Last Updated: July 21, 2026
This page provides the complete stock ROM package, correct drivers, and a detailed guide for the Tecno Phantom V Flip2 AE11. You will find the necessary tools, step-by-step instructions, and troubleshooting tips all in one place to help you fix software problems. ⚡ At a Glance Device: Tecno Phantom V Flip2 AE11 | Chipset: MediaTek Dimensity 8020 (6 nm) | Flash Tool: SP Flash Tool Android: Android 14, HIOS 14 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) ⚠ Warning: Flashing erases all data. Back up first. Quick Summary Device: Tecno Phantom V Flip2 AE11 (MediaTek Dimensity 8020 (6 nm)) Flash Tool: SP Flash Tool Latest Build: V3525 Firmware Files: 2 available What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Phantom V Flip2 AE11 Firmware (Flash File) Drivers, Tools & Guide
Tecno phones come in regularly with software issues like FRP locks, bootloops, or getting stuck on the logo. This guide covers all of it. I have put everything you need in one place: the firmware, the tools, and the exact process I use myself.
One thing I always recommend before you start: extract the firmware to a simple folder path, something like C:\Firmware\AE11. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. It is a small thing, but it saves a frustrating few minutes of wondering why the tool is not loading the file.
Released in 2024, the Tecno Phantom V Flip2 AE11 has been on the market long enough that multiple firmware builds are available, giving you options if one version causes issues. The stock firmware ships with Android 14, HIOS 14, which determines the default apps, security features, and interface you will see after flashing. The Tecno Phantom V Flip2 AE11 runs on a MediaTek Dimensity 8020 (6 nm) chipset (MediaTek), which means you will use SP Flash Tool and VCOM/MTK drivers for flashing. These are included in the prerequisites below.
As a Transsion Holdings brand, Tecno devices share similar chipset architectures and flashing procedures across the Phantom V Flip2 lineup. This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page.
Your Tecno Phantom V Flip2 AE11 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
A full flash will erase everything on the device: apps, accounts, photos, and settings. That is the point, it gives you a clean slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.
Remove FRP Lock on Tecno Phantom V Flip2 AE11
The fastest way to bypass FRP on Tecno Phantom V Flip2 AE11 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Reset Tecno Phantom V Flip2 AE11 From Recovery Mode
To factory reset Tecno Phantom V Flip2 AE11 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Tecno Phantom V Flip2 AE11 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
Verify Your Tecno Phantom V Flip2 AE11 Model Before Downloading
The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Check About Phone: Open Settings and find your exact model number. It should read “AE11”, not a similar name, the exact code.
- Match the Chipset: This firmware is built for MediaTek Dimensity 8020 (6 nm). If your device has a different processor, it will not flash correctly.
- Look at the Build Number: The build string in your current software should reference the Phantom V Flip2 line. Cross-check it with the firmware table below.
- Check Recovery Mode: Power off, hold Volume Up + Power until recovery appears. The screen displays your chipset and current build, use this to confirm.
- Compare File Details: Make sure the version listed in the download table matches what you expect for your device and region.
Common Reasons to Reinstall Tecno Phantom V Flip2 AE11 Firmware
The Tecno Phantom V Flip2 AE11 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Recover your device when it only boots into recovery mode.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Unlock your device if it has been locked or disabled.
- Fix startup loops, lagging, and freezing on your device.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Tecno Phantom V Flip2 AE11
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Phantom V Flip2 AE11 |
| Firmware Version | V2913, V3525 |
| File Size | 5.4 GB to 7.9 GB |
| Android Version | Android 14, HIOS 14 |
| Platform | MediaTek Dimensity 8020 (6 nm) |
| Release Date | Released 2024, October |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V3525, download this one. It is the latest Tecno Phantom V Flip2 AE11 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V2913, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V3525 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V3525 failed with a flash error | Try V2913 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V3525, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Phantom V Flip2 AE11 Firmware
Download the official stock firmware for your Tecno Phantom V Flip2 AE11 below. The latest available version is V3525. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Phantom_V_Flip_2_5G_AE11_MT6893_IN_V2913_240725.zip Size: 7.9 GB | Download Link | Download Link2 |
| File Name: AE11-H911A-U-BASE-240711V3525 Factory Signed Firmware.zip Size: 5.4 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Phantom V Flip2 AE11 (AE11) should not be confused with other Phantom V Flip2 variants that may have different chipsets or regional firmware. Even devices in the same Phantom V Flip2 line can use completely different processors. Always verify your exact model code “AE11” in Settings > About Phone before downloading any firmware from this page.
