Last Updated: July 13, 2026
This guide provides the official stock ROM, the necessary drivers, and a clear path to fix common software problems on the Tecno Spark Plus K9.
Device: Tecno Spark Plus K9 | Chipset: MediaTek MT6580 (4x 1.3 GHz ARM Cortex-A7) | Flash Tool: SP Flash Tool
Android: Android 7.0 Nougat with HiOS 2.0 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Spark Plus K9 (MediaTek MT6580 (4x 1.3 GHz ARM Cortex-A7))
Flash Tool: SP Flash Tool
Latest Build: V184
Firmware Files: 13 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Spark Plus K9 Firmware (Flash File) Drivers, Tools & Guide
I have been repairing phones for years, and the Tecno Spark Plus K9 is one I see regularly. It usually comes in with bootloop issues, stuck on the Tecno logo, or FRP locks. I have put together everything you need to fix it: the firmware, the tools, and the exact process I use in my workshop.
Before you begin, extract the firmware to a simple folder path, such as C:FirmwareK9. SP Flash Tool sometimes struggles to locate the scatter file if the folder path contains spaces or special characters. This small detail saves a lot of time and prevents errors.
This page lists 13 firmware builds for the Tecno Spark Plus K9, covering multiple Android versions and security patch levels. If one build does not work, try a different version. The Tecno Spark Plus K9 runs on a MediaTek MT6580 (4x 1.3 GHz ARM Cortex-A7) chipset (MediaTek), which means you will use SP Flash Tool and VCOM/MTK drivers for flashing. These are included in the prerequisites below. The stock firmware ships with Android 7.0 Nougat with HiOS 2.0, which determines the default apps, security features, and interface you will see after flashing.
With 13 firmware versions archived for the Tecno Spark Plus K9, this page covers multiple Android builds and security patch levels. The Tecno Spark Plus K9 was released in 2017. I update this page with the latest available firmware builds as they become available.
Your Tecno Spark Plus K9 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
Flashing replaces your current software completely and wipes all personal data. This is by design, it is what clears out FRP locks, bootloops, pattern locks, app crashes, and other software-level problems that a regular reset cannot fix.
How to Wipe Tecno Spark Plus K9 to Factory Settings
To perform a factory reset on the Tecno Spark Plus K9 without a computer, you must power off the device and hold Volume Up and Power simultaneously until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Tecno Spark Plus K9 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
Tecno Spark Plus K9 Google Account Bypass After Reset
The fastest way to bypass FRP on Tecno Spark Plus K9 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Why Flash Stock ROM on Tecno Spark Plus K9?
The Tecno Spark Plus K9 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Recover your device when it only boots into recovery mode.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Repair a phone that shuts down randomly or restarts in a loop.
- Restore the original Tecno stock ROM to keep your warranty valid.
- Update to the latest Android version supported by your phone.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Verify Your Tecno Spark Plus K9 Model Before Downloading
The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Check About Phone: Open Settings and find your exact model number. It should read “K9”, not a similar name, the exact code.
- Match the Chipset: This firmware is built for MediaTek MT6580 (4x 1.3 GHz ARM Cortex-A7). If your device has a different processor, it will not flash correctly.
- Look at the Build Number: The build string in your current software should reference the Spark Plus line. Cross-check it with the firmware table below.
- Check Recovery Mode: Power off, hold Volume Up + Power until recovery appears. The screen displays your chipset and current build, use this to confirm.
- Compare File Details: Make sure the version listed in the download table matches what you expect for your device and region.
