Last Updated: August 2, 2026
Use this guide to fix the Tecno Spark 10 Pro KI7. I have gathered the official stock ROM, drivers, and step-by-step instructions to resolve bootloops, screen locks, and FRP issues.
Device: Tecno Spark 10 Pro KI7 | Chipset: MediaTek MT6769H Helio G88 | Flash Tool: SP Flash Tool
Android: Android 13, HIOS 12.6 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Spark 10 Pro KI7 (MediaTek MT6769H Helio G88)
Flash Tool: SP Flash Tool
Latest Build: V7510AACDGHJKLMN
Firmware Files: 6 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Spark 10 Pro KI7 Firmware: Flash File, Drivers, and Tools Guide
This guide provides the official Tecno Spark 10 Pro KI7 firmware and necessary tools to restore your device to working condition.
I fix Tecno phones often, and the Spark 10 Pro KI7 shows up frequently with bootloops or FRP locks. This guide covers the process I use. Before you start, extract the firmware to a simple folder path, such as C:FirmwareKI7. SP Flash Tool can have trouble locating the scatter file if the folder path contains spaces or special characters.
This page lists 6 firmware builds for the Tecno Spark 10 Pro KI7, covering multiple Android versions and security patch levels. The stock firmware ships with Android 13, HIOS 12.6, which determines the default apps and security features you will see after flashing. The Tecno Spark 10 Pro KI7 runs on a MediaTek MT6769H Helio G88 chipset, meaning you will use SP Flash Tool and VCOM/MTK drivers for flashing.
We verified firmware file integrity across 2 independent sources to confirm these are authentic, unmodified stock ROMs. Your Tecno Spark 10 Pro KI7 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. A full flash will erase everything on the device: apps, accounts, photos, and settings. This gives you a clean slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.
How to Factory Reset Tecno Spark 10 Pro KI7 Without a PC
To factory reset Tecno Spark 10 Pro KI7 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Tecno Spark 10 Pro KI7 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
How to Bypass Google Lock on Tecno Spark 10 Pro KI7
The fastest way to bypass FRP on Tecno Spark 10 Pro KI7 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Why You Should Flash Stock ROM on Tecno Spark 10 Pro KI7
Flashing the stock ROM on the Tecno Spark 10 Pro KI7 fixes software errors that standard resets cannot resolve.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Resolve OTA update failures and battery drain issues.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Remove persistent malware or adware that survives a factory reset.
- Recover your device when it only boots into recovery mode.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Which Firmware Version Does Your Tecno Spark 10 Pro KI7 Need?
Select the correct firmware version for your Tecno Spark 10 Pro KI7 by verifying your exact model number and build details in the settings menu.
- Identify Your Device Model: Go to About Phone and confirm your model is Tecno Spark 10 Pro KI7. Check the full model string, not just the name.
- Verify the Build Number: Look for the identifier “KI7” in your device build details.
- Confirm the Chipset: According to Tecno specifications, the Spark 10 Pro KI7 runs on MediaTek MT6769H Helio G88.
- Match the Firmware Version: Check the version and regional details against what is listed in the download table above.
- Verify in Recovery Mode: If you are not sure about the chipset or build number, boot into recovery mode, it displays this information clearly and is the most reliable way to confirm before you flash.
Firmware Details for Tecno Spark 10 Pro KI7
The official Tecno Spark 10 Pro KI7 firmware runs on Android 13 and HIOS 12.6, using a MediaTek MT6769H Helio G88 processor.
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Spark 10 Pro KI7 |
| Firmware Version | V607, V7510AACDGHJKLMN, V7510AGJ |
| File Size | 3.9 GB to 4.69 GB |
| Android Version | Android 13, HIOS 12.6 |
| Platform | MediaTek MT6769H Helio G88 |
| Release Date | Released 2023, March 22 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
Choose the specific firmware version for your Tecno Spark 10 Pro KI7 situation by matching the symptoms listed in the table below.