- Open About Phone and make sure the model code reads AE11. Do not rely on the name printed on the phone case.
- Verify the chipset is MediaTek Dimensity 8020 (6 nm). You can see this in recovery mode or by checking the device specifications online.
- Use only the download links provided on this page.
- After downloading, right-click the file and check Properties to confirm the size matches the table above. If it does not, download it again.
Prepare Your Tecno Phantom V Flip2 AE11 for Flashing
Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Phantom V Flip2 AE11 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- IMEI Backup: Open the dialer and enter *#06#. Write both IMEI numbers down on paper or take a screenshot. If you ever need to repair your IMEI after flashing, these are essential.
- Remove All Google Accounts: Go to Settings, Accounts, and sign out of every Google account on the device. Leaving accounts signed in triggers FRP lock after a flash, which blocks you from setting up the phone.
- Backup Everything: Photos, contacts, messages, WhatsApp data, move it all to a computer or cloud service. The flash will restore the phone to factory state with nothing on it.
- 50% Battery Minimum: Do not start with a low battery. If power cuts out during the flash, the device can become unresponsive and much harder to fix.
- USB Cable and Computer: Use a proper data-transfer USB cable and a Windows PC. Avoid USB hubs, connect directly to the motherboard port for a stable connection.
- Download and Install Drivers:
Tecno Phantom V Flip2 AE11 Firmware Installation Guide
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Download and Unpack:
- Pick the correct firmware version from the downloads above and save it to your PC.
- Extract the ZIP file. If the extracted folder contains another ZIP inside, extract that one too. You should end up with the actual firmware files, not another archive.
- Driver Check:
- Double-check that you have installed the required drivers. A missing driver is the most common reason the flash tool cannot detect your phone. Reboot your PC after installing.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Start the flash by clicking “Download”.
- Leave everything untouched until completion. Even bumping the USB cable can interrupt the write and cause a failed flash.
- Wait and Reboot:
- The flash is complete when the tool shows a success indicator. Disconnect your phone.
- Turn the phone on. Do not worry if it sits on the boot logo for several minutes, the system is rebuilding itself from scratch.
Tecno Phantom V Flip2 AE11 Flashing Problems and Fixes
- Tecno Phantom V Flip2 AE11 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the AE11, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
What to Expect After Flashing
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
Missing IMEI or Corrupt Baseband on Tecno Phantom V Flip2 AE11 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Common Questions About Flashing Tecno Phantom V Flip2 AE11
Q1: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q2: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q3: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q4: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q5: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.
Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q7: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q8: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
People Also Ask About Tecno Phantom V Flip2 AE11
Will flashing firmware on Tecno Phantom V Flip2 AE11 erase my data?
Yes. Flashing stock firmware on the Tecno Phantom V Flip2 AE11 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Tecno Phantom V Flip2 AE11 model number before flashing?
Go to Settings > About Phone on your Tecno Phantom V Flip2 AE11 and look for the model number “AE11”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Tecno Phantom V Flip2 AE11?
Yes. If your Tecno Phantom V Flip2 AE11 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
What is the latest firmware version for Tecno Phantom V Flip2 AE11?
The latest available Tecno Phantom V Flip2 AE11 firmware on this page is version V3525. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Tecno Phantom V Flip2 AE11 Firmware, Final Notes
You now have everything needed to flash your Tecno Phantom V Flip2 AE11 back to stock using SP Flash Tool. The process is straightforward as long as you follow the steps in order and do not skip the driver installation.
Got stuck somewhere? Drop a comment with the error message and the step number. I check comments regularly and will point you in the right direction.
If this worked for you, share the page so others with the same device can find it too.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
