Ensure you only download firmware that is fully compatible with your exact device model. Refer to the firmware selection guide above if you are uncertain.
Important: The Tecno Pop 5 LTE BD4i (BD4i) should not be confused with other Pop 5 LTE variants that might have different chipsets or region-specific firmware. Even devices within the same Pop 5 LTE series can use entirely different processors. Always verify your precise model code “BD4i” in Settings > About Phone before downloading any firmware from this page.
- Navigate to Settings and confirm your model is exactly BD4i. Phones with similar names can possess entirely different internal hardware.
- Your device’s chipset needs to be MediaTek MT6761 Helio A22. If it is a different chipset, this firmware will not function correctly.
- Always download firmware directly from the table on this page to ensure you receive the correct and verified build.
- After downloading, check the file size. A discrepancy with the listed size usually means a partial or corrupted download.
Before You Start: Tecno Pop 5 LTE BD4i Requirements
Do not skip this section, as most failed Tecno flashes happen because preparation steps are overlooked. For the Tecno Pop 5 LTE BD4i and other MediaTek devices, proper VCOM driver installation is crucial. Your Windows computer might show the device in Device Manager, but SP Flash Tool will still not recognize it if the correct VCOM driver is not installed.
- IMEI Backup: Open the dialer and type *#06#. Write down both IMEI numbers on paper or capture a screenshot. These numbers are essential if you ever need to repair your IMEI after flashing.
- Remove All Google Accounts: Go to Settings, then Accounts, and sign out of every Google account linked to your device. Keeping accounts signed in will trigger an FRP lock after a flash, preventing you from setting up the phone.
- Backup Everything: Transfer all your photos, contacts, messages, and WhatsApp data to a computer or cloud storage. The flashing process will return the phone to its factory state, erasing all personal content.
- Minimum 50% Battery: Do not start the flashing process with a low battery. If the power supply is interrupted during the flash, your device can become unresponsive and much harder to fix.
- USB Cable and Computer: Use a reliable USB data-transfer cable and a Windows PC. Avoid USB hubs and connect the cable directly to a motherboard port for the most stable connection.
- Download and Install Drivers:
Step-by-Step: Flash Tecno Pop 5 LTE BD4i Stock ROM
To flash the Tecno Pop 5 LTE BD4i, we will use SP Flash Tool. For older devices like this, I typically recommend starting with SP Flash Tool v5.1924. Newer versions often require a DA (Download Agent) file that older firmware packages do not include, which can lead to “Auth” errors. If SP Flash Tool consistently asks for an authentication file you do not have, try MTK Client instead, as it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and proceed with the instructions below. For a more comprehensive guide, consult the complete SP Flash Tool guide.
- Download and Extract Files:
- Download the correct Tecno Pop 5 LTE BD4i firmware package using the links provided above.
- Extract the ZIP archive to a straightforward folder path; avoid using paths with spaces or special characters, as some flash tools may have difficulty with them.
- Install Necessary Drivers:
- Confirm that all drivers listed earlier are installed on your computer and that your PC has been restarted after installation. Failing to restart is a common reason why drivers do not function properly.
- Load the Firmware File:
- In SP Flash Tool, click the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and choose the “scatter.txt” file.
- Connect Your Device:
- Completely power off your phone; ensure it is not just in sleep mode.
- Connect the device to your PC using the USB cable. The flash tool should detect it automatically.
- Initiate Flashing:
- Click the “Download” button to start the flashing process.
- It is important not to disconnect the device, move the cable, or touch the phone until the entire process is complete. Interrupting the flash can lead to bricking the device.
- Wait for Completion and Reboot:
- Once the flashing successfully finishes, you may disconnect the device.
- Power on your device. The initial boot after a flash will take longer than usual, often up to 8 minutes, so be patient.
Fix Common Tecno Pop 5 LTE BD4i Firmware Errors
- Tecno Pop 5 LTE BD4i Not Recognized by SP Flash Tool:
- This is usually a driver issue, not a cable problem. Reinstall the VCOM drivers specifically for the BD4i, restart your computer, and try again before troubleshooting anything else.
- If the driver reinstall does not help, switch to a USB 2.0 port. USB 3.0 ports can sometimes cause detection problems with MediaTek devices more often than expected.
- Still no luck? Temporarily disable your antivirus software. It can interfere with the VCOM driver loading without displaying any error messages.
