Last Updated: July 1, 2026
All resources to restore your Tecno Phantom V Flip AD11 are available here. Download the official stock firmware, acquire the necessary tools, and follow the step-by-step guide. This page also covers troubleshooting steps and IMEI repair solutions.
Device: Tecno Phantom V Flip AD11 | Chipset: MediaTek Dimensity 8050 (MT6893) | Flash Tool: SP Flash Tool
Android: Android 13, HIOS 13.5 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Phantom V Flip AD11 (MediaTek Dimensity 8050 (MT6893))
Flash Tool: SP Flash Tool
Latest Build: V4666
Firmware Files: 2 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Phantom V Flip AD11 Firmware (Flash File) Drivers, Tools & Guide
The Tecno Phantom V Flip AD11 frequently requires firmware restoration due to common issues like FRP locks, bootloop problems, or getting stuck at the Tecno logo. This comprehensive guide provides the official stock firmware, required tools, and a detailed flashing procedure to resolve these problems. All necessary components are consolidated here for your convenience.
Before proceeding with the flash, extract the firmware package to a simple folder path like C:FirmwareAD11. SP Flash Tool may encounter difficulties locating the scatter file if the folder path contains spaces or special characters. This precaution prevents unnecessary troubleshooting and saves time when the tool fails to load the file.
This page offers two firmware versions for the Tecno Phantom V Flip AD11. Choose the one that matches your current Android version for optimal results. The device utilizes a MediaTek Dimensity 8050 (MT6893) chipset, necessitating SP Flash Tool and VCOM/MTK drivers for flashing. These drivers are listed in the prerequisites section. After installation, the device will run Android 13 with HIOS 13.5, which determines the default applications, security features, and user interface.
Tecno devices under Transsion Holdings share similar chipset architectures and flashing procedures across the Phantom V Flip lineup. The Tecno Phantom V Flip AD11 was released in 2023. This page is updated with the latest available firmware builds as they are released.
Your Tecno Phantom V Flip AD11 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extraction, open the folder and verify the presence of the scatter file before continuing.
>Please be aware that flashing completely overwrites the software partitions. All data, applications, and accounts will be removed. This full wipe is essential for resolving deep software issues, including FRP locks, boot failures, connectivity problems, and application crashes.
Tecno Phantom V Flip AD11 Hard Reset Guide
To perform a factory reset on the Tecno Phantom V Flip AD11 without a computer, power off the device completely. Then simultaneously hold Volume Up and Power until the recovery menu appears. Navigate to “Wipe Data/Factory Reset” using the volume keys and confirm with the Power button.
A hard reset erases all data and returns the Tecno Phantom V Flip AD11 to its original factory state. This resolves most software problems such as slow performance, application crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
Tecno Phantom V Flip AD11 Google Account Bypass After Reset
The quickest method to bypass FRP on the Tecno Phantom V Flip AD11 involves using a free Android apps launcher that provides access to settings during the initial setup wizard. After flashing or performing a factory reset, you may encounter a Google account lock (FRP). Our free Android apps launcher offers the fastest solution. For this reason, removing your Google account before flashing is always recommended to avoid this problem entirely.
Common Reasons to Reinstall Tecno Phantom V Flip AD11 Firmware
The Tecno Phantom V Flip AD11 features a MediaTek chipset, making SP Flash Tool the standard method for firmware recovery on MTK devices. Here are the situations where flashing stock firmware can help:
- Resolve Wi-Fi, Bluetooth, or mobile data connectivity issues that developed after an update.
- Unlock the device if it has been locked or disabled.
- Repair a phone that randomly shuts down or restarts in a continuous loop.
- Clear a forgotten screen lock, PIN, or pattern without requiring the original credentials.
- Update to the latest Android version supported by your phone.
- Recover the device when it only boots into recovery mode.
- Resolve “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Tecno Phantom V Flip AD11 Firmware Compatibility Check
The most frequent error people make is flashing firmware intended for a different variant. Before downloading anything, verify your exact device identity:
- Check About Phone: Navigate to Settings and confirm your exact model number. It must display “AD11”, not a similar name, but the precise code.
- Match the Chipset: This firmware is designed for MediaTek Dimensity 8050 (MT6893). If your device uses a different processor, flashing will fail.
- Examine the Build Number: The build string in your current software should reference the Phantom V Flip line. Compare it with the firmware table below.
- Verify Recovery Mode: Power off, then hold Volume Up + Power until recovery appears. The screen shows your chipset and current build, use this for confirmation.
- Compare File Details: Ensure the version in the download table matches what you expect for your device and region.
