Last Updated: June 22, 2026
This page contains the official stock ROM and necessary tools to fix your Tecno Pop 2 Plus BA2. Download the firmware, grab the tools, and follow the guide. Troubleshooting and IMEI repair are covered too.
Device: Tecno Pop 2 Plus BA2 | Chipset: MediaTek MT6580P Quad-core 1.3 GHz Cortex-A7 | Flash Tool: SP Flash Tool
Android: Android 8.1 Oreo (Go edition) | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Pop 2 Plus BA2 (MediaTek MT6580P Quad-core 1.3 GHz Cortex-A7)
Flash Tool: SP Flash Tool
Latest Build: V553
Firmware Files: 5 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Pop 2 Plus BA2 Firmware (Flash File) Drivers, Tools & Guide
I see Tecno Pop 2 Plus BA2 devices frequently in my repair work. They usually arrive with bootloops, FRP locks, or a stuck logo. This guide consolidates the firmware, tools, and process into one location.
I suggest extracting the file to a standard folder like C:FirmwareBA2. SP Flash Tool struggles with paths containing spaces or special characters. This simple step prevents many loading errors.
The Tecno Pop 2 Plus BA2 runs on a MediaTek MT6580P Quad-core 1.3 GHz Cortex-A7 chipset, which means you will use SP Flash Tool and VCOM/MTK drivers for flashing. The stock firmware ships with Android 8.1 Oreo (Go edition), which determines the default apps, security features, and interface you will see after flashing. This page lists 5 firmware builds for the device, covering multiple Android versions and security patch levels. If one build does not work, try a different version.
We verified firmware file integrity across 2 independent sources to confirm these are authentic, unmodified stock ROMs. Tecno devices often share similar architectures, so the flashing process remains consistent across the Pop 2 Plus line.
Your Tecno Pop 2 Plus BA2 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
Be aware that flashing stock firmware erases all data, which is intentional, as it resolves software issues including FRP lock, app problems, slow performance, forgotten pattern locks, a dead or logo-stuck device, Wi-Fi and Bluetooth issues, battery drain, and soft brick situations.
Tecno Pop 2 Plus BA2 Hard Reset Guide
Perform a factory reset on the Tecno Pop 2 Plus BA2 without a computer by powering it off completely. Hold Volume Up and Power together until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A factory reset wipes all data and restores the device to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
Tecno Pop 2 Plus BA2 Google Account Bypass After Reset
The fastest way to bypass FRP on the Tecno Pop 2 Plus BA2 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Why Flash Stock ROM on Tecno Pop 2 Plus BA2?
The Tecno Pop 2 Plus BA2 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Fix startup loops, lagging, and freezing on your device.
- Repair a phone that shuts down randomly or restarts in a loop.
- Unlock your device if it has been locked or disabled.
- Recover your device when it only boots into recovery mode.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Read more about stock ROMs and why flashing works.
Tecno Pop 2 Plus BA2 Firmware Compatibility Check
Flashing the wrong firmware is a common error. Verify your device identity before downloading anything:
- Check About Phone: Open Settings and find your exact model number. It should read “BA2”, not a similar name, the exact code.
- Match the Chipset: This firmware is built for MediaTek MT6580P Quad-core 1.3 GHz Cortex-A7. If your device has a different processor, it will not flash correctly.
- Look at the Build Number: The build string in your current software should reference the Pop 2 Plus line. Cross-check it with the firmware table below.
- Check Recovery Mode: Power off, hold Volume Up + Power until recovery appears. The screen displays your chipset and current build, use this to confirm.
- Compare File Details: Make sure the version listed in the download table matches what you expect for your device and region.