- Boot Loop After Flashing:
- Access recovery mode and perform a factory reset from there. Most bootloops on MediaTek devices after flashing are due to conflicts with old cached data; a wipe from recovery typically resolves this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool shows an error immediately when you attempt to start the download, verify your scatter file first. An incorrect scatter file for your device build is one of the most frequent causes of flash errors.
- “Download DA FAIL” Error:
- This error appears quite frequently. It almost always indicates that the VCOM driver is not installed correctly. Reinstall the driver, restart your PC, and attempt the process again. If the issue persists, consider switching to SP Flash Tool v5.1924, as older devices sometimes respond better to that version.
- Error 8038 (BROM Error):
- This error means the device is not properly entering BROM mode. Ensure the phone is completely powered off and, if possible, remove the battery for 30 seconds. Reconnect it and try again. For some MediaTek devices, you might need to hold the Volume Down button while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer SP Flash Tool versions require a DA (Download Agent) authentication file for devices that have Secure Boot enabled. If you do not have this file, opt for MTK Client instead; it bypasses Secure Boot automatically and offers a simpler solution.
After Flashing: What Happens Next on Tecno Pop 5 LTE BD4i
Here is what you can expect and what is considered normal following a successful Tecno Pop 5 LTE BD4i firmware flash:
- Confirmation of Successful Flash: SP Flash Tool will display a green circle or checkmark upon completion. This indicates that the flashing process was successful.
- Connectivity Check: Wi-Fi, Bluetooth, and mobile data should all function correctly after the initial setup. If mobile data is not connecting, go to Settings, then SIM and Network, and manually re-enter your APN details. The flash sometimes erases carrier APN settings.
- Initial Setup Prompt: The phone may prompt you to select language and region again, which is a normal part of the process after a fresh flash. You are essentially starting from a clean slate, so the setup wizard runs as if the phone were brand new.
- Google Account Re-addition: Exercise caution when re-adding your Google account. If you did not remove it prior to flashing, you might encounter an FRP prompt. Add your account during the initial setup wizard, rather than attempting to do so later through Settings.
- IMEI Verification: Immediately after setup, dial *#06# to check your IMEI numbers. Do this before inserting a SIM card. If they show as “unknown” or “null”, follow the IMEI repair guide below before proceeding with anything else.
- Available Storage: You will notice almost full storage capacity available since all your applications and files have been removed. The system partition size varies by firmware version, but it is typically between 4 to 8 GB on most devices.
- Security Features: Fingerprint and face unlock data are wiped during the flash. You will need to re-register your fingerprints and face data from scratch within the security settings.
Missing IMEI or Corrupt Baseband on Tecno Pop 5 LTE BD4i After Flashing?
A missing or unknown IMEI is a frequent issue I encounter after flashing MediaTek devices. This occurs because the NVRAM partition, which stores vital information like your IMEI and calibration data, sometimes does not remain intact during the flashing process. While it may seem alarming, it is usually fixable. Here is the recommended procedure:
- Begin with Driver Check: First, install the Mediatek CDC Driver if you have not already. Without this driver, IMEI repair tools will not detect your device, and this is a step many people miss.
- Choose a Repair Tool: SN Write Tool is my primary choice; it is user-friendly and effective for most MTK devices. Maui Meta serves as a reliable alternative if SN Write does not establish a connection. You can find more details on using SN Write Tool here.
- Execute the Repair:
- Connect your device to your computer.
- Input the original IMEI numbers for both SIM slots. These are the numbers you recorded before initiating the flash.
- Click “Start” and allow the process to complete without interrupting the connection.
- Verify After Reboot: Once the process finishes, restart your phone and dial *#06#. Your IMEI numbers should now be visible. If they still appear as null, repeat the process; sometimes the first attempt does not fully complete.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Questions About Tecno Pop 5 LTE BD4i Firmware
Q1: My device is not detected by SP Flash Tool. What should I do?
A: The first step is to address the drivers. Reinstall the VCOM drivers, restart your PC, and then attempt the connection again. If you are using a USB 3.0 port, try switching to a USB 2.0 port. Also, consider temporarily disabling your antivirus software. If these steps do not work, please leave a comment with the exact error message you are receiving.
Q2: Can I go back to an older firmware version?
A: While technically possible with certain MediaTek builds, downgrading firmware can introduce new security vulnerabilities and lead to app compatibility problems. If the latest version is causing issues, describe them in a comment below, as there is often a better solution than reverting to an older build.
Q3: What if the flash fails halfway through?
A: Remain calm and do not disconnect your phone. Close SP Flash Tool, reopen it, and then try the flashing process again from the beginning. In most cases, a failed flash simply means the procedure needs to be repeated. Your device should usually still be detectable by the flash tool even after an incomplete attempt.
