Samsung Galaxy Tab 3 7.0 SM-T211 Firmware

Last Updated: July 6, 2026

Restoring a Samsung Galaxy Tab 3 7.0 SM-T211 to a working state requires the correct files and a clear process. This guide provides the official Samsung Galaxy Tab 3 7.0 SM-T211 firmware and the steps to restore the device to its original condition.

---

Samsung Galaxy Tab 3 7.0 SM-T211 Firmware (Flash File) Drivers, Tools & Guide

Flashing Samsung firmware with Odin is straightforward once you know what to look for. I have compiled everything on this page: the correct Samsung Galaxy Tab 3 7.0 SM-T211 firmware file, the proper Odin version, and the steps that work.

Before you begin, you need to know a few things. If your device has a Samsung account signed in, you must sign it out before doing anything else. Knox will trigger if this step is skipped, and dealing with a KG lock after flashing takes extra time. Also, Samsung firmware comes in .tar.md5 format, after extracting the ZIP, you should see files named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If you do not see these, you have the wrong package.

There are 2 firmware files available for the Samsung Galaxy Tab 3 7.0 SM-T211 on this page. Pick the one that matches your current Android version for the smoothest flash. The stock firmware ships with Android 4.4.2 KitKat, TouchWiz UX UI, which determines the default apps, security features, and interface you will see after flashing. The Samsung Galaxy Tab 3 7.0 SM-T211 was originally released in 2013, which means USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play.

Samsung firmware uses a multi-file system (AP, BL, CP, CSC) specific to Odin-based flashing, which differs from single-file scatter-based tools. The Samsung Galaxy Tab 3 7.0 SM-T211 was released in 2013. This page is maintained with the latest available firmware builds as they become available.

Your Samsung Galaxy Tab 3 7.0 SM-T211 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.

Be aware that flashing overwrites the entire software partition. Your data, apps, and accounts will all be removed. This full wipe is how the flash resolves deep software issues, anything from FRP locks and boot failures to Wi-Fi problems and app crashes.

---

Reset Samsung Galaxy Tab 3 7.0 SM-T211 From Recovery Mode

To factory reset Samsung Galaxy Tab 3 7.0 SM-T211 without a computer, power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores Samsung Galaxy Tab 3 7.0 SM-T211 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.

---

Bypass Google Lock on Samsung Galaxy Tab 3 7.0 SM-T211

The fastest way to bypass FRP on Samsung Galaxy Tab 3 7.0 SM-T211 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why it is best to remove your Google account before flashing, it avoids this problem entirely.

---

Common Reasons to Reinstall Samsung Galaxy Tab 3 7.0 SM-T211 Firmware

Samsung devices like the Samsung Galaxy Tab 3 7.0 SM-T211 are flashed using Odin, regardless of the chipset inside. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:

• Recover your device when it only boots into recovery mode.
• Repair a phone that shuts down randomly or restarts in a loop.
• Restore system apps that were accidentally removed or corrupted.
• Resolve OTA update failures and battery drain issues.
• Remove persistent malware or adware that survives a factory reset.
• Resolve touchscreen responsiveness issues caused by a corrupted system build.
• Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.

Learn more about stock ROMs and why flashing works.

---

How to Pick the Correct Samsung Galaxy Tab 3 7.0 SM-T211 Firmware

The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:

1. Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. SM-T211). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
2. Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
3. Check the Binary Level: Look at the version string in your current firmware (e.g. XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware.
4. Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
5. Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.

---

Firmware Details for Samsung Galaxy Tab 3 7.0 SM-T211

Here is a quick overview of the official firmware specifications:

Firmware Information	Details
Device Model	Samsung Galaxy Tab 3 7.0 SM-T211
Firmware Version	V4
File Size	917.4 MB
Android Version	Android 4.4.2 KitKat, TouchWiz UX UI
Platform	Marvell PXA986 (Dual-core 1.2 GHz Cortex-A9)
Release Date	Released 2013, July
Region	SM
File Type	.tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)

---

Which Firmware Version Should I Download?

This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	the latest version, download this one. It is the latest Samsung Galaxy Tab 3 7.0 SM-T211 firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Not sure which region/CSC to download	Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename.
Phone slow after a recent OTA update	Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has.
IMEI missing after a previous flash	Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash.
the latest version failed with a flash error	Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem.
Restoring to factory / warranty repair	the latest version, clean state, fresh start.

To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.

---

Download Samsung Galaxy Tab 3 7.0 SM-T211 Firmware

Download the official stock firmware for your Samsung Galaxy Tab 3 7.0 SM-T211 below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: SM-T211_4.4.2_T211UBUBNK2_T211ZTOBNK2_T211UBUBNK2.zip Size: 920.9 MB	Download Link	Download Link2

File Name: Samsung_SM-T211_(T211XXBPA2_T211OJVBPA2_Saudi_Arabia_v4.4.2)_by.zip Size: 917.4 MB

Download Link

Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Samsung Galaxy Tab 3 7.0 SM-T211 (SM-T211) should not be confused with other Galaxy Tab 3 7.0 variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Tab 3 7.0 line can use completely different processors. Always verify your exact model code “SM-T211” in Settings > About Phone before downloading any firmware from this page.

