Last Updated: July 14, 2026
Flashing firmware on the Samsung Galaxy Core Prime SM-G360H is necessary when the device is stuck, frozen, or not responding. This guide provides the official files and steps to restore it.
Device: Samsung Galaxy Core Prime SM-G360H | Chipset: Spreadtrum SC8830 | Flash Tool: Odin
Android: Android 4.4.2 KitKat | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy Core Prime SM-G360H (Spreadtrum SC8830)
Flash Tool: Odin
Latest Build: the latest version
Firmware Files: 3 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung Galaxy Core Prime SM-G360H Firmware (Flash File) Drivers, Tools & Guide
Flashing Samsung firmware with Odin is simple if you have the correct files. This page provides the Samsung Galaxy Core Prime SM-G360H firmware, the right Odin version, and the steps to follow.
Before starting, sign out of your Samsung account. If you skip this, a Knox lock will trigger, which adds extra steps to the process. Also, ensure you have extracted the ZIP to find the AP, BL, CP, and CSC files.
The Samsung Galaxy Core Prime SM-G360H runs on Android 4.4.2 and uses a Spreadtrum SC8830 chipset. You will need SPD Flash Tool and drivers, not standard Samsung tools. The firmware comes in .tar.md5 format.
This page lists three firmware versions for the Samsung Galaxy Core Prime SM-G360H. Samsung firmware uses a multi-file system (AP, BL, CP, CSC) which is different from single-file tools.
Download the ZIP using 7-Zip or WinRAR. You should see files named AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5. If you do not see these, you have the wrong package.
Flashing restores the phone to its factory state, which wipes all data. This clean state fixes bootloops, forgotten locks, and system errors.
FRP Removal for Samsung Galaxy Core Prime SM-G360H
The easiest way to bypass FRP on Samsung Galaxy Core Prime SM-G360H is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher works well for this. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Reset Samsung Galaxy Core Prime SM-G360H From Recovery Mode
To factory reset Samsung Galaxy Core Prime SM-G360H without a computer, power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Samsung Galaxy Core Prime SM-G360H to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
Which Firmware Version Does Your Samsung Galaxy Core Prime SM-G360H Need?
The biggest error is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. SM-G360H). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Why Flash Stock ROM on Samsung Galaxy Core Prime SM-G360H?
Samsung devices like the Samsung Galaxy Core Prime SM-G360H are flashed using Odin, regardless of the chipset inside. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:
- Restore the original Samsung stock ROM to keep your warranty valid.
- Remove persistent malware or adware that survives a factory reset.
- Repair a phone that shuts down randomly or restarts in a loop.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Restore system apps that were accidentally removed or corrupted.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Samsung Galaxy Core Prime SM-G360H
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Core Prime SM-G360H |
| Firmware Version | V1 |
| File Size | 360.58 MB to 553.26 MB |
| Android Version | Android 4.4.2 KitKat |
| Platform | Spreadtrum SC8830 |
| Release Date | Released 2014, November |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung Galaxy Core Prime SM-G360H firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Core Prime SM-G360H Firmware
Download the official stock firmware for your Samsung Galaxy Core Prime SM-G360H below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Samsung_SM-G360H_MT6572_4.2.2.zip Size: 553.26 MB | Download Link | Download Link2 |
| File Name: Samsung_Galaxy_Core_Prime_SM-G360H_MT6572_4.4.2.zip Size: 360.58 MB | Download Link | Download Link2 |
| File Name: Samsung_Galaxy_Core_Prime_SM-G360H_MT6572_4.4.2_ALPS.KK1.MP7.V1 Size: N/A | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy Core Prime SM-G360H (SM-G360H) should not be confused with other Galaxy Core Prime variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Core Prime line can use completely different processors. Always verify your exact model code “SM-G360H” in Settings > About Phone before downloading any firmware from this page.
- Confirm your exact model is SM-G360H, check About Phone, not the marketing name on the box.
- Your device must have a Spreadtrum SC8830 chipset. Boot into recovery mode to verify if unsure.
- Only use files downloaded from this page. Third-party mirrors may serve modified or incomplete packages.
- Compare the file size against the download table. If it does not match, the download is likely corrupt or incomplete.
Samsung Galaxy Core Prime SM-G360H Flash Setup Checklist
Go through this list before you open Odin for the Samsung Galaxy Core Prime SM-G360H. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
- Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
- Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
- Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
- Set Up Drivers:
Step-by-Step: Flash Samsung Galaxy Core Prime SM-G360H Stock ROM
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Hit the “Start” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
Video Guide for Flashing
Samsung Galaxy Core Prime SM-G360H Flashing Problems and Fixes
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy Core Prime SM-G360H Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
After Flashing: What Happens Next on Samsung Galaxy Core Prime SM-G360H
Here is what is completely normal after a successful flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Core Prime SM-G360H After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Common Questions About Flashing Samsung Galaxy Core Prime SM-G360H
Q1: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Samsung support if you are concerned.
Q2: Will flashing erase my data?
A: Yes, flashing with Odin restores the device to factory state, including Android 4.4.2 KitKat default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q3: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q4: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. Samsung devices can usually enter Download Mode even when the screen is completely dead, hold Volume Down + Power for 10 seconds. If the battery is completely drained, charge it for at least 15 minutes first.
Q5: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q6: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q7: Can I use a Mac or Linux computer for this?
A: Samsung firmware can be flashed using Heimdall on Linux or Mac, but the instructions on this page are written for Odin on Windows. If you only have a Mac, you may want to use a Windows virtual machine or Boot Camp for the most straightforward experience.
Q8: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
People Also Ask About Samsung Galaxy Core Prime SM-G360H
What is the latest firmware version for Samsung Galaxy Core Prime SM-G360H?
The latest available Samsung Galaxy Core Prime SM-G360H firmware on this page is version the latest version. This page has 3 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung Galaxy Core Prime SM-G360H erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Core Prime SM-G360H with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Can flashing firmware fix a bricked Samsung Galaxy Core Prime SM-G360H?
Yes. If your Samsung Galaxy Core Prime SM-G360H is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
What chipset does the Samsung Galaxy Core Prime SM-G360H use?
The Samsung Galaxy Core Prime SM-G360H runs on the Spreadtrum SC8830, a Unisoc (Spreadtrum) processor. You will need SPD Flash Tool (also called SPD Research Tool) and SPD USB drivers to flash firmware on this device.
Wrapping Up: Samsung Galaxy Core Prime SM-G360H Firmware
Your Samsung Galaxy Core Prime SM-G360H should now be running the latest version on a clean build. If the first boot takes a while, do not worry, that is completely normal after a fresh flash.
Ran into something unexpected? Leave a comment and describe what happened. Include which step you were on and what error you saw. I will get back to you.
Consider sharing this guide with anyone else who has a Samsung device that needs fixing.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