Firmware Details for Tecno Phantom V Flip AD11
Here is a concise overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Phantom V Flip AD11 |
| Firmware Version | V944, V4666 |
| File Size | 5.2 GB to 7.2 GB |
| Android Version | Android 13, HIOS 13.5 |
| Platform | MediaTek Dimensity 8050 (MT6893) |
| Release Date | Released 2023, October 01 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the most common question I receive, so I have created a straightforward guide. Find your situation in the table and proceed to the appropriate file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V4666, download this version. It is the latest Tecno Phantom V Flip AD11 firmware available. |
| FRP / Google account lock only | Refer to the FRP bypass guide above, you likely do not require the full firmware for this issue. |
| Phone slow after a recent OTA update | Try V944, sometimes the latest OTA introduces new bugs and an older build performs better. |
| IMEI missing after a previous flash | Re-flash V4666 first, then follow the IMEI repair guide. Do not skip the reflash step. |
| V4666 failed with a flash error | Try V944 instead and double-check your scatter file selection before assuming the firmware is problematic. |
| Restoring to factory / warranty repair | V4666, provides a clean state and fresh start. |
My general approach with MTK devices: always attempt the latest version first. I have observed users spending considerable time on older builds when the newest one would have functioned correctly. Only consider an older version if the latest fails repeatedly, and confirm you are addressing a driver issue rather than a firmware problem.
Download Tecno Phantom V Flip AD11 Firmware
Download the official stock firmware for your Tecno Phantom V Flip AD11 below. The most recent version is V4666. After downloading, confirm the file size matches the table above, a size discrepancy typically indicates a partial or corrupt download, which can cause additional problems.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: AD11_MT6893_V944_241022.zip Size: 7.2 GB | Download Link | Download Link2 |
| File Name: AD11-H932A-T-IN-240205V4666 Factory Signed Firmware.zip Size: 5.2 GB | Download Link | Download Link2 |
Only download firmware compatible with your exact device model. Refer to the firmware selection guide above if you are uncertain.
Important: The Tecno Phantom V Flip AD11 (AD11) should not be confused with other Phantom V Flip variants that may have different chipsets or regional firmware. Even devices in the same Phantom V Flip line can use entirely different processors. Always verify your exact model code “AD11” in Settings > About Phone before downloading any firmware from this page.
- Your model number is a variant of AD11 with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from MediaTek Dimensity 8050 (MT6893). Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
What You Need Before Flashing Tecno Phantom V Flip AD11
Do not overlook this section. Most failed Tecno flashes result from rushing through preparation steps. VCOM driver installation is critical for the Tecno Phantom V Flip AD11 and other MediaTek devices. Windows may display the device in Device Manager, yet SP Flash Tool will not detect it without the correct VCOM driver installed.
- Record Your IMEI: Open your phone dialer and dial *#06#. Photograph the screen showing both IMEI numbers. You may need these later to restore your IMEI if it gets erased during the flash.
- Sign Out of Google: Navigate to Settings, go to Accounts, and remove every Google account from the device. Skipping this step will cause Google to lock the phone after flashing, requiring an FRP bypass.
- Backup Your Files: Copy all important content to a PC or cloud storage. After flashing, the phone will be completely empty, no applications, no photos, no messages.
- Battery Level: Ensure at least 50% charge. If the phone powers down during flashing, you could end up with a device that refuses to turn on.
- Use the Right Cable: You require a USB data cable capable of file transfer, not just charging. Connect it to a USB 2.0 port on a Windows PC for the most reliable connection.
- Install Drivers:
Install Stock Firmware on Tecno Phantom V Flip AD11
We will use SP Flash Tool for this process. For older devices, I recommend trying SP Flash Tool v5.1924 first. Newer SP Flash Tool versions require a DA (Download Agent) file that older firmware packages do not include, causing “Auth” errors. If SP Flash Tool repeatedly requests an auth file you do not possess, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need additional details.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a straightforward folder path, avoid paths with spaces or special characters, as some flash tools encounter issues with them.
- Install the Required Drivers:
- Confirm all drivers listed above are installed and that your PC has been restarted since installation. Skipping the restart is a common reason drivers fail to function correctly.
- Load the Firmware File:
- Click the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Click the “Download” button to begin.
- Do not disconnect, move the cable, or touch the device until the process completes fully. Disconnecting mid-flash is how devices become unresponsive.
- Wait and Reboot:
- Once flashing completes successfully, disconnect the device.
- Power on your device. The first boot will take longer than usual, allow up to 8 minutes.
Normal Behavior After Installing Tecno Phantom V Flip AD11 Firmware
Here are the expected outcomes after a successful flash:
- How to confirm successful flash: SP Flash Tool will display a green circle or checkmark when complete. If you see this, the flash succeeded.
- Notification sounds and ringtones will revert to factory defaults. Any custom tones you had set previously will need to be re-downloaded and reassigned in Settings.
- First boot requires 3 to 8 minutes, do not force-reboot the device. The operating system is setting up from scratch. Interrupting this can lead to bootloops.
- Stuck in a bootloop after first boot? Enter recovery mode and perform a factory reset from there, see the hard reset guide above. This occurs occasionally and does not indicate incorrect firmware.