Q4: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool will reset the device to its factory state, including the default Android 11, HIOS 7.6 (Go Edition) settings. All applications, photos, contacts, and linked accounts will be removed. It is crucial to back up everything you need before starting, as data recovery is not possible once the flash is complete.
Q5: How do I enter recovery mode?
A: To enter recovery mode, ensure your device is completely powered off. Then, press and hold the Volume Up + Power buttons simultaneously until the recovery menu appears on the screen. The recovery menu displays the device’s build number, which can be useful for verifying your firmware version before flashing.
Q6: Is it safe to flash during a power outage risk?
A: It is highly advisable to avoid flashing your device if there is a risk of a power outage. If your PC loses power during the flashing process, it can corrupt the device’s internal memory and render the phone unbootable. If you are in an area with unstable electricity, using a laptop with a fully charged battery is a safer alternative to a desktop computer.
Q7: How long does the flashing process take?
A: The actual flashing process typically lasts between 3 and 10 minutes, depending on the size of the firmware and the speed of your USB connection. The first boot after flashing will then take an additional 3 to 8 minutes. It is important not to interfere with the device during either of these stages. If the progress bar in SP Flash Tool appears to be stuck, allow a few more minutes before concluding that something has gone wrong.
Q8: Is this firmware compatible with other Tecno models?
A: No, this firmware is specifically designed for the Tecno Pop 5 LTE BD4i, which operates on the MediaTek MT6761 Helio A22 chipset. Even other variants within the Pop 5 LTE family with a different letter suffix might have a completely different internal chipset. Flashing incorrect firmware can put your phone into a state that is very challenging to recover from. Always confirm your exact model number in Settings before proceeding.
People Also Ask About Tecno Pop 5 LTE BD4i
Can flashing firmware fix a bricked Tecno Pop 5 LTE BD4i?
Yes. If your Tecno Pop 5 LTE BD4i is displaying a persistent logo, is stuck in a bootloop, or fails to power on, flashing the official stock firmware using SP Flash Tool can restore it to a functional state. This procedure is a standard repair method employed by service centers for Tecno devices.
How do I check my Tecno Pop 5 LTE BD4i model number before flashing?
To verify your model number, navigate to Settings > About Phone on your Tecno Pop 5 LTE BD4i and look for the model designation “BD4i”. Alternatively, you can enter recovery mode (by holding Volume Up + Power when the device is off), which will display the build number and model code. It is crucial to match this information precisely with the firmware filename before you begin flashing.
What chipset does the Tecno Pop 5 LTE BD4i use?
The Tecno Pop 5 LTE BD4i is equipped with the MediaTek MT6761 Helio A22 chipset. This means that you will need SP Flash Tool and the appropriate VCOM/MTK USB drivers to flash its firmware. MediaTek devices use a scatter-file-based flashing method, which differs from procedures for Qualcomm (QFIL) or Samsung (Odin) devices.
Will flashing firmware on Tecno Pop 5 LTE BD4i erase my data?
Yes. When you flash stock firmware on the Tecno Pop 5 LTE BD4i with SP Flash Tool, a full factory reset is performed. This process will remove all applications, photos, contacts, and linked accounts from your device. Therefore, it is essential to back up any important data before starting, as there is no way to recover information after the flashing process is complete.
Final Thoughts
Now that the flashing process is complete, your Tecno Pop 5 LTE BD4i is running on its official stock firmware and should be free from the problems that led you to this guide.
If anything occurred differently than described—an error message, or a step that did not align with your setup—please post it in the comments section. I make sure to respond to every question.
This guide is updated whenever new builds are released, so you can revisit it anytime you need a more recent version of the Tecno Pop 5 LTE BD4i firmware.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Please follow the instructions on this page carefully. I cannot be held responsible for any damage that may occur to your device, but I will always endeavor to assist if something goes wrong.
Last Updated: July 27, 2026
This guide provides everything you need for your Tecno Pop 5 LTE BD4i: official firmware, necessary drivers, the correct flash tool, and detailed steps to fix issues like bootloops, bypass FRP locks, or perform a clean system reinstallation.