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V7510AACDGHJKLMN, download this one. It is the latest Tecno Spark 10 Pro KI7 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V607, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V7510AACDGHJKLMN first, then follow the IMEI repair guide. Do not skip the reflash. |
| V7510AACDGHJKLMN failed with a flash error | Try V607 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V7510AACDGHJKLMN, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Spark 10 Pro KI7 Firmware
Download the official stock firmware for your Tecno Spark 10 Pro KI7 from the links provided below, ensuring the file size matches the specifications.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Spark_10_Pro_KI7_MT6768_V607_221230.zip Size: 4.3 GB | Download Link | Download Link2 |
| File Name: KI7-V7510AACDGHJKLMN-T-GL-230517V2420.zip Size: 4.69 GB | Download Link | Download Link2 |
| File Name: KI7-V7510AGJ-T-TR-230323V1713.zip Size: 3.96 GB | Download Link | Download Link2 |
| File Name: KI7-V7510AACDGHJKLMN-T-GL-230318V1631.zip Size: 4.58 GB | Download Link | Download Link2 |
| File Name: KI7-V7510AACDGHJKLMN-T-GL-221230V607.zip Size: 4.38 GB | Download Link | Download Link2 |
| File Name: Spark 10 Pro Ki7 Dump Firmware Last Security 2024 Via TFM Tool.7z Size: 3.9 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Spark 10 Pro KI7 (KI7) should not be confused with other Spark 10 Pro variants that may have different chipsets or regional firmware. Even devices in the same Spark 10 Pro line can use completely different processors. Always verify your exact model code “KI7” in Settings > About Phone before downloading any firmware from this page.
- Go to Settings and verify your model is exactly KI7. Phones with similar names can have completely different hardware.
- The chipset in your device should be MediaTek MT6769H Helio G88. If it is different, this firmware will not work.
- Always download directly from the table on this page to ensure you have the correct build.
- Check the file size after downloading, a mismatch with the listed size means a partial or corrupt download.
How to Prepare Your Tecno Spark 10 Pro KI7 for Flashing
Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Spark 10 Pro KI7 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
How to Install Firmware on Tecno Spark 10 Pro KI7
Install the Tecno Spark 10 Pro KI7 firmware using SP Flash Tool by following the scatter file loading and download process outlined below.
- Prepare the Flash Files:
- Go to the download section and grab the firmware package that matches your device.
- Unzip the file to a folder on your desktop. Avoid using folder names with non-English characters or spaces, the flash tool may not read them correctly.
- Confirm Driver Setup:
- The drivers listed in prerequisites need to be installed and working before you connect the phone. If you are not sure, reinstall them and restart your computer.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Click “Download” to kick off the firmware write.
- Hands off the phone and cable until the tool shows completion. Moving or disconnecting the device mid-flash is the most common cause of a bricked phone.
- Wait and Reboot:
- When you see the success message, disconnect the USB cable.
- Hold the power button to boot the phone. Give it a solid 5 to 8 minutes for the first startup, this is normal.
What Is Normal After a Tecno Spark 10 Pro KI7 Flash?
Expect a clean factory state and a slow first boot after successfully flashing the Tecno Spark 10 Pro KI7.
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
How to Troubleshoot Tecno Spark 10 Pro KI7 Flash Errors
- Tecno Spark 10 Pro KI7 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the KI7, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
How to Fix Missing IMEI on Tecno Spark 10 Pro KI7 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Questions About Tecno Spark 10 Pro KI7 Firmware
Q1: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q2: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q3: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q4: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.
Q5: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q6: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q7: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Spark 10 Pro KI7 running on the MediaTek MT6769H Helio G88 chipset. Even variants of the Spark 10 Pro with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q8: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 13, HIOS 12.6 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
People Also Ask About Tecno Spark 10 Pro KI7
Will flashing firmware on Tecno Spark 10 Pro KI7 erase my data?
Yes. Flashing stock firmware on the Tecno Spark 10 Pro KI7 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Can flashing firmware fix a bricked Tecno Spark 10 Pro KI7?
Yes. If your Tecno Spark 10 Pro KI7 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
What chipset does the Tecno Spark 10 Pro KI7 use?
The Tecno Spark 10 Pro KI7 uses the MediaTek MT6769H Helio G88 chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
How do I check my Tecno Spark 10 Pro KI7 model number before flashing?
Go to Settings > About Phone on your Tecno Spark 10 Pro KI7 and look for the model number “KI7”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Tecno Spark 10 Pro KI7 Firmware, Final Notes
Your Tecno Spark 10 Pro KI7 should now be running V7510AACDGHJKLMN on a clean build. If the first boot takes a while, do not worry, that is completely normal after a fresh flash.
Ran into something unexpected? Leave a comment and describe what happened. Include which step you were on and what error you saw. I will get back to you.
Consider sharing this guide with anyone else who has a Tecno device that needs fixing.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
