Last Updated: September 10, 2019
You can restore your Samsung I9010 Galaxy S Giorgio Armani GT-I9010 to working condition by flashing the official stock ROM using the Odin tool. This page contains the necessary firmware, drivers, and a step-by-step guide to handle hard resets, FRP bypass, and IMEI repair.
Device: Samsung I9010 Galaxy S Giorgio Armani GT-I9010 | Chipset: Samsung Exynos 3 (Hummingbird) with 1.0 GHz Cortex-A8 CPU and PowerVR SGX540 GPU | Flash Tool: Odin
Android: Android 2.2 (Froyo) with TouchWiz UI 3.0 | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung I9010 Galaxy S Giorgio Armani GT-I9010 (Samsung Exynos 3 (Hummingbird) with 1.0 GHz Cortex-A8 CPU and PowerVR SGX540 GPU)
Flash Tool: Odin
Latest Build: the latest version
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung I9010 Galaxy S Giorgio Armani GT-I9010 Firmware (Flash File) Drivers, Tools & Guide
You can restore your Samsung I9010 Galaxy S Giorgio Armani GT-I9010 to working condition by flashing the official stock ROM using the Odin tool. I have gathered all the files and instructions you need on this page to handle hard resets, FRP bypass, and IMEI repair.
Before you begin, you should sign out of any Samsung account on the device. If you skip this step, the Knox security flag will trigger, and you will face a KG lock that requires extra work to resolve. Samsung firmware comes in .tar.md5 format. After extracting the ZIP, you should look for files named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If you do not see these, you have the wrong package.
There is currently only one stock ROM available for the Samsung I9010 Galaxy S Giorgio Armani GT-I9010. This firmware includes Android 2.2 (Froyo) with TouchWiz UI 3.0, which sets the default apps and interface. Because the device is older, USB driver compatibility on newer Windows versions (10/11) might require manual installation rather than plug-and-play. Ensure you have the correct Samsung I9010 Galaxy S Giorgio Armani GT-I9010 firmware before starting.
Samsung firmware uses a multi-file system (AP, BL, CP, CSC) that is specific to Odin-based flashing, unlike single-file tools. The Samsung I9010 Galaxy S Giorgio Armani GT-I9010 was released in 2011. This page is updated with the latest firmware builds as they become available.
Your Samsung I9010 Galaxy S Giorgio Armani GT-I9010 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.
A full flash will erase everything on the device: apps, accounts, photos, and settings. This process clears the slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.
Hard Reset Samsung I9010 Galaxy S Giorgio Armani GT-I9010
You can perform a factory reset on the Samsung I9010 Galaxy S Giorgio Armani GT-I9010 without a computer by using the hardware keys. Power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Samsung I9010 Galaxy S Giorgio Armani GT-I9010 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
FRP Removal for Samsung I9010 Galaxy S Giorgio Armani GT-I9010
The best method to bypass the Google account lock on the Samsung I9010 Galaxy S Giorgio Armani GT-I9010 involves using a compatible apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
When Should You Flash Samsung I9010 Galaxy S Giorgio Armani GT-I9010?
You should flash the Samsung I9010 Galaxy S Giorgio Armani GT-I9010 firmware whenever the device software is unstable or corrupted. Samsung devices like the Samsung I9010 Galaxy S Giorgio Armani GT-I9010 are flashed using Odin, regardless of the chipset inside. This approach can resolve various software issues:
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Remove persistent malware or adware that survives a factory reset.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Restore the original Samsung stock ROM to keep your warranty valid.
- Restore system apps that were accidentally removed or corrupted.
- Repair a phone that shuts down randomly or restarts in a loop.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Which Firmware Version Does Your Samsung I9010 Galaxy S Giorgio Armani GT-I9010 Need?
You must verify the exact model number and region of your Samsung I9010 Galaxy S Giorgio Armani GT-I9010 before selecting a firmware file. The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, check your device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. GT-I9010). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Firmware Details for Samsung I9010 Galaxy S Giorgio Armani GT-I9010
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung I9010 Galaxy S Giorgio Armani GT-I9010 |
| Firmware Version | N/A |
| File Size | 176.8 MB |
| Android Version | Android 2.2 (Froyo) with TouchWiz UI 3.0 |
| Platform | Samsung Exynos 3 (Hummingbird) with 1.0 GHz Cortex-A8 CPU and PowerVR SGX540 GPU |
| Release Date | Released 2011, January |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
You should select the firmware version based on your specific situation, such as whether the phone is dead or just locked. This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung I9010 Galaxy S Giorgio Armani GT-I9010 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung I9010 Galaxy S Giorgio Armani GT-I9010 Firmware
Download the official stock firmware for your Samsung I9010 Galaxy S Giorgio Armani GT-I9010 below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: I9010XXKD1_I9010XXJK9_DBT.zip Size: 176.8 MB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung I9010 Galaxy S Giorgio Armani GT-I9010 (GT-I9010) should not be confused with other I9010 Galaxy S Giorgio Armani variants that may have different chipsets or regional firmware. Even devices in the same I9010 Galaxy S Giorgio Armani line can use completely different processors. Always verify your exact model code “GT-I9010” in Settings > About Phone before downloading any firmware from this page.
