Samsung Galaxy Tab 3 7.0 SM-T217T Firmware

Last Updated: July 4, 2026

Getting your Samsung Galaxy Tab 3 7.0 SM-T217T back to a working state requires the correct files and a clear process. This guide provides the official firmware and the steps to restore the device to its original condition.

---

Samsung Galaxy Tab 3 7.0 SM-T217T Firmware (Flash File) Drivers, Tools & Guide

The official stock firmware for the Samsung Galaxy Tab 3 7.0 SM-T217T is available here. Flashing with Odin is a standard process that restores the system to its factory condition. I have compiled the necessary files and instructions on this page to help you fix software issues.

One important step before you start is to sign out of your Samsung account on the device. If you skip this, the Knox security system will trigger, which can cause additional issues later. Samsung firmware comes as a ZIP file that contains multiple sections: AP, BL, CP, and CSC. You must extract these files and load them into Odin correctly. If you do not see these specific files after extraction, you likely have the wrong package.

This device uses a Qualcomm Snapdragon 400 MSM8930AB processor, so you need the Qualcomm HS-USB drivers installed on your computer. The stock firmware runs Android 4.4.2 (KitKat) with the TouchWiz UX interface. This is the single firmware build currently available for the Samsung Galaxy Tab 3 7.0 SM-T217T. You can use this file to unbrick the device, recover from a bootloop, or reset the FRP lock.

Samsung firmware uses a multi-file system that differs from single-file scatter tools. The Samsung Galaxy Tab 3 7.0 SM-T217T was released in 2013. This page is updated with the latest available firmware builds as they become available.

Your Samsung Galaxy Tab 3 7.0 SM-T217T firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.

Be aware that flashing overwrites the entire software partition. Your data, apps, and accounts will all be removed. This full wipe is how the flash resolves deep software issues, anything from FRP locks and boot failures to Wi-Fi problems and app crashes.

---

Hard Reset Samsung Galaxy Tab 3 7.0 SM-T217T

A hard reset wipes the device and restores factory settings. To perform this reset without a computer, power off the device completely, then hold Volume Up + Power (or Volume Up + Home + Power on older models) until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores the Samsung Galaxy Tab 3 7.0 SM-T217T to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.

---

FRP Removal for Samsung Galaxy Tab 3 7.0 SM-T217T

The fastest method to bypass FRP is by using a free app launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the quickest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.

---

Why Flash Stock ROM on Samsung Galaxy Tab 3 7.0 SM-T217T?

Flashing the stock ROM fixes software issues, unbricks the device, and restores factory settings. Samsung devices like the Samsung Galaxy Tab 3 7.0 SM-T217T are flashed using Odin, regardless of the chipset inside:

• Recover your device when it only boots into recovery mode.
• Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
• Restore the original Samsung stock ROM to keep your warranty valid.
• Update to the latest Android version supported by your phone.
• Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
• Fix startup loops, lagging, and freezing on your device.
• Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.

Learn more about stock ROMs and why flashing works.

---

How to Pick the Correct Samsung Galaxy Tab 3 7.0 SM-T217T Firmware

You must verify the exact model number and region before downloading to ensure compatibility. The single biggest mistake is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:

1. Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. SM-T217T). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
2. Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
3. Check the Binary Level: Look at the version string in your current firmware (e.g. XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware.
4. Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
5. Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.

---

Firmware Details for Samsung Galaxy Tab 3 7.0 SM-T217T

The official firmware specifications for the Samsung Galaxy Tab 3 7.0 SM-T217T are listed below:

Firmware Information	Details
Device Model	Samsung Galaxy Tab 3 7.0 SM-T217T
Firmware Version	V4
File Size	1.1 GB
Android Version	Android 4.4.2 (KitKat), TouchWiz UX UI
Platform	Qualcomm Snapdragon 400 MSM8930AB
Release Date	Released 2013, July
Region	Global, Africa and Asia
File Type	.tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)

---

Which Firmware Version Should I Download?

Use the guide below to select the correct file for your specific problem. This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	the latest version, download this one. It is the latest Samsung Galaxy Tab 3 7.0 SM-T217T firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Not sure which region/CSC to download	Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename.
Phone slow after a recent OTA update	Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has.
IMEI missing after a previous flash	Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash.
the latest version failed with a flash error	Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem.
Restoring to factory / warranty repair	the latest version, clean state, fresh start.

To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.

---

Download Samsung Galaxy Tab 3 7.0 SM-T217T Firmware

Download the official stock firmware for your Samsung Galaxy Tab 3 7.0 SM-T217T below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: Samsung_SM-T217T_(T217TUVSBQA1_T217TTMBBQA1_ATT_v4.4.4)_by.zip Size: 1.1 GB	Download Link	Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Samsung Galaxy Tab 3 7.0 SM-T217T (SM-T217T) should not be confused with other Galaxy Tab 3 7.0 variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Tab 3 7.0 line can use completely different processors. Always verify your exact model code “SM-T217T” in Settings > About Phone before downloading any firmware from this page.

---

Prerequisites for Samsung Galaxy Tab 3 7.0 SM-T217T Firmware

You need a Windows PC, a working USB cable, and the correct drivers installed. Go through this list before you open Odin for the Samsung Galaxy Tab 3 7.0 SM-T217T. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.