Firmware Details for Tecno Spark Plus K9
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Spark Plus K9 |
| Firmware Version | V160, V184, V95, V28, V39 |
| File Size | 1.4 GB to 1.72 GB |
| Android Version | Android 7.0 Nougat with HiOS 2.0 |
| Platform | MediaTek MT6580 (4x 1.3 GHz ARM Cortex-A7) |
| Release Date | Released 2017, July |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V184, download this one. It is the latest Tecno Spark Plus K9 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V160, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V184 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V184 failed with a flash error | Try V160 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V184, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Spark Plus K9 Firmware
Download the official stock firmware for your Tecno Spark Plus K9 below. The latest available version is V184. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Spark_Plus_K9_MT6580_V160_171109_7.0.zip Size: 1.7 GB | Download Link | Download Link2 |
| File Name: Tecno_Spark_Plus_K9_(K9-H8018AB-N-180124V184).zip Size: 1.66 GB | Download Link | Download Link2 |
| File Name: Tecno_Spark_Plus_K9_MT6580_V160_171109_7.0.zip Size: 1.72 GB | Download Link | Download Link2 |
| File Name: K9-H8018AB-N-170707V95 Size: 1.53 GB | Download Link | Download Link2 |
| File Name: K9-H8018AB-N-171109V160 Size: 1.53 GB | Download Link | Download Link2 |
| File Name: K9-H8018AB-N-180124V184 Size: 1.71 GB | Download Link | Download Link2 |
| File Name: K9-H8018C-N-EG-170808V28 Size: 1.65 GB | Download Link | Download Link2 |
| File Name: K9-H8018C-N-EG-180124V39 Size: 1.51 GB | Download Link | Download Link2 |
| File Name: Tecno K9 (K9-H8018AB-N-180124V184).7z Size: 1.4 GB | Download Link | Download Link2 |
| File Name: Tecno K9 (K9-H8018AB-N-170707V95) Size: N/A | Download Link | Download Link2 |
| File Name: Tecno K9 (K9-H8018AB-N-171109V160) Size: N/A | Download Link | Download Link2 |
| File Name: Tecno K9 (K9-H8018C-N-EG-180124V39).7z Size: 1.4 GB | Download Link | Download Link2 |
| File Name: Tecno Spark Plus K9 (K9-H8018C-N-EG-170808V28) Size: N/A | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Spark Plus K9 (K9) should not be confused with other Spark Plus variants that may have different chipsets or regional firmware. Even devices in the same Spark Plus line can use completely different processors. Always verify your exact model code “K9” in Settings > About Phone before downloading any firmware from this page.
- Go to Settings and verify your model is exactly K9. Phones with similar names can have completely different hardware.
- The chipset in your device should be MediaTek MT6580 (4x 1.3 GHz ARM Cortex-A7). If it is different, this firmware will not work.
- Always download directly from the table on this page to ensure you have the correct build.
- Check the file size after downloading, a mismatch with the listed size means a partial or corrupt download.
Before You Start: Tecno Spark Plus K9 Requirements
Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Spark Plus K9 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Tecno Spark Plus K9 Firmware Installation Guide
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Prepare the Flash Files:
- Go to the download section and grab the firmware package that matches your device.
- Unzip the file to a folder on your desktop. Avoid using folder names with non-English characters or spaces, the flash tool may not read them correctly.
- Confirm Driver Setup:
- The drivers listed in prerequisites need to be installed and working before you connect the phone. If you are not sure, reinstall them and restart your computer.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Click “Download” to kick off the firmware write.
- Hands off the phone and cable until the tool shows completion. Moving or disconnecting the device mid-flash is the most common cause of a bricked phone.
- Wait and Reboot:
- When you see the success message, disconnect the USB cable.
- Hold the power button to boot the phone. Give it a solid 5 to 8 minutes for the first startup, this is normal.
What Is Normal After a Tecno Spark Plus K9 Flash?
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
Troubleshooting Tecno Spark Plus K9 Flash Errors
- Tecno Spark Plus K9 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the K9, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
Missing IMEI or Corrupt Baseband on Tecno Spark Plus K9 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Tecno Spark Plus K9 Flashing FAQ
Q1: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q2: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q3: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q4: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q5: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q6: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.
Q7: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 7.0 Nougat with HiOS 2.0 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q8: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Spark Plus K9 running on the MediaTek MT6580 (4x 1.3 GHz ARM Cortex-A7) chipset. Even variants of the Spark Plus with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
People Also Ask About Tecno Spark Plus K9
What is the latest firmware version for Tecno Spark Plus K9?
The latest available Tecno Spark Plus K9 firmware on this page is version V184. This page has 13 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
What chipset does the Tecno Spark Plus K9 use?
The Tecno Spark Plus K9 uses the MediaTek MT6580 (4x 1.3 GHz ARM Cortex-A7) chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
Can flashing firmware fix a bricked Tecno Spark Plus K9?
Yes. If your Tecno Spark Plus K9 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
Will flashing firmware on Tecno Spark Plus K9 erase my data?
Yes. Flashing stock firmware on the Tecno Spark Plus K9 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Final Thoughts
That is everything you need to safely flash the official Tecno Spark Plus K9 firmware (V184) using SP Flash Tool and get your device working again. If you followed each step, your phone should now be running on a clean build.
If something did not go as expected, a specific error, a step that is not working for your setup, leave a comment below with as much detail as you can: the exact error message, which step you are on, and what you have already tried. I read every comment and will help you work through it.
If this guide helped you, consider sharing it, it is the best way to help someone else who is dealing with the same problem.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