---

Prepare Your Samsung Galaxy Tab 3 7.0 SM-T211 for Flashing

Go through this list before you open Odin for the Samsung Galaxy Tab 3 7.0 SM-T211. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.

1. IMEI Backup: Open the dialer and enter *#06#. Write both IMEI numbers down on paper or take a screenshot. If you ever need to repair your IMEI after flashing, these are essential.
2. Remove All Google Accounts: Go to Settings, Accounts, and sign out of every Google account on the device. Leaving accounts signed in triggers FRP lock after a flash, which blocks you from setting up the phone.
3. Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
4. Backup Everything: Photos, contacts, messages, WhatsApp data, move it all to a computer or cloud service. The flash will restore the phone to factory state with nothing on it.
5. 50% Battery Minimum: Do not start with a low battery. If power cuts out during the flash, the device can become unresponsive and much harder to fix.
6. USB Cable and Computer: Use a proper data-transfer USB cable and a Windows PC. Avoid USB hubs, connect directly to the motherboard port for a stable connection.
7. Download and Install Drivers:
   • Samsung USB Drivers

---

Samsung Galaxy Tab 3 7.0 SM-T211 Firmware Installation Guide

We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.

1. Download the Firmware Package:
   • Use the download links in the table above to get the correct firmware file for your device.
   • Extract the archive with WinRAR or 7-Zip. Use a short folder path like D:flash to avoid issues with some tools.
2. Check Drivers:
   • All drivers from the prerequisites must be installed before connecting your device. Restart your computer after installing them.
3. Load the Firmware File:
   • In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
4. Connect Your Device:
   • Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
   • Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
5. Start Flashing:
   • Press “Start” to begin writing the firmware to your device.
   • Do not unplug the phone, close the flash tool, or interact with the device until the process is 100% complete.
6. Wait and Reboot:
   • After the tool confirms the flash is complete, safely disconnect your phone.
   • Press the power button to start your device. The initial boot is slow, wait up to 8 minutes before assuming there is a problem.

Video Guide for Flashing

---

What Is Normal After a Samsung Galaxy Tab 3 7.0 SM-T211 Flash?

Here is what is completely normal after a successful flash:

• How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
• Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
• Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
• First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
• Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
• Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
• Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.

---

Fix Common Samsung Galaxy Tab 3 7.0 SM-T211 Firmware Errors

1. Odin Shows “FAIL” Instead of “PASS”:
   • This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
2. Samsung Galaxy Tab 3 7.0 SM-T211 Not Recognized by Odin:
   • Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
3. KG Lock / Knox Triggered After Flashing:
   • This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
4. Boot Loop After Flashing:
   • Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.

---

Missing IMEI or Corrupt Baseband on Samsung Galaxy Tab 3 7.0 SM-T211 After Flashing?

A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.

Video Guide: How to repair IMEI

---

Questions About Samsung Galaxy Tab 3 7.0 SM-T211 Firmware

Q1: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.

Q2: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.

Q3: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.

Q4: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.

Q5: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close Odin, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.

Q6: Can I use a Mac or Linux computer for this?
A: Samsung firmware can be flashed using Heimdall on Linux or Mac, but the instructions on this page are written for Odin on Windows. If you only have a Mac, you may want to use a Windows virtual machine or Boot Camp for the most straightforward experience.

Q7: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.

Q8: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.

People Also Ask About Samsung Galaxy Tab 3 7.0 SM-T211

What is the latest firmware version for Samsung Galaxy Tab 3 7.0 SM-T211?
The latest available Samsung Galaxy Tab 3 7.0 SM-T211 firmware on this page is version the latest version. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.

Will flashing firmware on Samsung Galaxy Tab 3 7.0 SM-T211 erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Tab 3 7.0 SM-T211 with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.

How do I check my Samsung Galaxy Tab 3 7.0 SM-T211 model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Tab 3 7.0 SM-T211 and look for the model number “SM-T211”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

Can flashing firmware fix a bricked Samsung Galaxy Tab 3 7.0 SM-T211?
Yes. If your Samsung Galaxy Tab 3 7.0 SM-T211 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.

---

Wrapping Up: Samsung Galaxy Tab 3 7.0 SM-T211 Firmware

You have just completed a clean firmware flash on your Samsung Galaxy Tab 3 7.0 SM-T211. The device should now be back at the setup wizard on a fresh the latest version build.

Questions, errors, or something not covered here? The comments section is open. Tell me exactly what happened and I will walk you through the fix.

If you found this useful, a quick share goes a long way, someone else with the same device is probably searching for this right now.

Browse all Samsung firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.