Device: Tecno Pop 5 LTE BD4i | Chipset: MediaTek MT6761 Helio A22 | Flash Tool: SP Flash Tool
Android: Android 11, HIOS 7.6 (Go Edition) | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Pop 5 LTE BD4i (MediaTek MT6761 Helio A22)
Flash Tool: SP Flash Tool
Latest Build: V413
Firmware Files: 38 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Pop 5 LTE BD4i Firmware (Flash File) Drivers, Tools & Guide
Finding the right resources for Tecno Pop 5 LTE BD4i firmware can be tricky, but this page combines everything. This particular model often comes into the shop for FRP locks, bootloop issues, or when it is stuck on the Tecno logo. I have gathered the necessary firmware, tools, and the exact procedure I follow for these repairs.
Here is a small tip before you start: extract the firmware files to a simple folder path, such as C:FirmwareBD4i. SP Flash Tool occasionally struggles to locate the scatter file if the folder name contains spaces or other special characters. It is a minor detail that can save you from puzzling over why the tool is not loading the file correctly.
The Tecno Pop 5 LTE BD4i uses a MediaTek MT6761 Helio A22 chipset, so SP Flash Tool and the appropriate VCOM/MTK drivers are needed for flashing. These drivers are listed in the prerequisites section below. This guide offers 38 different firmware builds for the Tecno Pop 5 LTE BD4i, covering various Android versions and security updates. If one version does not resolve your problem, try another. Keep in mind that since the Tecno Pop 5 LTE BD4i was released in 2021, you might need to manually install USB drivers on newer Windows systems (like Windows 10 or 11) instead of relying on automatic detection.
We have checked the integrity of these firmware files using three separate sources to confirm they are authentic, unmodified stock ROMs. With 38 different Tecno Pop 5 LTE BD4i firmware versions available, this page provides extensive coverage for multiple Android builds and security patch levels.
The Tecno Pop 5 LTE BD4i firmware is provided as a compressed ZIP file. Download it and extract the contents using WinRAR or 7-Zip. Once extracted, open the folder to ensure the scatter file is present before proceeding with the flashing process.
Flashing completely replaces your device’s software and erases all personal data. This is how it works to remove FRP locks, resolve bootloops, bypass pattern locks, fix app crashes, and address other software issues that a standard factory reset cannot fix.
Remove FRP Lock on Tecno Pop 5 LTE BD4i
To quickly bypass FRP on the Tecno Pop 5 LTE BD4i, you can use an Android apps launcher to access settings during the initial setup. After flashing or a factory reset, you might encounter a Google account lock (FRP). Our free Android apps launcher offers the fastest method to get past this. It is also why I always suggest removing your Google account before flashing; it avoids this issue entirely.
Hard Reset Tecno Pop 5 LTE BD4i
To factory reset the Tecno Pop 5 LTE BD4i without a computer, turn off the device completely, then press and hold both the Volume Up and Power buttons simultaneously until the recovery menu appears. Use the volume keys to move to “Wipe Data/Factory Reset” and confirm your selection with the Power button.
A hard reset removes all data and restores your Tecno Pop 5 LTE BD4i to its original settings. This typically resolves common software issues such as slow performance, application crashes, forgotten screen locks, and bootloops. If problems continue after a factory reset, a full firmware flash using SP Flash Tool, as detailed in the upcoming sections, is the next step.
Tecno Pop 5 LTE BD4i Firmware Compatibility Check
The most frequent error I see is people flashing firmware intended for a different device variant. Before you download anything, confirm your device’s exact model:
- Check About Phone: Your device’s model name must be precisely “BD4i”. Even minor differences in the model code can indicate a completely different chipset or partition layout.
- Confirm Chipset Type: This firmware is specifically for the MediaTek MT6761 Helio A22. Using it on a device with a different chipset will cause it to fail or potentially brick the phone.
- Review Your Current Firmware Version: Compare the build number on your device with the versions listed in the download section to select the most suitable file.
- Use Recovery Mode: If you cannot access the device’s settings due to a lock or boot issue, boot into recovery mode to view the build and chipset details displayed on the screen.
- Consider Regional Compatibility: Some Tecno firmware packages are designed for specific regions. Make sure the firmware you download is compatible with your device’s original market.
When Should You Flash Tecno Pop 5 LTE BD4i?
You should flash your Tecno Pop 5 LTE BD4i using SP Flash Tool when dealing with software issues on its MediaTek chipset. Flashing the stock firmware can provide solutions for several problems, including:
- Removing persistent malware or adware that remains after a factory reset.
- Correcting startup loops, system lagging, or freezing on your device.
- Resolving touchscreen unresponsiveness caused by a corrupted operating system build.
- Unlocking a device that has become locked or disabled.
- Fixing non-functional Wi-Fi, Bluetooth, or mobile data connectivity issues that appeared after a software update.
