Last Updated: August 4, 2026
Resolve your CL7k Camon 30 5G issues with the official Tecno Camon 30 5G CL7k firmware. This page provides complete solutions: hard reset procedures, FRP bypass methods, stock firmware files, IMEI repair tools, necessary drivers, and step-by-step instructions.
Device: Tecno Camon 30 5G CL7k | Chipset: MediaTek Dimensity 7020 (MT6855) | Flash Tool: SP Flash Tool
Android: Android 14, HIOS 14 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Camon 30 5G CL7k (MediaTek Dimensity 7020 (MT6855))
Flash Tool: SP Flash Tool
Latest Build: V434
Firmware Files: 3 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Camon 30 5G CL7k Firmware (Flash File) Drivers, Tools & Guide
The Tecno Camon 30 5G CL7k frequently arrives with common software issues like FRP locks, bootloop problems, or getting stuck on the Tecno logo. This guide covers all scenarios with the necessary firmware, tools, and exact procedures I use in practice.
Before starting, extract firmware to a simple folder path like C:FirmwareCL7k. SP Flash Tool may struggle to locate the scatter file if your folder contains spaces or special characters. This small step prevents frustrating delays during file loading.
Three firmware versions are available for the Tecno Camon 30 5G CL7k. Choose the file matching your current Android version for smooth flashing. The stock firmware comes with Android 14 and HIOS 14, which determines default apps, security features, and the interface after flashing. The Tecno Camon 30 5G CL7k uses a MediaTek Dimensity 7020 (MT6855) chipset, requiring SP Flash Tool with VCOM/MTK drivers for flashing. These are included in the prerequisites below.
With three firmware versions archived for the Tecno Camon 30 5G CL7k, this page supports multiple Android builds and security patch levels. As part of Transsion Holdings, Tecno devices share similar chipset architectures and flashing methods across the Camon 30 5G series.
Your Tecno Camon 30 5G CL7k firmware arrives as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extraction, open the folder and verify the presence of the scatter file before proceeding.
A full flash erases all device content: apps, accounts, photos, and settings. This intentional process provides a clean slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.
Reset Tecno Camon 30 5G CL7k From Recovery Mode
To factory reset Tecno Camon 30 5G CL7k without a computer, power off the device completely, then hold Volume Up and Power simultaneously until the recovery menu appears. Use volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and returns Tecno Camon 30 5G CL7k to its original factory condition. This resolves most software issues including slow performance, app crashes, forgotten screen locks, and bootloops. If problems persist after a factory reset, proceed with a full firmware flash using SP Flash Tool as detailed below.
Bypass Google Lock on Tecno Camon 30 5G CL7k
The fastest FRP bypass method for Tecno Camon 30 5G CL7k uses a free Android apps launcher that grants settings access during setup. After flashing or factory reset, you may encounter Google account lock (FRP). Our free Android apps launcher provides the quickest solution. This is why removing your Google account before flashing prevents this issue entirely.
Why Flash Stock ROM on Tecno Camon 30 5G CL7k?
The Tecno Camon 30 5G CL7k uses a MediaTek chipset, making SP Flash Tool the standard firmware recovery method for MTK devices. Flashing stock firmware helps with:
- Resolve touchscreen responsiveness issues from corrupted system builds
- Clear forgotten screen locks, PINs, or patterns without original credentials
- Recover devices stuck in recovery mode
- Restore original Tecno stock ROM to maintain warranty validity
- Fix phones that randomly shut down or restart in loops
- Remove persistent malware or adware surviving factory reset
- Resolve “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek Dimensity 7020 (MT6855) chipset
Learn more about stock ROMs and why flashing works.
Which Firmware Version Does Your Tecno Camon 30 5G CL7k Need?
The most common mistake is flashing firmware for a different variant. Before downloading, verify your exact device identity:
- Check About Phone: Your device model must show “CL7k” exactly. Minor code differences can indicate different chipsets and partition layouts.
- Verify Chipset Type: This firmware targets MediaTek Dimensity 7020 (MT6855) specifically. Flashing on other chipsets will fail or potentially brick the device.
- Compare Firmware Versions: Match your build number with versions listed in the download section to select the correct file.
- Use Recovery Mode: If Settings is inaccessible (phone stuck or locked), boot into recovery to read build and chipset details from the screen.
- Confirm Regional Compatibility: Some Tecno firmware targets specific regions. Ensure the download matches your device origin.
