Last Updated: June 26, 2026
Get your Tecno Camon 18 CH6 back in working order with official firmware. This page has everything you need: hard reset guides, FRP solutions, stock ROM files, IMEI repair tools, and step-by-step instructions.
Device: Tecno Camon 18 CH6 | Chipset: MediaTek MT6768 Helio G90/G90T | Flash Tool: SP Flash Tool
Android: Android 11, HIOS 8.0 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Camon 18 CH6 (MediaTek MT6768 Helio G90/G90T)
Flash Tool: SP Flash Tool
Latest Build: V947
Firmware Files: 19 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Camon 18 CH6 Firmware (Flash File) Drivers, Tools & Guide
The Tecno Camon 18 CH6 frequently arrives at the workshop with common issues like FRP locks, bootloops, or being stuck on the Tecno logo. This guide covers all those scenarios with the necessary firmware, tools, and precise steps I use daily.
Before starting, extract firmware to a simple folder path like C:FirmwareCH6. SP Flash Tool can struggle to locate the scatter file if paths contain spaces or special characters – a small step that saves frustrating troubleshooting time.
This page lists 19 firmware builds for the Tecno Camon 18 CH6, covering multiple Android versions and security patches. If one build fails, try another variant. The device uses MediaTek MT6768 Helio G90/G90T, requiring SP Flash Tool and VCOM/MTK drivers for flashing. Stock firmware ships with Android 11 and HIOS 8.0, determining default apps, security features, and interface after flashing.
We verified firmware authenticity across three independent sources to confirm these are unmodified stock ROMs. The Tecno Camon 18 CH6 launched in November 2021, and this page stays updated with the latest available firmware builds.
Your Tecno Camon 18 CH6 firmware comes as a compressed ZIP file. Download and extract using WinRAR or 7-Zip. After extraction, confirm the scatter file exists in the folder before proceeding.
A full flash deletes everything on the device: apps, accounts, photos, and settings. This intentional reset provides a clean slate, resolving issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.
Hard Reset Tecno Camon 18 CH6
To factory reset Tecno Camon 18 CH6 without a computer, power off the device completely, then hold Volume Up and Power simultaneously until the recovery menu appears. Use volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and returns Tecno Camon 18 CH6 to its original factory state. This resolves most software issues – slow performance, app crashes, forgotten screen locks, and bootloops. If problems persist after a factory reset, a full firmware flash using SP Flash Tool follows in later sections.
Tecno Camon 18 CH6 FRP Bypass
The fastest FRP bypass method for Tecno Camon 18 CH6 uses a free Android apps launcher that grants access to settings during setup. After flashing or resetting, you may encounter a Google account lock (FRP). Our free Android apps launcher provides the quickest solution. I always recommend removing Google accounts before flashing to avoid this issue entirely.
What Tecno Camon 18 CH6 Firmware Fixes
With MediaTek chipsets, SP Flash Tool is the standard firmware recovery method for Tecno Camon 18 CH6 devices. Stock firmware flashing addresses these issues:
- Recover devices stuck in recovery mode only.
- Fix startup loops, lagging, and freezing issues.
- Resolve touchscreen responsiveness caused by corrupted system builds.
- Restore original Tecno stock ROM to maintain warranty validity.
- Clear forgotten screen locks, PIN, or pattern without original credentials.
- Repair phones shutting down randomly or restarting in loops.
- Resolve “Download DA FAIL” errors and Secure Boot authentication problems specific to MediaTek MT6768 chipsets.
Learn more about stock ROMs and why flashing works.
How to Pick the Correct Tecno Camon 18 CH6 Firmware
>The most frequent flashing mistake is using firmware for a different variant. Before downloading, verify your exact device identity:
- Find Your Model Code: Go to Settings > About Phone. The code must be “CH6”. If different, do not use this firmware.
- Cross-Check the Chipset: Camon 18 CH6 uses MediaTek MT6768 Helio G90/G90T. Recovery mode should confirm this. If different, stop and find correct firmware.
- Note Your Current Build: Write down the build number in About Phone. This helps compare versions and decide between upgrades or reflashing.
- Boot Into Recovery: Recovery mode (Volume Up + Power while off) safely verifies model info before committing to a flash.
- Check Download Size: Verify file size matches the table. Corrupt or partial downloads commonly cause flash failures.