Firmware Details for Tecno Pop 2 Plus BA2
Review the official specifications below:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Pop 2 Plus BA2 |
| Firmware Version | V321, V553 |
| File Size | 0.18 MB to 963.69 MB |
| Android Version | Android 8.1 Oreo (Go edition) |
| Platform | MediaTek MT6580P Quad-core 1.3 GHz Cortex-A7 |
| Release Date | Released 2019, May |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
Users often ask which version to choose. Check the table below to match your situation with the correct firmware:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V553, download this one. It is the latest Tecno Pop 2 Plus BA2 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V321, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V553 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V553 failed with a flash error | Try V321 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V553, clean state, fresh start. |
For MediaTek devices, try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Pop 2 Plus BA2 Firmware
Download the official stock firmware for your Tecno Pop 2 Plus BA2 below. The latest available version is V553. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_BA2_MT6580_V321_190929.zip Size: 948.21 MB | Download Link | Download Link2 |
| File Name: Tecno_BA2_DA By.zip Size: 182.85 KB | Download Link | Download Link2 |
| File Name: TECNO-POP-2-PLUS-BA2-H8027ABC-OGo-210527V553.zip Size: 963.69 MB | Download Link | Download Link2 |
| File Name: BA2-H8027ABC-OGo-190929V321.zip Size: 959.46 MB | Download Link | Download Link2 |
| File Name: Tecno POP 2 Plus (BA2-H8027ABC-OGo-190929V321).7z Size: 798.5 MB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Pop 2 Plus BA2 (BA2) should not be confused with other Pop 2 Plus variants that may have different chipsets or regional firmware. Even devices in the same Pop 2 Plus line can use completely different processors. Always verify your exact model code “BA2” in Settings > About Phone before downloading any firmware from this page.
- Go to Settings and verify your model is exactly BA2. Phones with similar names can have completely different hardware.
- The chipset in your device should be MediaTek MT6580P Quad-core 1.3 GHz Cortex-A7. If it is different, this firmware will not work.
- Always download directly from the table on this page to ensure you have the correct build.
- Check the file size after downloading, a mismatch with the listed size means a partial or corrupt download.
Tecno Pop 2 Plus BA2 Flash Setup Checklist
Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Pop 2 Plus BA2 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Save Your IMEI Numbers: Type *#06# in the phone dialer and note down both numbers. These are your device identifiers for the cellular network. If flashing wipes them, you will need the originals to write them back.
- Disconnect Google Accounts: Before you start anything, remove all Google accounts from the phone. Settings then Accounts then tap each Google account and remove it. This avoids the FRP verification screen that appears after flashing if accounts were still linked.
- Create a Backup: Copy your data to your computer or an SD card. Flashing replaces the entire software on the phone, which means all personal data, apps, and settings will be permanently deleted.
- Charge First: Get the battery above 50% before starting. The flashing process takes a few minutes and the first boot takes several more. A power failure during either stage can leave the device in a state that requires more advanced recovery.
- Prepare Your PC Connection: You need a Windows computer and a USB cable that supports data transfer. Test the cable first by connecting the phone normally, if it shows up in File Explorer, the cable is good.
- Install the Right Drivers:
Install Stock Firmware on Tecno Pop 2 Plus BA2
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Hit the “Download” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
What Is Normal After a Tecno Pop 2 Plus BA2 Flash?
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
Tecno Pop 2 Plus BA2 Flashing Problems and Fixes
- Tecno Pop 2 Plus BA2 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the BA2, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
Missing IMEI or Corrupt Baseband on Tecno Pop 2 Plus BA2 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Frequently Asked Questions
Q1: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
Q2: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q3: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q4: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Pop 2 Plus BA2 running on the MediaTek MT6580P Quad-core 1.3 GHz Cortex-A7 chipset. Even variants of the Pop 2 Plus with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q5: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q7: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q8: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 8.1 Oreo (Go edition) default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
People Also Ask About Tecno Pop 2 Plus BA2
What chipset does the Tecno Pop 2 Plus BA2 use?
The Tecno Pop 2 Plus BA2 uses the MediaTek MT6580P Quad-core 1.3 GHz Cortex-A7 chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
What is the latest firmware version for Tecno Pop 2 Plus BA2?
The latest available Tecno Pop 2 Plus BA2 firmware on this page is version V553. This page has 5 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Tecno Pop 2 Plus BA2 erase my data?
Yes. Flashing stock firmware on the Tecno Pop 2 Plus BA2 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Can flashing firmware fix a bricked Tecno Pop 2 Plus BA2?
Yes. If your Tecno Pop 2 Plus BA2 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
Final Thoughts
Your Tecno Pop 2 Plus BA2 should now be running V553 on a clean build. If the first boot takes a while, do not worry, that is completely normal after a fresh flash.
Ran into something unexpected? Leave a comment and describe what happened. Include which step you were on and what error you saw. I will get back to you.
Consider sharing this guide with anyone else who has a Tecno device that needs fixing.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
