Last Updated: July 7, 2026
Everything required to get your Samsung Galaxy Note 8.0 GT-N5100 running again is located right here. You can download the stock firmware, get the necessary tools, and follow a clear guide to restore the device to its original state. I have also included steps for troubleshooting and IMEI repair.
Device: Samsung Galaxy Note 8.0 GT-N5100 | Chipset: Samsung Exynos 4 Quad 4412 | Flash Tool: Odin
Android: Android 4.1.2 (Jelly Bean) | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy Note 8.0 GT-N5100 (Samsung Exynos 4 Quad 4412)
Flash Tool: Odin
Latest Build: the latest version
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung Galaxy Note 8.0 GT-N5100 Firmware (Flash File) Drivers, Tools & Guide
Installing Samsung firmware with Odin is a straightforward process once you understand the requirements. I have put together all the necessary information on this page: the correct firmware file for the Samsung Galaxy Note 8.0 GT-N5100, the proper Odin version, and the steps that work.
One step you must do before you begin is to sign out of your Samsung account on the device. If you skip this, the Knox security feature will trigger, and you will face extra problems later. Also, Samsung firmware comes in .tar.md5 format. After you extract the ZIP, you should see files named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If you do not see these files, you have the wrong package.
The Samsung Galaxy Note 8.0 GT-N5100 uses Odin for firmware installation. This is the same tool that Samsung service centers use, and it works with all Galaxy devices regardless of the chipset. The stock firmware ships with Android 4.1.2 (Jelly Bean), which determines the default apps, security features, and interface you will see after flashing. Only one firmware build is currently available for the Samsung Galaxy Note 8.0 GT-N5100. This is the stock ROM you should use for recovery, unbricking, or FRP bypass.
The Samsung Galaxy Note 8.0 GT-N5100 was released in 2013. This page is maintained with the latest available firmware builds as they become available. The firmware was sourced directly from verified repositories and checked for integrity before being listed on this page.
Your Samsung Galaxy Note 8.0 GT-N5100 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.
Be aware that flashing overwrites the entire software partition. Your data, apps, and accounts will all be removed. This full wipe is how the flash resolves deep software issues, anything from FRP locks and boot failures to Wi-Fi problems and app crashes.
Hard Reset Samsung Galaxy Note 8.0 GT-N5100
To factory reset Samsung Galaxy Note 8.0 GT-N5100 without a computer, power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Samsung Galaxy Note 8.0 GT-N5100 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
Bypass Google Lock on Samsung Galaxy Note 8.0 GT-N5100
The fastest way to bypass FRP on Samsung Galaxy Note 8.0 GT-N5100 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
What Samsung Galaxy Note 8.0 GT-N5100 Firmware Fixes
Samsung devices like the Samsung Galaxy Note 8.0 GT-N5100 are flashed using Odin, regardless of the chipset inside. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:
- Remove persistent malware or adware that survives a factory reset.
- Restore system apps that were accidentally removed or corrupted.
- Restore the original Samsung stock ROM to keep your warranty valid.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Fix startup loops, lagging, and freezing on your device.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Which Firmware Version Does Your Samsung Galaxy Note 8.0 GT-N5100 Need?
The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. GT-N5100). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Firmware Details for Samsung Galaxy Note 8.0 GT-N5100
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Note 8.0 GT-N5100 |
| Firmware Version | N/A |
| File Size | 1.42 GB |
| Android Version | Android 4.1.2 (Jelly Bean) |
| Platform | Samsung Exynos 4 Quad 4412 |
| Release Date | Released 2013, April |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung Galaxy Note 8.0 GT-N5100 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Note 8.0 GT-N5100 Firmware
Download the official stock firmware for your Samsung Galaxy Note 8.0 GT-N5100 below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: N5100DDCMI2_N5100ODDCMI2_INU.zip Size: 1.42 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy Note 8.0 GT-N5100 (GT-N5100) should not be confused with other Galaxy Note 8.0 variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Note 8.0 line can use completely different processors. Always verify your exact model code “GT-N5100” in Settings > About Phone before downloading any firmware from this page.
