Last Updated: June 20, 2026
If your Tecno Camon 30 CL6 is stuck on a logo, locked out, or not responding, this guide covers the full recovery process. It provides the official firmware, the necessary tools, and clear instructions to get the device running again.
Device: Tecno Camon 30 CL6 | Chipset: MediaTek Helio G99 Ultimate | Flash Tool: SP Flash Tool
Android: Android 14, HIOS 14 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Camon 30 CL6 (MediaTek Helio G99 Ultimate)
Flash Tool: SP Flash Tool
Latest Build: V2070
Firmware Files: 5 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Camon 30 CL6 Firmware (Flash File) Drivers, Tools & Guide
The Tecno Camon 30 CL6 comes into the repair queue often, typically with FRP locks, bootloop issues, or a device stuck on the Tecno logo. This guide covers all of it. I have put everything you need in one place: the firmware, the tools, and the exact process I use myself.
I always recommend extracting the firmware to a simple folder path, such as C:FirmwareCL6. SP Flash Tool can sometimes struggle to locate the scatter file if the folder path contains spaces or special characters. This simple step saves time and frustration.
Released in 2024, the Tecno Camon 30 CL6 has been on the market long enough that multiple firmware builds are available, giving you options if one version causes issues. The stock firmware ships with Android 14, HIOS 14, which determines the default apps, security features, and interface you will see after flashing. The Tecno Camon 30 CL6 firmware runs on a MediaTek Helio G99 Ultimate chipset (MediaTek), meaning you will use SP Flash Tool and VCOM/MTK drivers for flashing. These are included in the prerequisites below.
We verified the firmware file integrity across two independent sources to confirm these are authentic, unmodified stock ROMs. As a Transsion Holdings brand, Tecno devices share similar chipset architectures and flashing procedures across the Camon 30 lineup.
Your Tecno Camon 30 CL6 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
Keep in mind that flashing stock firmware erases all data, which is intentional, as it resolves software issues including FRP lock, app problems, slow performance, forgotten pattern locks, a dead or logo-stuck device, Wi-Fi and Bluetooth issues, battery drain, and soft brick situations.
Tecno Camon 30 CL6 FRP Bypass
The fastest way to bypass FRP on Tecno Camon 30 CL6 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Hard Reset Tecno Camon 30 CL6
To factory reset Tecno Camon 30 CL6 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Tecno Camon 30 CL6 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
Choosing the Right Firmware Version
The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Verify Your Exact Model: In Settings, look for the model code “CL6”. Some Tecno phones share the same marketing name but have different internal hardware.
- Confirm the Processor: This build targets the MediaTek Helio G99 Ultimate chipset. You can check your chipset via recovery mode or a hardware info app.
- Review the Version Number: The firmware version in the download table should be close to or newer than what your device is currently running.
- Use Recovery Mode as a Safety Check: Before flashing, boot into recovery to see the current build number and chipset printed on screen. This is the most trustworthy check.
- Verify the Region: Some firmware builds are region-specific. Confirm the download matches your device region or is listed as global.
When Should You Flash Tecno Camon 30 CL6?
The Tecno Camon 30 CL6 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Unlock your device if it has been locked or disabled.
- Recover your device when it only boots into recovery mode.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Remove persistent malware or adware that survives a factory reset.
- Update to the latest Android version supported by your phone.