- Repairing a phone that experiences random shutdowns or continuous restarts.
- Recovering from specific “Download DA FAIL” errors and Secure Boot authentication problems that are common with your device’s MediaTek chipset.
Learn more about stock ROMs and why flashing works.
Firmware Details for Tecno Pop 5 LTE BD4i
Here is a quick overview of the official Tecno Pop 5 LTE BD4i firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Pop 5 LTE BD4i |
| Firmware Version | V23, V92, V185, V207, V220, V231, V248, V273, V341, V380, V395, V403, V405, V407, V413, V409, V411, V291, V292 |
| File Size | 1.76 GB to 2.13 GB |
| Android Version | Android 11, HIOS 7.6 (Go Edition) |
| Platform | MediaTek MT6761 Helio A22 |
| Release Date | Released 2021, November 25 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is a common question, so I have created a straightforward guide below. Locate your specific issue in the table to find the recommended Tecno Pop 5 LTE BD4i firmware file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V413, this is the latest Tecno Pop 5 LTE BD4i firmware available. Start here. |
| FRP / Google account lock only | Refer to the FRP bypass guide above; you will most likely not need a full firmware flash for this. |
| Phone slow after a recent OTA update | Try V411, sometimes an older, stable build works better if the latest OTA introduces new bugs. |
| IMEI missing after a previous flash | Re-flash V413 first, then consult the IMEI repair guide. Do not skip the reflash step. |
| V413 failed with a flash error | Attempt V411 instead and double-check your scatter file selection before assuming the firmware itself is the issue. |
| Restoring to factory / warranty repair | V413, for a clean, fresh start. |
My general rule for MediaTek devices is always to try the latest firmware version first. I have observed many people spending unnecessary time trying older builds when the newest one would have worked perfectly. Only switch to an older version if the latest fails repeatedly, and ensure you are addressing a driver problem, not a firmware issue.
Download Tecno Pop 5 LTE BD4i Firmware
You can download the official stock firmware for your Tecno Pop 5 LTE BD4i from the links below. The most current version available is V413. After downloading, confirm the file size matches what is listed in the table; a size discrepancy usually indicates a partial or corrupted download, which can lead to more problems if flashed.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V23_211209.zip Size: 2 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V92_220106.zip Size: 2 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V185_220217.zip Size: 2.05 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V207_220324.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V220_220520.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V231_211209.zip Size: 2 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V248_220824.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V273_230323.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V341_220212.zip Size: 2.05 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V380_220324.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V395_220520.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V403_220824.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V405_221017.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V407_221107.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Pop_5_LTE_BD4i_MT6761_V413_230302.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656CDE-RGo-GL-F2-230323V273.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656C-RGo-GL-230302V413.zip Size: 2.09 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656C-RGo-GL-221212V409.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656C-RGo-GL-221107V407.zip Size: 2.09 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656C-RGo-GL-221017V405.zip Size: 2.09 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656C-RGo-GL-220824V403.zip Size: 2.13 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656CDE-RGo-GL-F2-220824V248.zip Size: 2.12 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656C-RGo-GL-220520V395.zip Size: 2.12 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656CDE-RGo-GL-F2-220520V220.zip Size: 2.12 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656C-RGo-GL-220324V380.zip Size: 2.09 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656CDE-RGo-GL-F2-220324V207.zip Size: 2.09 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656CDE-RGo-GL-F2-220217V185.zip Size: 2.08 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656C-RGo-GL-220212V341.zip Size: 2.07 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656CDE-RGo-GL-F2-220106V92.zip Size: 2.07 GB | Download Link | Download Link2 |
| File Name: BD4i-XQ656C-RGo-GL-211209V231.zip Size: 2.05 GB | Download Link | Download Link2 |
| File Name: TECNO-POP-LTE-BD4i-XQ656C-RGo-GL-230210V411-Flash-File.zip Size: 2.07 GB | Download Link | Download Link2 |
| File Name: TECNO-POP-5-LTE-BD4i-XQ656C-RGo-GL-221107V407-Flash-File.zip Size: 2.09 GB | Download Link | Download Link2 |
| File Name: TECNO-POP-5-LTE-BD4i-XQ656C-RGo-GL-220824V403-Flash-File.zip Size: 2.13 GB | Download Link | Download Link2 |
| File Name: TECNO-POP-5-LTE-BD4i-XQ656C-RGo-GL-220324V380-Flash-File.zip Size: 2.09 GB | Download Link | Download Link2 |
| File Name: TECNO-POP-5-LTE-BD4i-XQ656C-RGo-GL-220212V341-Flash-File.zip Size: 2.07 GB | Download Link | Download Link2 |
| File Name: TECNO-POP-5-LTE-BD4i-XQ656C-RGo-GL-211209V231-Flash-File.rar Size: 1.76 GB | Download Link | Download Link2 |
| File Name: Tecno_POP_5_LTE_(BD4i-XQ656C-RGo-GL-221017V291).zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: Tecno_POP_5_LTE_(BD4i-XQ656C-RGo-GL-221107V292).zip Size: 2.1 GB | Download Link | Download Link2 |
Ensure you only download firmware that is fully compatible with your exact device model. Refer to the firmware selection guide above if you are uncertain.