Firmware Details for Tecno Camon 18 CH6
Here is an overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Camon 18 CH6 |
| Firmware Version | V220, V388, V475, V514, V519, V576, V623, V433, V381, V947, V356, V406 |
| File Size | 3.85 GB to 4.12 GB |
| Android Version | Android 11, HIOS 8.0 |
| Platform | MediaTek MT6768 Helio G90/G90T |
| Release Date | Released 2021, November 23 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the most common question in comments, so here is a simple guide. Match your situation to the table below:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V947, download this one. It is the latest Tecno Camon 18 CH6 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V623, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V947 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V947 failed with a flash error | Try V623 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V947, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Camon 18 CH6 Firmware
Download the official stock firmware for your Tecno Camon 18 CH6 below. The latest available version is V947. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Camon_18_CH6_MT6768_V220_220917.zip Size: 3.9 GB | Download Link | Download Link2 |
| File Name: Tecno_Camon_18_CH6_MT6768_V388_211108.zip Size: 4 GB | Download Link | Download Link2 |
| File Name: Tecno_Camon_18_CH6_MT6768_V475_211217.zip Size: 4.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Camon_18_CH6_MT6768_V514_220329.zip Size: 4.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Camon_18_CH6_MT6768_V519_220416.zip Size: 4.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Camon_18_CH6_MT6768_V576_221020.zip Size: 3.9 GB | Download Link | Download Link2 |
| File Name: CH6-H6912D-S-OP-230410V623.zip Size: 3.9 GB | Download Link | Download Link2 |
| File Name: CH6-H6912D-S-OP-230206V514.zip Size: 3.95 GB | Download Link | Download Link2 |
| File Name: CH6-H6912D-S-OP-221221V433.zip Size: 3.95 GB | Download Link | Download Link2 |
| File Name: CH6-H6912D-S-OP-221125V381.zip Size: 3.96 GB | Download Link | Download Link2 |
| File Name: CH6-H6912D-R-OP-221020V576.zip Size: 3.93 GB | Download Link | Download Link2 |
| File Name: CH6-H6912D-S-OP-220917V220.zip Size: 3.92 GB | Download Link | Download Link2 |
| File Name: CH6-H6912D-R-OP-220416V519.zip Size: 4.11 GB | Download Link | Download Link2 |
| File Name: CH6-H6912D-R-OP-211217V475.zip Size: 4.12 GB | Download Link | Download Link2 |
| File Name: CH6-H6912D-R-OP-211108V388.zip Size: 4.07 GB | Download Link | Download Link2 |
| File Name: CH6-H6912D-R-OP-220416V519.zip Size: 4.1 GB | Download Link | Download Link2 |
| File Name: TECNO-CAMON-18-CH6-H6912D-S-OP-231009V947-Flash-File.zip Size: 3.85 GB | Download Link | Download Link2 |
| File Name: Tecno_Camon_18_(CH6-H6912D-R-OP-220329V356).zip Size: 4.1 GB | Download Link | Download Link2 |
| File Name: Tecno_Camon_18_(CH6-H6912D-R-OP-221020V406).zip Size: 3.9 GB | Download Link | Download Link2 |
Only download firmware fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Camon 18 CH6 (CH6) should not be confused with other Camon 18 variants that may have different chipsets or regional firmware. Even devices in the same Camon 18 line can use completely different processors. Always verify your exact model code “CH6” in Settings > About Phone before downloading any firmware from this page.
- Go to Settings and verify your model is exactly CH6. Phones with similar names can have completely different hardware.
- The chipset in your device should be MediaTek MT6768 Helio G90/G90T. If it is different, this firmware will not work.
- Always download directly from the table on this page to ensure you have the correct build.
- Check the file size after downloading, a mismatch with the listed size means a partial or corrupt download.
Before You Start: Tecno Camon 18 CH6 Requirements
Do not skip this section. Most failed Tecno flashes result from rushing through preparation steps. The VCOM driver installation is essential for the Tecno Camon 18 CH6 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
- Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
- Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
- Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
- Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
- Set Up Drivers:
How to Install Firmware on Tecno Camon 18 CH6
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Prepare the Flash Files:
- Go to the download section and grab the firmware package that matches your device.
- Unzip the file to a folder on your desktop. Avoid using folder names with non-English characters or spaces, the flash tool may not read them correctly.
- Confirm Driver Setup:
- The drivers listed in prerequisites need to be installed and working before you connect the phone. If you are not sure, reinstall them and restart your computer.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Click “Download” to kick off the firmware write.
- Hands off the phone and cable until the tool shows completion. Moving or disconnecting the device mid-flash is the most common cause of a bricked phone.
- Wait and Reboot:
- When you see the success message, disconnect the USB cable.
- Hold the power button to boot the phone. Give it a solid 5 to 8 minutes for the first startup, this is normal.
Normal Behavior After Installing Tecno Camon 18 CH6 Firmware
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
Tecno Camon 18 CH6 Flashing Problems and Fixes
- Tecno Camon 18 CH6 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the CH6, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
Missing IMEI or Corrupt Baseband on Tecno Camon 18 CH6 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Tecno Camon 18 CH6 Flashing FAQ
Q1: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q2: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q3: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.
Q4: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q5: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Camon 18 CH6 running on the MediaTek MT6768 Helio G90/G90T chipset. Even variants of the Camon 18 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q6: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q7: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q8: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
People Also Ask About Tecno Camon 18 CH6
Can flashing firmware fix a bricked Tecno Camon 18 CH6?
Yes. If your Tecno Camon 18 CH6 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
What is the latest firmware version for Tecno Camon 18 CH6?
The latest available Tecno Camon 18 CH6 firmware on this page is version V947. This page has 19 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
What chipset does the Tecno Camon 18 CH6 use?
The Tecno Camon 18 CH6 uses the MediaTek MT6768 Helio G90/G90T chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
How do I check my Tecno Camon 18 CH6 model number before flashing?
Go to Settings > About Phone on your Tecno Camon 18 CH6 and look for the model number “CH6”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Tecno Camon 18 CH6 Firmware, Final Notes
Your Tecno Camon 18 CH6 should now be running V947 on a clean build. If the first boot takes a while, do not worry, that is completely normal after a fresh flash.
Ran into something unexpected? Leave a comment and describe what happened. Include which step you were on and what error you saw. I will get back to you.
Consider sharing this guide with anyone else who has a Tecno device that needs fixing.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
