Last Updated: June 28, 2026
If your Tecno Pouvoir 4 LC7S is not working right, this page contains the official stock ROM, necessary tools, and a complete walkthrough to restore the device.
Device: Tecno Pouvoir 4 LC7S | Chipset: MediaTek MT6761 Helio A22 | Flash Tool: SP Flash Tool
Android: Android 10, HIOS 6.0 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Pouvoir 4 LC7S (MediaTek MT6761 Helio A22)
Flash Tool: SP Flash Tool
Latest Build: V117
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Pouvoir 4 LC7S Firmware (Flash File) Drivers, Tools & Guide
The Tecno Pouvoir 4 LC7S comes into the repair shop often with bootloops, FRP locks, or issues staying on the boot screen. This guide provides the stock ROM, tools, and steps needed to fix these problems.
Before you begin, extract the firmware to a simple folder path, such as C:FirmwareLC7S. SP Flash Tool can struggle to locate the scatter file if the folder path contains spaces or special characters. This small step prevents frustrating loading errors.
This device launched in 2020 and runs on the MediaTek MT6761 Helio A22 chipset. Because of this, you must use SP Flash Tool and VCOM drivers. There is currently one firmware build available for this specific model. This is the stock ROM you should use for recovery, unbricking, or FRP bypass.
The files provided here come from verified repositories and have been checked for integrity. This page updates as new builds become available. The Tecno Pouvoir 4 LC7S firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip, then confirm the scatter file is present before proceeding.
Flashing restores the phone to its original factory state, which means all your personal data will be lost. That clean wipe is exactly what fixes persistent problems like bootloops, forgotten locks, Google account verification, battery drain, and system errors.
Tecno Pouvoir 4 LC7S Google Account Bypass After Reset
To bypass FRP on Tecno Pouvoir 4 LC7S, use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset, you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is why I always recommend removing your Google account before flashing, it avoids this problem entirely.
How to Wipe Tecno Pouvoir 4 LC7S to Factory Settings
Power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Tecno Pouvoir 4 LC7S to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
How to Pick the Correct Tecno Pouvoir 4 LC7S Firmware
Flashing the wrong firmware will not work. Verify your device details before downloading anything:
- Find Your Model Code: Go to Settings, then About Phone. The code should be “LC7S”. If it is a different variant, do not use this firmware.
- Cross-Check the Chipset: The Pouvoir 4 LC7S uses MediaTek MT6761 Helio A22. If your phone shows a different chipset in recovery mode, stop and find the correct firmware for your hardware.
- Note Your Current Build: Write down the build number shown in About Phone. This helps you compare versions and decide whether to upgrade or reflash the same version.
- Boot Into Recovery: Recovery mode (Volume Up + Power while off) is the safest way to double-check your model info before committing to a flash.
- Check Download Size: After downloading, verify the file size matches the table on this page. Corrupt or partial downloads are a common cause of flash failures.
Common Reasons to Reinstall Tecno Pouvoir 4 LC7S Firmware
The Tecno Pouvoir 4 LC7S uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Update to the latest Android version supported by your phone.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Recover your device when it only boots into recovery mode.
- Repair a phone that shuts down randomly or restarts in a loop.
- Restore system apps that were accidentally removed or corrupted.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Tecno Pouvoir 4 LC7S
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Pouvoir 4 LC7S |
| Firmware Version | V117 |
| File Size | 1.95 GB |
| Android Version | Android 10, HIOS 6.0 |
| Platform | MediaTek MT6761 Helio A22 |
| Release Date | Released 2020, July 23 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V117, download this one. It is the latest Tecno Pouvoir 4 LC7S firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V117 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V117 failed with a flash error | Try the next older version instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V117, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Pouvoir 4 LC7S Firmware
Download the official stock firmware for your Tecno Pouvoir 4 LC7S below. The latest available version is V117. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Pouvoir_4_LC7S_MT6761_V117_201124.zip Size: 1.95 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Pouvoir 4 LC7S (LC7S) should not be confused with other Pouvoir 4 variants that may have different chipsets or regional firmware. Even devices in the same Pouvoir 4 line can use completely different processors. Always verify your exact model code “LC7S” in Settings > About Phone before downloading any firmware from this page.
- The model code on your phone must match LC7S exactly. Even a single letter variant (like adding or dropping an “i” or “s”) can mean a different chipset inside.
- Your chipset should be MediaTek MT6761 Helio A22. Recovery mode shows this information if you are not sure.
- Do not mix firmware from other download sites with the files on this page.
- If the downloaded file is much smaller than what is listed in the table above, re-download it, partial files will fail.
Prepare Your Tecno Pouvoir 4 LC7S for Flashing
Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Pouvoir 4 LC7S and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Tecno Pouvoir 4 LC7S Firmware Installation Guide
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Hit the “Download” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
Troubleshooting Tecno Pouvoir 4 LC7S Flash Errors
- Tecno Pouvoir 4 LC7S Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the LC7S, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
After Flashing: What Happens Next on Tecno Pouvoir 4 LC7S
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
Missing IMEI or Corrupt Baseband on Tecno Pouvoir 4 LC7S After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Tecno Pouvoir 4 LC7S Firmware FAQ
Q1: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q2: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q3: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q4: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 10, HIOS 6.0 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q5: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.
Q6: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q7: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q8: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
People Also Ask About Tecno Pouvoir 4 LC7S
Can flashing firmware fix a bricked Tecno Pouvoir 4 LC7S?
Yes. If your Tecno Pouvoir 4 LC7S is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
What chipset does the Tecno Pouvoir 4 LC7S use?
The Tecno Pouvoir 4 LC7S uses the MediaTek MT6761 Helio A22 chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
What is the latest firmware version for Tecno Pouvoir 4 LC7S?
The latest available Tecno Pouvoir 4 LC7S firmware on this page is version V117. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Tecno Pouvoir 4 LC7S erase my data?
Yes. Flashing stock firmware on the Tecno Pouvoir 4 LC7S with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Conclusion
You now have everything needed to flash your Tecno Pouvoir 4 LC7S back to stock using SP Flash Tool. The process is straightforward as long as you follow the steps in order and do not skip the driver installation.
Got stuck somewhere? Drop a comment with the error message and the step number. I check comments regularly and will point you in the right direction.
If this worked for you, share the page so others with the same device can find it too.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