Important: The Tecno Pop 5 LTE BD4i (BD4i) should not be confused with other Pop 5 LTE variants that might have different chipsets or region-specific firmware. Even devices within the same Pop 5 LTE series can use entirely different processors. Always verify your precise model code “BD4i” in Settings > About Phone before downloading any firmware from this page.
- Navigate to Settings and confirm your model is exactly BD4i. Phones with similar names can possess entirely different internal hardware.
- Your device’s chipset needs to be MediaTek MT6761 Helio A22. If it is a different chipset, this firmware will not function correctly.
- Always download firmware directly from the table on this page to ensure you receive the correct and verified build.
- After downloading, check the file size. A discrepancy with the listed size usually means a partial or corrupted download.
Before You Start: Tecno Pop 5 LTE BD4i Requirements
Do not skip this section, as most failed Tecno flashes happen because preparation steps are overlooked. For the Tecno Pop 5 LTE BD4i and other MediaTek devices, proper VCOM driver installation is crucial. Your Windows computer might show the device in Device Manager, but SP Flash Tool will still not recognize it if the correct VCOM driver is not installed.
- IMEI Backup: Open the dialer and type *#06#. Write down both IMEI numbers on paper or capture a screenshot. These numbers are essential if you ever need to repair your IMEI after flashing.
- Remove All Google Accounts: Go to Settings, then Accounts, and sign out of every Google account linked to your device. Keeping accounts signed in will trigger an FRP lock after a flash, preventing you from setting up the phone.
- Backup Everything: Transfer all your photos, contacts, messages, and WhatsApp data to a computer or cloud storage. The flashing process will return the phone to its factory state, erasing all personal content.
- Minimum 50% Battery: Do not start the flashing process with a low battery. If the power supply is interrupted during the flash, your device can become unresponsive and much harder to fix.
- USB Cable and Computer: Use a reliable USB data-transfer cable and a Windows PC. Avoid USB hubs and connect the cable directly to a motherboard port for the most stable connection.
- Download and Install Drivers:
Step-by-Step: Flash Tecno Pop 5 LTE BD4i Stock ROM
To flash the Tecno Pop 5 LTE BD4i, we will use SP Flash Tool. For older devices like this, I typically recommend starting with SP Flash Tool v5.1924. Newer versions often require a DA (Download Agent) file that older firmware packages do not include, which can lead to “Auth” errors. If SP Flash Tool consistently asks for an authentication file you do not have, try MTK Client instead, as it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and proceed with the instructions below. For a more comprehensive guide, consult the complete SP Flash Tool guide.
- Download and Extract Files:
- Download the correct Tecno Pop 5 LTE BD4i firmware package using the links provided above.
- Extract the ZIP archive to a straightforward folder path; avoid using paths with spaces or special characters, as some flash tools may have difficulty with them.
- Install Necessary Drivers:
- Confirm that all drivers listed earlier are installed on your computer and that your PC has been restarted after installation. Failing to restart is a common reason why drivers do not function properly.
- Load the Firmware File:
- In SP Flash Tool, click the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and choose the “scatter.txt” file.
- Connect Your Device:
- Completely power off your phone; ensure it is not just in sleep mode.
- Connect the device to your PC using the USB cable. The flash tool should detect it automatically.
- Initiate Flashing:
- Click the “Download” button to start the flashing process.
- It is important not to disconnect the device, move the cable, or touch the phone until the entire process is complete. Interrupting the flash can lead to bricking the device.
- Wait for Completion and Reboot:
- Once the flashing successfully finishes, you may disconnect the device.
- Power on your device. The initial boot after a flash will take longer than usual, often up to 8 minutes, so be patient.