1. Save Your IMEI Numbers: Type *#06# in the phone dialer and note down both numbers. These are your device identifiers for the cellular network. If flashing wipes them, you will need the originals to write them back.
2. Disconnect Google Accounts: Before you start anything, remove all Google accounts from the phone. Settings then Accounts then tap each Google account and remove it. This avoids the FRP verification screen that appears after flashing if accounts were still linked.
3. Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
4. Create a Backup: Copy your data to your computer or an SD card. Flashing replaces the entire software on the phone, which means all personal data, apps, and settings will be permanently deleted.
5. Charge First: Get the battery above 50% before starting. The flashing process takes a few minutes and the first boot takes several more. A power failure during either stage can leave the device in a state that requires more advanced recovery.
6. Prepare Your PC Connection: You need a Windows computer and a USB cable that supports data transfer. Test the cable first by connecting the phone normally, if it shows up in File Explorer, the cable is good.
7. Install the Right Drivers:
   • Samsung USB Drivers

---

How to Install Firmware on Samsung Galaxy Tab 3 7.0 SM-T217T

We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.

1. Get the Firmware Ready:
   • Download the firmware file from the download section above.
   • Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like C:firmware.
2. Verify Your Drivers:
   • Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
3. Load the Firmware File:
   • In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
4. Connect Your Device:
   • Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
   • Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
5. Start Flashing:
   • Hit the “Start” button in the flash tool to start the process.
   • Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
6. Wait and Reboot:
   • When the flash completes, unplug the USB cable from your phone.
   • Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.

Video Guide for Flashing

---

Normal Behavior After Installing Samsung Galaxy Tab 3 7.0 SM-T217T Firmware

The device will boot into the setup wizard and perform a factory reset. Here is what is completely normal after a successful flash:

• How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
• Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
• Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
• Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
• Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
• The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
• Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.

---

Common Issues When Flashing Samsung Galaxy Tab 3 7.0 SM-T217T

1. Odin Shows “FAIL” Instead of “PASS”:
   • This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
2. Samsung Galaxy Tab 3 7.0 SM-T217T Not Recognized by Odin:
   • Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
3. KG Lock / Knox Triggered After Flashing:
   • This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
4. Boot Loop After Flashing:
   • Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.

---

Missing IMEI or Corrupt Baseband on Samsung Galaxy Tab 3 7.0 SM-T217T After Flashing?

A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.

Video Guide: How to repair IMEI

---

Normal Behavior After Installing Samsung Galaxy Tab 3 7.0 SM-T217T Firmware

The device will boot into the setup wizard and perform a factory reset. Here is what is completely normal after a successful flash:

• How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
• Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
• Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
• Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
• Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
• The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
• Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.

---

Common Issues When Flashing Samsung Galaxy Tab 3 7.0 SM-T217T

1. Odin Shows “FAIL” Instead of “PASS”:
   • This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
2. Samsung Galaxy Tab 3 7.0 SM-T217T Not Recognized by Odin:
   • Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
3. KG Lock / Knox Triggered After Flashing:
   • This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
4. Boot Loop After Flashing:
   • Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.

---

Missing IMEI or Corrupt Baseband on Samsung Galaxy Tab 3 7.0 SM-T217T After Flashing?

A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.

Video Guide: How to repair IMEI

---

Samsung Galaxy Tab 3 7.0 SM-T217T Flashing FAQ

Q1: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Samsung support if you are concerned.

Q2: Can I use a Mac or Linux computer for this?
A: Samsung firmware can be flashed using Heimdall on Linux or Mac, but the instructions on this page are written for Odin on Windows. If you only have a Mac, you may want to use a Windows virtual machine or Boot Camp for the most straightforward experience.

Q3: Will flashing erase my data?
A: Yes, flashing with Odin restores the device to factory state, including Android 4.4.2 (KitKat), TouchWiz UX UI default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.

Q4: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. Samsung devices can usually enter Download Mode even when the screen is completely dead, hold Volume Down + Power for 10 seconds. If the battery is completely drained, charge it for at least 15 minutes first.

Q5: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy Tab 3 7.0 SM-T217T running on the Qualcomm Snapdragon 400 MSM8930AB chipset. Even variants of the Galaxy Tab 3 7.0 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.

Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.

Q7: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.

Q8: Can I go back to an older firmware version?
A: It is technically possible on some Qualcomm builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.

People Also Ask About Samsung Galaxy Tab 3 7.0 SM-T217T

Can flashing firmware fix a bricked Samsung Galaxy Tab 3 7.0 SM-T217T?
Yes. If your Samsung Galaxy Tab 3 7.0 SM-T217T is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.

Will flashing firmware on Samsung Galaxy Tab 3 7.0 SM-T217T erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Tab 3 7.0 SM-T217T with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.

How do I check my Samsung Galaxy Tab 3 7.0 SM-T217T model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Tab 3 7.0 SM-T217T and look for the model number “SM-T217T”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

What is the latest firmware version for Samsung Galaxy Tab 3 7.0 SM-T217T?
The latest available Samsung Galaxy Tab 3 7.0 SM-T217T firmware on this page is version the latest version. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.

---

Wrapping Up: Samsung Galaxy Tab 3 7.0 SM-T217T Firmware

You have successfully restored the Samsung Galaxy Tab 3 7.0 SM-T217T to factory condition. The device should now be back at the setup wizard on a fresh the latest version build.

Questions, errors, or something not covered here? The comments section is open. Tell me exactly what happened and I will walk you through the fix.

If you found this useful, a quick share goes a long way, someone else with the same device is probably searching for this right now.

Browse all Samsung firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.