flash tool to start the process.
   • Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
6. Wait and Reboot:
   • When the flash completes, unplug the USB cable from your phone.
   • Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.

---

Normal Behavior After Installing Tecno Spark Pro K8 Firmware

Here is what is completely normal after a successful flash:

• How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
• Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
• Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
• Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
• Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
• All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
• Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.

---

Troubleshooting Tecno Spark Pro K8 Flash Errors

1. Tecno Spark Pro K8 Not Recognized by SP Flash Tool:
   • In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the K8, restart your PC, and try again before changing anything else.
   • If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
   • Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
2. Boot Loop After Flashing:
   • Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
3. Wrong Scatter File / Firmware Mismatch:
   • If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
4. “Download DA FAIL” Error:
   • This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
5. Error 8038 (BROM Error):
   • The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
6. Auth File / Secure Boot Error in Newer SP Flash Tool:
   • Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.

---

Missing IMEI or Corrupt Baseband on Tecno Spark Pro K8 After Flashing?

A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:

1. Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
2. Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
3. Run the repair:
   • Connect your device to the computer.
   • Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
   • Click “Start” and let it complete without interrupting the connection.
4. Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.

Video Guide: How to repair IMEI

Credits: https://www.youtube.com/@mhgsmclinic

---

Questions About Tecno Spark Pro K8 Firmware

Q1: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.

Q2: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.

Q3: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.

Q4: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.

Q5: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.

Q6: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.

Q7: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.

Q8: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.

People Also Ask About Tecno Spark Pro K8

Will flashing firmware on Tecno Spark Pro K8 erase my data?
Yes. Flashing stock firmware on the Tecno Spark Pro K8 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.

How do I check my Tecno Spark Pro K8 model number before flashing?
Go to Settings > About Phone on your Tecno Spark Pro K8 and look for the model number “K8”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

What chipset does the Tecno Spark Pro K8 use?
The Tecno Spark Pro K8 uses the MediaTek MT6737V chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.

What is the latest firmware version for Tecno Spark Pro K8?
The latest available Tecno Spark Pro K8 firmware on this page is version V108. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.

---

Tecno Spark Pro K8 Firmware, Final Notes

That is everything you need to safely flash the official Tecno Spark Pro K8 firmware (V108) using SP Flash Tool and get your device working again. If you followed each step, your phone should now be running on a clean build.

If something did not go as expected, a specific error, a step that is not working for your setup, leave a comment below with as much detail as you can: the exact error message, which step you are on, and what you have already tried. I read every comment and will help you work through it.

If this guide helped you, consider sharing it, it is the best way to help someone else who is dealing with the same problem.

Browse all Tecno firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.