Fix Common Tecno Pop 5 LTE BD4i Firmware Errors
- Tecno Pop 5 LTE BD4i Not Recognized by SP Flash Tool:
- This is usually a driver issue, not a cable problem. Reinstall the VCOM drivers specifically for the BD4i, restart your computer, and try again before troubleshooting anything else.
- If the driver reinstall does not help, switch to a USB 2.0 port. USB 3.0 ports can sometimes cause detection problems with MediaTek devices more often than expected.
- Still no luck? Temporarily disable your antivirus software. It can interfere with the VCOM driver loading without displaying any error messages.
- Boot Loop After Flashing:
- Access recovery mode and perform a factory reset from there. Most bootloops on MediaTek devices after flashing are due to conflicts with old cached data; a wipe from recovery typically resolves this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool shows an error immediately when you attempt to start the download, verify your scatter file first. An incorrect scatter file for your device build is one of the most frequent causes of flash errors.
- “Download DA FAIL” Error:
- This error appears quite frequently. It almost always indicates that the VCOM driver is not installed correctly. Reinstall the driver, restart your PC, and attempt the process again. If the issue persists, consider switching to SP Flash Tool v5.1924, as older devices sometimes respond better to that version.
- Error 8038 (BROM Error):
- This error means the device is not properly entering BROM mode. Ensure the phone is completely powered off and, if possible, remove the battery for 30 seconds. Reconnect it and try again. For some MediaTek devices, you might need to hold the Volume Down button while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer SP Flash Tool versions require a DA (Download Agent) authentication file for devices that have Secure Boot enabled. If you do not have this file, opt for MTK Client instead; it bypasses Secure Boot automatically and offers a simpler solution.
After Flashing: What Happens Next on Tecno Pop 5 LTE BD4i
Here is what you can expect and what is considered normal following a successful Tecno Pop 5 LTE BD4i firmware flash:
- Confirmation of Successful Flash: SP Flash Tool will display a green circle or checkmark upon completion. This indicates that the flashing process was successful.
- Connectivity Check: Wi-Fi, Bluetooth, and mobile data should all function correctly after the initial setup. If mobile data is not connecting, go to Settings, then SIM and Network, and manually re-enter your APN details. The flash sometimes erases carrier APN settings.
- Initial Setup Prompt: The phone may prompt you to select language and region again, which is a normal part of the process after a fresh flash. You are essentially starting from a clean slate, so the setup wizard runs as if the phone were brand new.
- Google Account Re-addition: Exercise caution when re-adding your Google account. If you did not remove it prior to flashing, you might encounter an FRP prompt. Add your account during the initial setup wizard, rather than attempting to do so later through Settings.
- IMEI Verification: Immediately after setup, dial *#06# to check your IMEI numbers. Do this before inserting a SIM card. If they show as “unknown” or “null”, follow the IMEI repair guide below before proceeding with anything else.
- Available Storage: You will notice almost full storage capacity available since all your applications and files have been removed. The system partition size varies by firmware version, but it is typically between 4 to 8 GB on most devices.
- Security Features: Fingerprint and face unlock data are wiped during the flash. You will need to re-register your fingerprints and face data from scratch within the security settings.
Missing IMEI or Corrupt Baseband on Tecno Pop 5 LTE BD4i After Flashing?
A missing or unknown IMEI is a frequent issue I encounter after flashing MediaTek devices. This occurs because the NVRAM partition, which stores vital information like your IMEI and calibration data, sometimes does not remain intact during the flashing process. While it may seem alarming, it is usually fixable. Here is the recommended procedure:
- Begin with Driver Check: First, install the Mediatek CDC Driver if you have not already. Without this driver, IMEI repair tools will not detect your device, and this is a step many people miss.
- Choose a Repair Tool: SN Write Tool is my primary choice; it is user-friendly and effective for most MTK devices. Maui Meta serves as a reliable alternative if SN Write does not establish a connection. You can find more details on using SN Write Tool here.
- Execute the Repair:
- Connect your device to your computer.
- Input the original IMEI numbers for both SIM slots. These are the numbers you recorded before initiating the flash.
- Click “Start” and allow the process to complete without interrupting the connection.
- Verify After Reboot: Once the process finishes, restart your phone and dial *#06#. Your IMEI numbers should now be visible. If they still appear as null, repeat the process; sometimes the first attempt does not fully complete.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Questions About Tecno Pop 5 LTE BD4i Firmware
Q1: My device is not detected by SP Flash Tool. What should I do?
A: The first step is to address the drivers. Reinstall the VCOM drivers, restart your PC, and then attempt the connection again. If you are using a USB 3.0 port, try switching to a USB 2.0 port. Also, consider temporarily disabling your antivirus software. If these steps do not work, please leave a comment with the exact error message you are receiving.
