Last Updated: June 29, 2026
Need to restore your Tecno Pop X KN8 to working condition? Below you will find the official stock ROM, flash tool downloads, driver links, and a complete walkthrough from start to finish.
Device: Tecno Pop X KN8 | Chipset: MediaTek Dimensity 6400 (6 nm) | Flash Tool: SP Flash Tool
Android: Android 16, HIOS 16 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Pop X KN8 (MediaTek Dimensity 6400 (6 nm))
Flash Tool: SP Flash Tool
Latest Build: 16.2.0.110SP23
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Pop X KN8 Firmware (Flash File) Drivers, Tools & Guide
To fix software problems on the Tecno Pop X KN8, you need the official stock firmware, the correct flash tool, and a stable internet connection to download the necessary drivers.
I have fixed many Tecno phones over the years, and the Pop X KN8 often arrives with FRP locks, bootloops, or issues stuck on the logo. This guide consolidates the firmware, tools, and exact steps I use to resolve these problems. One tip I always share: extract the firmware to a simple folder path, such as C:FirmwareKN8. SP Flash Tool can struggle to find the scatter file if the path contains spaces or special characters.
The Tecno Pop X KN8 uses a MediaTek Dimensity 6400 (6 nm) chipset. This means you will rely on SP Flash Tool and VCOM/MTK drivers for the process. The stock firmware runs on Android 16, HIOS 16, which sets the default apps and interface you will see after the flash. The device is relatively new, released in 2026, so you can expect good driver support on modern Windows systems.
This firmware comes from verified repositories. As a Transsion Holdings brand, Tecno devices share similar architectures across the Pop X lineup. The file is a compressed ZIP. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
Flashing replaces your current software completely and wipes all personal data. This is by design, it is what clears out FRP locks, bootloops, pattern locks, app crashes, and other software-level problems that a regular reset cannot fix.
Remove FRP Lock on Tecno Pop X KN8
The fastest way to bypass FRP on Tecno Pop X KN8 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
How to Wipe Tecno Pop X KN8 to Factory Settings
To perform a factory reset on a Tecno Pop X KN8 without a computer, power the device off completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Tecno Pop X KN8 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
How to Pick the Correct Tecno Pop X KN8 Firmware
The most critical step before downloading is verifying your exact device identity to ensure you match the correct firmware file.
- Identify Your Device Model: Go to About Phone and confirm your model is Tecno Pop X KN8. Check the full model string, not just the name.
- Verify the Build Number: Look for the identifier “KN8” in your device build details.
- Confirm the Chipset: According to Tecno specifications, the Pop X KN8 runs on MediaTek Dimensity 6400 (6 nm).
- Match the Firmware Version: Check the version and regional details against what is listed in the download table above.
- Verify in Recovery Mode: If you are not sure about the chipset or build number, boot into recovery mode, it displays this information clearly and is the most reliable way to confirm before you flash.
Common Reasons to Reinstall Tecno Pop X KN8 Firmware
The MediaTek chipset in the Tecno Pop X KN8 requires SP Flash Tool for recovery, and flashing the stock firmware resolves various software issues.
- Restore system apps that were accidentally removed or corrupted.
- Resolve OTA update failures and battery drain issues.
- Repair a phone that shuts down randomly or restarts in a loop.
- Restore the original Tecno stock ROM to keep your warranty valid.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Tecno Pop X KN8
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Pop X KN8 |
| Firmware Version | 16.2.0.110SP23 |
| File Size | 8.2 GB |
| Android Version | Android 16, HIOS 16 |
| Platform | MediaTek Dimensity 6400 (6 nm) |
| Release Date | Released 2026, April 24 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
You should select the appropriate firmware version based on your specific phone condition using the table below.
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | 16.2.0.110SP23, download this one. It is the latest Tecno Pop X KN8 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash 16.2.0.110SP23 first, then follow the IMEI repair guide. Do not skip the reflash. |
| 16.2.0.110SP23 failed with a flash error | Try the next older version instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | 16.2.0.110SP23, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Pop X KN8 Firmware
You can download the official stock firmware for the Tecno Pop X KN8 from the link provided below. The latest available version is 16.2.0.110SP23. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Spark_50_5G_KN8_MT6835_16.2.0.110SP23_TR001PF001AZ_010126_MXML.zip Size: 8.2 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Pop X KN8 (KN8) should not be confused with other Pop X variants that may have different chipsets or regional firmware. Even devices in the same Pop X line can use completely different processors. Always verify your exact model code “KN8” in Settings > About Phone before downloading any firmware from this page.
- The model code on your phone must match KN8 exactly. Even a single letter variant (like adding or dropping an “i” or “s”) can mean a different chipset inside.
- Your chipset should be MediaTek Dimensity 6400 (6 nm). Recovery mode shows this information if you are not sure.
- Do not mix firmware from other download sites with the files on this page.
- If the downloaded file is much smaller than what is listed in the table above, re-download it, partial files will fail.
Before You Start: Tecno Pop X KN8 Requirements
Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Pop X KN8 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
- Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
- Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
- Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
- Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
- Set Up Drivers:
Tecno Pop X KN8 Firmware Installation Guide
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Download and Unpack:
- Pick the correct firmware version from the downloads above and save it to your PC.
- Extract the ZIP file. If the extracted folder contains another ZIP inside, extract that one too. You should end up with the actual firmware files, not another archive.
- Driver Check:
- Double-check that you have installed the required drivers. A missing driver is the most common reason the flash tool cannot detect your phone. Reboot your PC after installing.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Start the flash by clicking “Download”.
- Leave everything untouched until completion. Even bumping the USB cable can interrupt the write and cause a failed flash.
- Wait and Reboot:
- The flash is complete when the tool shows a success indicator. Disconnect your phone.
- Turn the phone on. Do not worry if it sits on the boot logo for several minutes, the system is rebuilding itself from scratch.
Troubleshooting Tecno Pop X KN8 Flash Errors
- Tecno Pop X KN8 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the KN8, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
Normal Behavior After Installing Tecno Pop X KN8 Firmware
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
Missing IMEI or Corrupt Baseband on Tecno Pop X KN8 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Tecno Pop X KN8 Flashing FAQ
Q1: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q2: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q3: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q4: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q5: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
Q6: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q7: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Pop X KN8 running on the MediaTek Dimensity 6400 (6 nm) chipset. Even variants of the Pop X with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q8: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
People Also Ask About Tecno Pop X KN8
What is the latest firmware version for Tecno Pop X KN8?
The latest available Tecno Pop X KN8 firmware on this page is version 16.2.0.110SP23. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
How do I check my Tecno Pop X KN8 model number before flashing?
Go to Settings > About Phone on your Tecno Pop X KN8 and look for the model number “KN8”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Will flashing firmware on Tecno Pop X KN8 erase my data?
Yes. Flashing stock firmware on the Tecno Pop X KN8 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Can flashing firmware fix a bricked Tecno Pop X KN8?
Yes. If your Tecno Pop X KN8 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
Wrapping Up: Tecno Pop X KN8 Firmware
That is everything you need to safely flash the official Tecno Pop X KN8 firmware (16.2.0.110SP23) using SP Flash Tool and get your device working again. If you followed each step, your phone should now be running on a clean build.
If something did not go as expected, a specific error, a step that is not working for your setup, leave a comment below with as much detail as you can: the exact error message, which step you are on, and what you have already tried. I read every comment and will help you work through it.
If this guide helped you, consider sharing it, it is the best way to help someone else who is dealing with the same problem.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