Firmware Details for Tecno Camon 30 5G CL7k
Here are the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Camon 30 5G CL7k |
| Firmware Version | V345, V434 |
| File Size | 6.3 GB to 6.5 GB |
| Android Version | Android 14, HIOS 14 |
| Platform | MediaTek Dimensity 7020 (MT6855) |
| Release Date | Released 2024, April 02 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the most frequent question I receive in comments, so here’s a quick reference. Match your situation to the table below to find the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V434, download this one. It is the latest Tecno Camon 30 5G CL7k firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V345, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V434 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V434 failed with a flash error | Try V345 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V434, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Camon 30 5G CL7k Firmware
Download the official stock firmware for your Tecno Camon 30 5G CL7k below. The latest available version is V434. After downloading, verify the file size matches the table above, a size mismatch usually indicates a partial or corrupt download, and flashing a corrupt file can create more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Camon_30_5G_CL7K_MT6855_IN_V345_240413_MXML.zip Size: 6.3 GB | Download Link | Download Link2 |
| File Name: CL7k-P765AC-U-IN-240413V345.zip Size: 6.3 GB | Download Link | Download Link2 |
| File Name: Tecno Camon 30 5G (CL7k-P765AC-U-OP-250301V434).7z Size: 6.5 GB | Download Link | Download Link2 |
Only download firmware fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Camon 30 5G CL7k (CL7k) should not be confused with other Camon 30 5G variants that may have different chipsets or regional firmware. Even devices in the same Camon 30 5G line can use completely different processors. Always verify your exact model code “CL7k” in Settings > About Phone before downloading any firmware from this page.
- Confirm your exact model is CL7k, check About Phone, not the marketing name on the box.
- Your device must have a MediaTek Dimensity 7020 (MT6855) chipset. Boot into recovery mode to verify if unsure.
- Only use files downloaded from this page. Third-party mirrors may serve modified or incomplete packages.
- Compare the file size against the download table. If it does not match, the download is likely corrupt or incomplete.
Before You Start: Tecno Camon 30 5G CL7k Requirements
Do not skip this section. Most failed Tecno flashes result from rushing through preparation steps. The VCOM driver installation is essential for the Tecno Camon 30 5G CL7k and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Install Stock Firmware on Tecno Camon 30 5G CL7k
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. Newer versions require a DA (Download Agent) file that older firmware packages do not include, causing “Auth” errors. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Prepare the Flash Files:
- Go to the download section and grab the firmware package that matches your device.
- Unzip the file to a folder on your desktop. Avoid using folder names with non-English characters or spaces, the flash tool may not read them correctly.
- Confirm Driver Setup:
- The drivers listed in prerequisites need to be installed and working before you connect the phone. If you are not sure, reinstall them and restart your computer.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Click “Download” to kick off the firmware write.
- Hands off the phone and cable until the tool shows completion. Moving or disconnecting the device mid-flash is the most common cause of a bricked phone.
- Wait and Reboot:
- When you see the success message, disconnect the USB cable.
- Hold the power button to boot the phone. Give it a solid 5 to 8 minutes for the first startup, this is normal.
Post-Flash Behavior on Tecno Camon 30 5G CL7k
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
Fix Common Tecno Camon 30 5G CL7k Firmware Errors
- Tecno Camon 30 5G CL7k Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the CL7k, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
Missing IMEI or Corrupt Baseband on Tecno Camon 30 5G CL7k After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Questions About Tecno Camon 30 5G CL7k Firmware
Q1: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q2: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q3: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Camon 30 5G CL7k running on the MediaTek Dimensity 7020 (MT6855) chipset. Even variants of the Camon 30 5G with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q4: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q5: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q7: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.
Q8: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
People Also Ask About Tecno Camon 30 5G CL7k
What chipset does the Tecno Camon 30 5G CL7k use?
The Tecno Camon 30 5G CL7k uses the MediaTek Dimensity 7020 (MT6855) chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
How do I check my Tecno Camon 30 5G CL7k model number before flashing?
Go to Settings > About Phone on your Tecno Camon 30 5G CL7k and look for the model number “CL7k”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Tecno Camon 30 5G CL7k?
Yes. If your Tecno Camon 30 5G CL7k is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
What is the latest firmware version for Tecno Camon 30 5G CL7k?
The latest available Tecno Camon 30 5G CL7k firmware on this page is version V434. This page has 3 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Conclusion
You now have everything needed to flash your Tecno Camon 30 5G CL7k back to stock using SP Flash Tool. The process is straightforward as long as you follow the steps in order and do not skip the driver installation.
Got stuck somewhere? Drop a comment with the error message and the step number. I check comments regularly and will point you in the right direction.
If this worked for you, share the page so others with the same device can find it too.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