- Storage will show nearly full capacity since all your apps and files are gone. The system partition size varies by firmware version but typically ranges from 4 to 8 GB on most devices.
- The device may feel warm during first boot, this is normal. It stabilizes after a few minutes once the initial app setup completes.
- Wi-Fi, Bluetooth, and mobile data should function immediately after setup. If mobile data fails to connect, go to Settings, SIM and Network, and manually re-enter your APN, the flash sometimes clears carrier APN settings.
Common Issues When Flashing Tecno Phantom V Flip AD11
- Tecno Phantom V Flip AD11 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable problem. Reinstall the VCOM drivers for the AD11, restart your PC, and retry before changing anything else.
- If that does not resolve it, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more frequently than expected.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without displaying any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek stem from conflicts with old cached data, a wipe from recovery typically resolves this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error when attempting to start the download, verify your scatter file first. A mismatch between the scatter file and your device build is one of the most frequent causes of flash errors.
- “Download DA FAIL” Error:
- This error appears regularly. It almost always indicates the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If the problem persists, attempt switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and attempt again. Some MediaTek devices require holding Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not possess this file, switch to MTK Client instead, it handles Secure Boot automatically and provides a simpler solution.
Missing IMEI or Corrupt Baseband on Tecno Phantom V Flip AD11 After Flashing?
A missing or unknown IMEI is a common occurrence after a MediaTek flash. This happens because the NVRAM partition, which stores your IMEI and calibration data, may not survive the flash intact. While alarming, it is fixable. Here is the procedure:
- Verify your drivers first: Install the Mediatek CDC Driver if you have not already, without it, IMEI repair tools will not detect your device. This is the step most users overlook.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option to try, it is straightforward and functions on most MTK devices. Maui Meta serves as the alternative if SN Write fails to connect. You can learn more about using SN Write Tool here.
- Execute the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you recorded before flashing.
- Click “Start” and allow the process to complete without interrupting the connection.
- Confirm after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should reappear. If they still show null, repeat the process, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Questions About Tecno Phantom V Flip AD11 Firmware
Q1: How long does the flashing process take?
A: The actual flash typically requires between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes an additional 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stationary, allow it several more minutes before assuming something went wrong.
Q2: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-exclusive. If you are using Mac or Linux, your best option is to employ a Windows virtual machine, or borrow a Windows PC for the 10 minutes needed to complete the flash.
Q3: How do I enter recovery mode?
A: Power the device off completely, then simultaneously hold Volume Up + Power until the recovery menu appears. The recovery menu displays the build number, which you can use to verify your firmware version before flashing.
Q4: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, while alarming, this is fixable. Follow the IMEI repair guide in the troubleshooting section. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q5: My device is not detected by SP Flash Tool. What should I do?
A: Begin with the drivers, reinstall the VCOM drivers, restart your PC, then retry. Switch to a USB 2.0 port if you are using USB 3.0. Temporarily disable your antivirus. If none of these steps work, leave a comment with the exact error message.
Q6: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can introduce security vulnerabilities and application compatibility issues. If the latest version causes trouble, leave a comment below, there is usually a better solution than rolling back.
Q7: Is it safe to flash during a power outage risk?
A: Avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone unbootable. In areas with unreliable power, use a fully charged laptop instead of a desktop.
Q8: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 13 and HIOS 13.5 default settings. All applications, photos, contacts, and accounts will be removed. Back up everything necessary before beginning. Data cannot be recovered once the flash is complete.
People Also Ask About Tecno Phantom V Flip AD11
Can flashing firmware fix a bricked Tecno Phantom V Flip AD11?
Yes. If your Tecno Phantom V Flip AD11 is stuck on the logo, in a bootloop, or will not power on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
Will flashing firmware on Tecno Phantom V Flip AD11 erase my data?
Yes. Flashing stock firmware on the Tecno Phantom V Flip AD11 with SP Flash Tool performs a full factory reset. All applications, photos, contacts, and accounts will be removed. Back up everything important before beginning. Data cannot be recovered after flashing.
What is the latest firmware version for Tecno Phantom V Flip AD11?
The latest available Tecno Phantom V Flip AD11 firmware on this page is version V4666. This page offers 2 firmware builds for download. Refer to the firmware details table above for file sizes and Android versions.
How do I check my Tecno Phantom V Flip AD11 model number before flashing?
Navigate to Settings > About Phone on your Tecno Phantom V Flip AD11 and locate the model number “AD11”. You can also confirm by entering recovery mode (Volume Up + Power while powered off), which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Conclusion
The flash is complete. Your Tecno Phantom V Flip AD11 is now running official stock firmware and should function without the issues that brought you here.
If anything occurs differently than described, an error message, a step that does not match your setup, share it in the comments. I respond to every question.
This guide is updated when new builds are released, so you can return anytime you require a newer version.
Browse all Tecno firmware downloads for additional devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always attempt to assist if something goes wrong.