- Fix startup loops, lagging, and freezing on your device.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Tecno Camon 30 CL6
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Camon 30 CL6 |
| Firmware Version | V2070, V1309, V713 |
| File Size | 6.1 GB to 7 GB |
| Android Version | Android 14, HIOS 14 |
| Platform | MediaTek Helio G99 Ultimate |
| Release Date | Released 2024, April 02 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V2070, download this one. It is the latest Tecno Camon 30 CL6 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V1309, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V2070 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V2070 failed with a flash error | Try V1309 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V2070, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Camon 30 CL6 Firmware
Download the official stock firmware for your Tecno Camon 30 CL6 below. The latest available version is V2070. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: CL6_MT6789_RU_V2070_240718_MXML.zip Size: 6.1 GB | Download Link | Download Link2 |
| File Name: CL6-H898AB-U-TR-240307V1309 Factory Signed Firmware.zip Size: 6.1 GB | Download Link | Download Link2 |
| File Name: Tecno Camon 30 (CL6-H898ABCDJK-U-BASE-251010V713_BASE001PF001AZ).7z Size: 7 GB | Download Link | Download Link2 |
| File Name: Tecno Camon 30 (CL6-H898ABCDJK-U-BASE-251010V713_RU001PF001AZ).7z Size: 6.2 GB | Download Link | Download Link2 |
| File Name: Tecno Camon 30 (CL6-H898ABCDJK-U-BASE-251010V713_TR001PF001AZ).7z Size: 6.5 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Camon 30 CL6 (CL6) should not be confused with other Camon 30 variants that may have different chipsets or regional firmware. Even devices in the same Camon 30 line can use completely different processors. Always verify your exact model code “CL6” in Settings > About Phone before downloading any firmware from this page.
- Go to Settings and verify your model is exactly CL6. Phones with similar names can have completely different hardware.
- The chipset in your device should be MediaTek Helio G99 Ultimate. If it is different, this firmware will not work.
- Always download directly from the table on this page to ensure you have the correct build.
- Check the file size after downloading, a mismatch with the listed size means a partial or corrupt download.
Prerequisites for Tecno Camon 30 CL6 Firmware
Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Camon 30 CL6 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Step-by-Step: Flash Tecno Camon 30 CL6 Stock ROM
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Download and Unpack:
- Pick the correct firmware version from the downloads above and save it to your PC.
- Extract the ZIP file. If the extracted folder contains another ZIP inside, extract that one too. You should end up with the actual firmware files, not another archive.
- Driver Check:
- Double-check that you have installed the required drivers. A missing driver is the most common reason the flash tool cannot detect your phone. Reboot your PC after installing.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Start the flash by clicking “Download”.
- Leave everything untouched until completion. Even bumping the USB cable can interrupt the write and cause a failed flash.
- Wait and Reboot:
- The flash is complete when the tool shows a success indicator. Disconnect your phone.
- Turn the phone on. Do not worry if it sits on the boot logo for several minutes, the system is rebuilding itself from scratch.
Tecno Camon 30 CL6 Flashing Problems and Fixes
- Tecno Camon 30 CL6 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the CL6, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
What to Expect After Flashing
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
Missing IMEI or Corrupt Baseband on Tecno Camon 30 CL6 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Questions About Tecno Camon 30 CL6 Firmware
Q1: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q2: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q3: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 14, HIOS 14 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q4: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q5: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
Q6: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q7: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Camon 30 CL6 running on the MediaTek Helio G99 Ultimate chipset. Even variants of the Camon 30 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q8: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
People Also Ask About Tecno Camon 30 CL6
What chipset does the Tecno Camon 30 CL6 use?
The Tecno Camon 30 CL6 uses the MediaTek Helio G99 Ultimate chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
What is the latest firmware version for Tecno Camon 30 CL6?
The latest available Tecno Camon 30 CL6 firmware on this page is version V2070. This page has 5 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Tecno Camon 30 CL6 erase my data?
Yes. Flashing stock firmware on the Tecno Camon 30 CL6 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Can flashing firmware fix a bricked Tecno Camon 30 CL6?
Yes. If your Tecno Camon 30 CL6 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
Summary
You now have everything needed to flash your Tecno Camon 30 CL6 back to stock using SP Flash Tool. The process is straightforward as long as you follow the steps in order and do not skip the driver installation.
Got stuck somewhere? Drop a comment with the error message and the step number. I check comments regularly and will point you in the right direction.
If this worked for you, share the page so others with the same device can find it too.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