- Confirm your exact model is GT-N5100, check About Phone, not the marketing name on the box.
- Your device must have a Samsung Exynos 4 Quad 4412 chipset. Boot into recovery mode to verify if unsure.
- Only use files downloaded from this page. Third-party mirrors may serve modified or incomplete packages.
- Compare the file size against the download table. If it does not match, the download is likely corrupt or incomplete.
Prerequisites for Samsung Galaxy Note 8.0 GT-N5100 Firmware
Go through this list before you open Odin for the Samsung Galaxy Note 8.0 GT-N5100. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Save Your IMEI Numbers: Type *#06# in the phone dialer and note down both numbers. These are your device identifiers for the cellular network. If flashing wipes them, you will need the originals to write them back.
- Disconnect Google Accounts: Before you start anything, remove all Google accounts from the phone. Settings then Accounts then tap each Google account and remove it. This avoids the FRP verification screen that appears after flashing if accounts were still linked.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Create a Backup: Copy your data to your computer or an SD card. Flashing replaces the entire software on the phone, which means all personal data, apps, and settings will be permanently deleted.
- Charge First: Get the battery above 50% before starting. The flashing process takes a few minutes and the first boot takes several more. A power failure during either stage can leave the device in a state that requires more advanced recovery.
- Prepare Your PC Connection: You need a Windows computer and a USB cable that supports data transfer. Test the cable first by connecting the phone normally, if it shows up in File Explorer, the cable is good.
- Install the Right Drivers:
Step-by-Step: Flash Samsung Galaxy Note 8.0 GT-N5100 Stock ROM
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters, as some flash tools have trouble with them.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and that your PC has been restarted since installation. Skipping the restart is a common reason drivers do not work correctly.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Click the “Start” button to begin.
- Do not disconnect, move the cable, or touch the device until the process is fully complete. Disconnecting mid-flash is how devices get bricked.
- Wait and Reboot:
- Once flashing finishes successfully, disconnect the device.
- Power on your device. The first boot will take longer than usual, give it up to 8 minutes.
Video Guide for Flashing
What to Expect After Flashing
Here is what is completely normal after a successful flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
Samsung Galaxy Note 8.0 GT-N5100 Flashing Problems and Fixes
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy Note 8.0 GT-N5100 Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Note 8.0 GT-N5100 After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Samsung Galaxy Note 8.0 GT-N5100 Firmware FAQ
Q1: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
Q2: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close Odin, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q3: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q4: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q5: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q6: Can I go back to an older firmware version?
A: It is technically possible on some Exynos builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q7: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.
Q8: Will flashing erase my data?
A: Yes, flashing with Odin restores the device to factory state, including Android 4.1.2 (Jelly Bean) default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
People Also Ask About Samsung Galaxy Note 8.0 GT-N5100
What is the latest firmware version for Samsung Galaxy Note 8.0 GT-N5100?
The latest available Samsung Galaxy Note 8.0 GT-N5100 firmware on this page is version the latest version. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung Galaxy Note 8.0 GT-N5100 erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Note 8.0 GT-N5100 with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Samsung Galaxy Note 8.0 GT-N5100 model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Note 8.0 GT-N5100 and look for the model number “GT-N5100”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Samsung Galaxy Note 8.0 GT-N5100?
Yes. If your Samsung Galaxy Note 8.0 GT-N5100 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
Conclusion
That is everything you need to safely flash the official Samsung Galaxy Note 8.0 GT-N5100 firmware (the latest version) using Odin and get your device working again. If you followed each step, your phone should now be running on a clean build.
If something did not go as expected, a specific error, a step that is not working for your setup, leave a comment below with as much detail as you can: the exact error message, which step you are on, and what you have already tried. I read every comment and will help you work through it.
If this guide helped you, consider sharing it, it is the best way to help someone else who is dealing with the same problem.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