Q2: Can I go back to an older firmware version?
A: While technically possible with certain MediaTek builds, downgrading firmware can introduce new security vulnerabilities and lead to app compatibility problems. If the latest version is causing issues, describe them in a comment below, as there is often a better solution than reverting to an older build.
Q3: What if the flash fails halfway through?
A: Remain calm and do not disconnect your phone. Close SP Flash Tool, reopen it, and then try the flashing process again from the beginning. In most cases, a failed flash simply means the procedure needs to be repeated. Your device should usually still be detectable by the flash tool even after an incomplete attempt.
Q4: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool will reset the device to its factory state, including the default Android 11, HIOS 7.6 (Go Edition) settings. All applications, photos, contacts, and linked accounts will be removed. It is crucial to back up everything you need before starting, as data recovery is not possible once the flash is complete.
Q5: How do I enter recovery mode?
A: To enter recovery mode, ensure your device is completely powered off. Then, press and hold the Volume Up + Power buttons simultaneously until the recovery menu appears on the screen. The recovery menu displays the device’s build number, which can be useful for verifying your firmware version before flashing.
Q6: Is it safe to flash during a power outage risk?
A: It is highly advisable to avoid flashing your device if there is a risk of a power outage. If your PC loses power during the flashing process, it can corrupt the device’s internal memory and render the phone unbootable. If you are in an area with unstable electricity, using a laptop with a fully charged battery is a safer alternative to a desktop computer.
Q7: How long does the flashing process take?
A: The actual flashing process typically lasts between 3 and 10 minutes, depending on the size of the firmware and the speed of your USB connection. The first boot after flashing will then take an additional 3 to 8 minutes. It is important not to interfere with the device during either of these stages. If the progress bar in SP Flash Tool appears to be stuck, allow a few more minutes before concluding that something has gone wrong.
Q8: Is this firmware compatible with other Tecno models?
A: No, this firmware is specifically designed for the Tecno Pop 5 LTE BD4i, which operates on the MediaTek MT6761 Helio A22 chipset. Even other variants within the Pop 5 LTE family with a different letter suffix might have a completely different internal chipset. Flashing incorrect firmware can put your phone into a state that is very challenging to recover from. Always confirm your exact model number in Settings before proceeding.
People Also Ask About Tecno Pop 5 LTE BD4i
Can flashing firmware fix a bricked Tecno Pop 5 LTE BD4i?
Yes. If your Tecno Pop 5 LTE BD4i is displaying a persistent logo, is stuck in a bootloop, or fails to power on, flashing the official stock firmware using SP Flash Tool can restore it to a functional state. This procedure is a standard repair method employed by service centers for Tecno devices.
How do I check my Tecno Pop 5 LTE BD4i model number before flashing?
To verify your model number, navigate to Settings > About Phone on your Tecno Pop 5 LTE BD4i and look for the model designation “BD4i”. Alternatively, you can enter recovery mode (by holding Volume Up + Power when the device is off), which will display the build number and model code. It is crucial to match this information precisely with the firmware filename before you begin flashing.
What chipset does the Tecno Pop 5 LTE BD4i use?
The Tecno Pop 5 LTE BD4i is equipped with the MediaTek MT6761 Helio A22 chipset. This means that you will need SP Flash Tool and the appropriate VCOM/MTK USB drivers to flash its firmware. MediaTek devices use a scatter-file-based flashing method, which differs from procedures for Qualcomm (QFIL) or Samsung (Odin) devices.
Will flashing firmware on Tecno Pop 5 LTE BD4i erase my data?
Yes. When you flash stock firmware on the Tecno Pop 5 LTE BD4i with SP Flash Tool, a full factory reset is performed. This process will remove all applications, photos, contacts, and linked accounts from your device. Therefore, it is essential to back up any important data before starting, as there is no way to recover information after the flashing process is complete.
Final Thoughts
Now that the flashing process is complete, your Tecno Pop 5 LTE BD4i is running on its official stock firmware and should be free from the problems that led you to this guide.
If anything occurred differently than described—an error message, or a step that did not align with your setup—please post it in the comments section. I make sure to respond to every question.
This guide is updated whenever new builds are released, so you can revisit it anytime you need a more recent version of the Tecno Pop 5 LTE BD4i firmware.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Please follow the instructions on this page carefully. I cannot be held responsible for any damage that may occur to your device, but I will always endeavor to assist if something goes wrong.
