Last Updated: June 26, 2026
If your Samsung Galaxy Note II N7100 SGH-I317M is stuck on a logo, locked out, or not responding, this guide walks you through the full recovery process with official firmware, the right flash tool, and clear instructions.
Device: Samsung Galaxy Note II N7100 SGH-I317M | Chipset: Samsung Exynos 4412 Quad | Flash Tool: Odin
Android: Android 4.1.1 (Jelly Bean), upgradable to 4.4.2 (KitKat), TouchWiz UI | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy Note II N7100 SGH-I317M (Samsung Exynos 4412 Quad)
Flash Tool: Odin
Latest Build: the latest version
Firmware Files: 2 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung Galaxy Note II N7100 SGH-I317M Firmware (Flash File) Drivers, Tools & Guide
Flashing Samsung firmware with Odin is a straightforward process if you follow the correct steps. This page provides the official Samsung Galaxy Note II N7100 SGH-I317M firmware you need, the correct Odin version, and clear instructions to get your phone working again.
Before you begin, check your Samsung account. If you are still signed in, sign out before starting the process. This prevents a Knox lock from triggering after flashing, which would require extra steps to fix. Also, Samsung firmware comes in .tar.md5 format. After extracting the ZIP file, you should see files named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If you do not see these files, you have the wrong package for your device.
There are two firmware files available for the Samsung Galaxy Note II N7100 SGH-I317M on this page. Choose the file that matches your current Android version for the best result. The Samsung Galaxy Note II N7100 SGH-I317M was released in 2012, which means USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play. The stock firmware ships with Android 4.1.1 (Jelly Bean), upgradable to 4.4.2 (KitKat), TouchWiz UI, which determines the default apps, security features, and interface you will see after flashing.
The Samsung Galaxy Note II N7100 SGH-I317M was released in 2012. This page is maintained with the latest available firmware builds as they become available. We verified firmware file integrity across two independent sources to confirm these are authentic, unmodified stock ROMs.
Your Samsung Galaxy Note II N7100 SGH-I317M firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.
This process restores the phone to its original factory state, which means all your personal data will be lost. That clean wipe is exactly what fixes persistent problems like bootloops, forgotten locks, Google account verification, battery drain, and system errors.
Factory Reset Samsung Galaxy Note II N7100 SGH-I317M Without a PC
To factory reset the Samsung Galaxy Note II N7100 SGH-I317M without a computer, power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores the Samsung Galaxy Note II N7100 SGH-I317M to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
Remove FRP Lock on Samsung Galaxy Note II N7100 SGH-I317M
The fastest way to bypass FRP on the Samsung Galaxy Note II N7100 SGH-I317M is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why it is recommended to remove your Google account before flashing, it avoids this problem entirely.
Why Flash Stock ROM on Samsung Galaxy Note II N7100 SGH-I317M?
Samsung devices like the Samsung Galaxy Note II N7100 SGH-I317M are flashed using Odin, regardless of the chipset inside. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Fix startup loops, lagging, and freezing on your device.
- Restore the original Samsung stock ROM to keep your warranty valid.
- Remove persistent malware or adware that survives a factory reset.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Which Firmware Version Does Your Samsung Galaxy Note II N7100 SGH-I317M Need?
The most frequent issue I encounter is users flashing firmware for a different variant. Before downloading anything, verify your exact device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. SGH-I317M). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Firmware Details for Samsung Galaxy Note II N7100 SGH-I317M
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Note II N7100 SGH-I317M |
| Firmware Version | N/A |
| File Size | 1.1 GB to 1.12 GB |
| Android Version | Android 4.1.1 (Jelly Bean), upgradable to 4.4.2 (KitKat), TouchWiz UI |
| Platform | Samsung Exynos 4412 Quad |
| Release Date | Released 2012, September |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung Galaxy Note II N7100 SGH-I317M firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Note II N7100 SGH-I317M Firmware
Download the official stock firmware for your Samsung Galaxy Note II N7100 SGH-I317M below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: I317MVLUDNF4_I317MOYADNF4_RWC.zip Size: 1.1 GB | Download Link | Download Link2 |
| File Name: I317MVLUDNH3_I317MOYADNH3_TLS.zip Size: 1.12 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy Note II N7100 SGH-I317M (SGH-I317M) should not be confused with other Galaxy Note II N7100 variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Note II N7100 line can use completely different processors. Always verify your exact model code “SGH-I317M” in Settings > About Phone before downloading any firmware from this page.
- The model code on your phone must match SGH-I317M exactly. Even a single letter variant (like adding or dropping an “i” or “s”) can mean a different chipset inside.
- Your chipset should be Samsung Exynos 4412 Quad. Recovery mode shows this information if you are not sure.
- Do not mix firmware from other download sites with the files on this page.
- If the downloaded file is much smaller than what is listed in the table above, re-download it, partial files will fail.
Samsung Galaxy Note II N7100 SGH-I317M Flash Setup Checklist
Go through this list before you open Odin for the Samsung Galaxy Note II N7100 SGH-I317M. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Samsung Galaxy Note II N7100 SGH-I317M Firmware Installation Guide
We use Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters, as some flash tools have trouble with them.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and that your PC has been restarted since installation. Skipping the restart is a common reason drivers do not work correctly.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Click the “Start” button to begin.
- Do not disconnect, move the cable, or touch the device until the process is fully complete. Disconnecting mid-flash is how devices get bricked.
- Wait and Reboot:
- Once flashing finishes successfully, disconnect the device.
- Power on your device. The first boot will take longer than usual, give it up to 8 minutes.
Video Guide for Flashing
Post-Flash Behavior on Samsung Galaxy Note II N7100 SGH-I317M
Here is what is completely normal after a successful flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
What to Do if Samsung Galaxy Note II N7100 SGH-I317M Flash Fails
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy Note II N7100 SGH-I317M Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Note II N7100 SGH-I317M After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Frequently Asked Questions
Q1: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q2: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q3: Can I use a Mac or Linux computer for this?
A: Samsung firmware can be flashed using Heimdall on Linux or Mac, but the instructions on this page are written for Odin on Windows. If you only have a Mac, you may want to use a Windows virtual machine or Boot Camp for the most straightforward experience.
Q4: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.
Q5: Can I go back to an older firmware version?
A: It is technically possible on some Exynos builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q6: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
Q7: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q8: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy Note II N7100 SGH-I317M running on the Samsung Exynos 4412 Quad chipset. Even variants of the Galaxy Note II N7100 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
People Also Ask About Samsung Galaxy Note II N7100 SGH-I317M
What is the latest firmware version for Samsung Galaxy Note II N7100 SGH-I317M?
The latest available Samsung Galaxy Note II N7100 SGH-I317M firmware on this page is version the latest version. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung Galaxy Note II N7100 SGH-I317M erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Note II N7100 SGH-I317M with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Samsung Galaxy Note II N7100 SGH-I317M model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Note II N7100 SGH-I317M and look for the model number “SGH-I317M”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Samsung Galaxy Note II N7100 SGH-I317M?
Yes. If your Samsung Galaxy Note II N7100 SGH-I317M is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
Final Thoughts
That covers the entire flashing process for the Samsung Galaxy Note II N7100 SGH-I317M. With the latest version installed, your device should boot cleanly and be ready for setup.
If you ran into an issue that is not covered here, or if one of the steps did not work the way it should, let me know in the comments. Include the error code or screenshot if you have one.
Bookmark this page if you work on Samsung devices regularly. I keep it updated when new firmware versions come out.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