- The model code on your phone must match GT-I9010 exactly. Even a single letter variant (like adding or dropping an “i” or “s”) can mean a different chipset inside.
- Your chipset should be Samsung Exynos 3 (Hummingbird) with 1.0 GHz Cortex-A8 CPU and PowerVR SGX540 GPU. Recovery mode shows this information if you are not sure.
- Do not mix firmware from other download sites with the files on this page.
- If the downloaded file is much smaller than what is listed in the table above, re-download it, partial files will fail.
What You Need Before Flashing Samsung I9010 Galaxy S Giorgio Armani GT-I9010
You need to prepare a few things on your PC before starting the flash process for the Samsung I9010 Galaxy S Giorgio Armani GT-I9010. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Save Your IMEI Numbers: Type *#06# in the phone dialer and note down both numbers. These are your device identifiers for the cellular network. If flashing wipes them, you will need the originals to write them back.
- Disconnect Google Accounts: Before you start anything, remove all Google accounts from the phone. Settings then Accounts then tap each Google account and remove it. This avoids the FRP verification screen that appears after flashing if accounts were still linked.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Create a Backup: Copy your data to your computer or an SD card. Flashing replaces the entire software on the phone, which means all personal data, apps, and settings will be permanently deleted.
- Charge First: Get the battery above 50% before starting. The flashing process takes a few minutes and the first boot takes several more. A power failure during either stage can leave the device in a state that requires more advanced recovery.
- Prepare Your PC Connection: You need a Windows computer and a USB cable that supports data transfer. Test the cable first by connecting the phone normally, if it shows up in File Explorer, the cable is good.
- Install the Right Drivers:
Install Stock Firmware on Samsung I9010 Galaxy S Giorgio Armani GT-I9010
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Download the Firmware Package:
- Use the download links in the table above to get the correct firmware file for your device.
- Extract the archive with WinRAR or 7-Zip. Use a short folder path like
D:flashto avoid issues with some tools.
- Check Drivers:
- All drivers from the prerequisites must be installed before connecting your device. Restart your computer after installing them.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Press “Start” to begin writing the firmware to your device.
- Do not unplug the phone, close the flash tool, or interact with the device until the process is 100% complete.
- Wait and Reboot:
- After the tool confirms the flash is complete, safely disconnect your phone.
- Press the power button to start your device. The initial boot is slow, wait up to 8 minutes before assuming there is a problem.
Video Guide for Flashing
Normal Behavior After Installing Samsung I9010 Galaxy S Giorgio Armani GT-I9010 Firmware
You will notice several specific behaviors after a successful flash on the Samsung I9010 Galaxy S Giorgio Armani GT-I9010:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
Troubleshooting Samsung I9010 Galaxy S Giorgio Armani GT-I9010 Flash Errors
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung I9010 Galaxy S Giorgio Armani GT-I9010 Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Missing IMEI or Corrupt Baseband on Samsung I9010 Galaxy S Giorgio Armani GT-I9010 After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Frequently Asked Questions
Q1: Will flashing erase my data?
A: Yes, flashing with Odin restores the device to factory state, including Android 2.2 (Froyo) with TouchWiz UI 3.0 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q2: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
Q3: Can I use a Mac or Linux computer for this?
A: Samsung firmware can be flashed using Heimdall on Linux or Mac, but the instructions on this page are written for Odin on Windows. If you only have a Mac, you may want to use a Windows virtual machine or Boot Camp for the most straightforward experience.
Q4: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung I9010 Galaxy S Giorgio Armani GT-I9010 running on the Samsung Exynos 3 (Hummingbird) with 1.0 GHz Cortex-A8 CPU and PowerVR SGX540 GPU chipset. Even variants of the I9010 Galaxy S Giorgio Armani with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q5: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q6: Can I go back to an older firmware version?
A: It is technically possible on some Exynos builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q7: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.
Q8: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
People Also Ask About Samsung I9010 Galaxy S Giorgio Armani GT-I9010
What is the latest firmware version for Samsung I9010 Galaxy S Giorgio Armani GT-I9010?
The latest available Samsung I9010 Galaxy S Giorgio Armani GT-I9010 firmware on this page is version the latest version. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung I9010 Galaxy S Giorgio Armani GT-I9010 erase my data?
Yes. Flashing stock firmware on the Samsung I9010 Galaxy S Giorgio Armani GT-I9010 with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Samsung I9010 Galaxy S Giorgio Armani GT-I9010 model number before flashing?
Go to Settings > About Phone on your Samsung I9010 Galaxy S Giorgio Armani GT-I9010 and look for the model number “GT-I9010”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Samsung I9010 Galaxy S Giorgio Armani GT-I9010?
Yes. If your Samsung I9010 Galaxy S Giorgio Armani GT-I9010 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
Samsung I9010 Galaxy S Giorgio Armani GT-I9010 Firmware, Final Notes
You now have everything needed to flash your Samsung I9010 Galaxy S Giorgio Armani GT-I9010 back to stock using Odin. The process is straightforward as long as you follow the steps in order and do not skip the driver installation.
Got stuck somewhere? Drop a comment with the error message and the step number. I check comments regularly and will point you in the right direction.
If this worked for you, share the page so others with the same device can find it too.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
