Last Updated: August 2, 2026
If your Infinix Note 60 X6879 is stuck on a logo, locked out, or not responding, this guide provides the official firmware, the correct flash tool, and clear steps to restore it.
Device: Infinix Note 60 X6879 | Chipset: MediaTek Dimensity 7400 Ultimate | Flash Tool: SP Flash Tool
Android: Android 16, XOS 16 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Note 60 X6879 (MediaTek Dimensity 7400 Ultimate)
Flash Tool: SP Flash Tool
Latest Build: 16.1.0.120SP07
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Note 60 X6879 Firmware (Flash File) Drivers, Tools & Guide
I fix Infinix phones often, and the Note 60 X6879 comes in frequently with FRP locks, bootloops, or being stuck on the logo. This guide covers the firmware, tools, and exact process. One thing I always recommend: extract the firmware to a simple folder path, something like C:FirmwareX6879. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. It is a small detail, but it saves a few minutes of frustration.
The Infinix Note 60 X6879 firmware relies on the MediaTek Dimensity 7400 Ultimate chipset (MediaTek), meaning you will use SP Flash Tool and VCOM/MTK drivers for flashing. These are included in the prerequisites below. The stock firmware ships with Android 16, XOS 16, which determines the default apps, security features, and interface you will see after flashing. The Infinix Note 60 X6879 is a relatively recent device (released 2026), so you should expect active firmware updates and good driver support on modern Windows systems.
As a Transsion Holdings brand, Infinix devices share similar chipset architectures and flashing procedures across the Note 60 lineup. This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page.
Your Infinix Note 60 X6879 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
A full flash will erase everything on the device: apps, accounts, photos, and settings. That is the point, it gives you a clean slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.
Infinix Note 60 X6879 Google Account Bypass After Reset
The fastest way to bypass FRP on Infinix Note 60 X6879 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Factory Reset Infinix Note 60 X6879 Without a PC
To factory reset Infinix Note 60 X6879 without a computer, turn the device off completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Infinix Note 60 X6879 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
Which Firmware Version Does Your Infinix Note 60 X6879 Need?
The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Open About Phone: Your device model must read “X6879” exactly. Even small differences in the code can mean a completely different chipset and partition layout.
- Verify the Chipset Type: This firmware targets MediaTek Dimensity 7400 Ultimate specifically. Flashing it on a different chipset will fail or could brick the device.
- Check Your Current Firmware Version: Compare your build number with the versions listed in the download section to decide which file to use.
- Use Recovery Mode: If you cannot access Settings (phone is stuck or locked), boot into recovery mode to read the build and chipset details from the screen.
- Regional Compatibility: Some Infinix firmware packages target specific regions. Confirm the download matches your device origin.
When Should You Flash Infinix Note 60 X6879?
The Infinix Note 60 X6879 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Recover your device when it only boots into recovery mode.
- Update to the latest Android version supported by your phone.
- Unlock your device if it has been locked or disabled.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Infinix Note 60 X6879
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Note 60 X6879 |
| Firmware Version | 16.1.0.120SP07 |
| File Size | 10.3 GB |
| Android Version | Android 16, XOS 16 |
| Platform | MediaTek Dimensity 7400 Ultimate |
| Release Date | Released 2026, March |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
Use the table below to identify the correct firmware file based on your current phone status.
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | 16.1.0.120SP07, download this one. It is the latest Infinix Note 60 X6879 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash 16.1.0.120SP07 first, then follow the IMEI repair guide. Do not skip the reflash. |
| 16.1.0.120SP07 failed with a flash error | Try the next older version instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | 16.1.0.120SP07, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Infinix Note 60 X6879 Firmware
Download the official stock firmware for your Infinix Note 60 X6879 below. The latest available version is 16.1.0.120SP07. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Note_60_5G_X6879_MT6878_16.1.0.120SP07_TR001PF001AZ_010126_MXML.zip Size: 10.3 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Note 60 X6879 (X6879) should not be confused with other Note 60 variants that may have different chipsets or regional firmware. Even devices in the same Note 60 line can use completely different processors. Always verify your exact model code “X6879” in Settings > About Phone before downloading any firmware from this page.
- Your model number is a variant of X6879 with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from MediaTek Dimensity 7400 Ultimate. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Infinix Note 60 X6879 Firmware
Do not skip this section. Most failed Infinix flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Infinix Note 60 X6879 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Step-by-Step: Flash Infinix Note 60 X6879 Stock ROM
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters, as some flash tools have trouble with them.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and that your PC has been restarted since installation. Skipping the restart is a common reason drivers do not work correctly.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Click the “Download” button to begin.
- Do not disconnect, move the cable, or touch the device until the process is fully complete. Disconnecting mid-flash is how devices get bricked.
- Wait and Reboot:
- Once flashing finishes successfully, disconnect the device.
- Power on your device. The first boot will take longer than usual, give it up to 8 minutes.
Fix Common Infinix Note 60 X6879 Firmware Errors
- Infinix Note 60 X6879 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X6879, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
After Flashing: What Happens Next on Infinix Note 60 X6879
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
Missing IMEI or Corrupt Baseband on Infinix Note 60 X6879 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Infinix Note 60 X6879 Flashing FAQ
Q1: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Infinix support if you are concerned.
Q2: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q3: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q4: Is this firmware compatible with other Infinix models?
A: No. This firmware is built specifically for the Infinix Note 60 X6879 running on the MediaTek Dimensity 7400 Ultimate chipset. Even variants of the Note 60 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q5: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
Q6: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q7: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q8: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
People Also Ask About Infinix Note 60 X6879
What chipset does the Infinix Note 60 X6879 use?
The Infinix Note 60 X6879 uses the MediaTek Dimensity 7400 Ultimate chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
What is the latest firmware version for Infinix Note 60 X6879?
The latest available Infinix Note 60 X6879 firmware on this page is version 16.1.0.120SP07. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
Can flashing firmware fix a bricked Infinix Note 60 X6879?
Yes. If your Infinix Note 60 X6879 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.
How do I check my Infinix Note 60 X6879 model number before flashing?
Go to Settings > About Phone on your Infinix Note 60 X6879 and look for the model number “X6879”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Wrapping Up: Infinix Note 60 X6879 Firmware
Completing the flash process restores the Infinix Note 60 X6879 to a clean, working state.
The flash is done. Your Infinix Note 60 X6879 is back on official stock firmware and should be running without the issues that brought you here.
If anything went differently than described, an error message, a step that did not match your setup, post it in the comments. I respond to every question.
This guide gets updated when new builds are released, so you can come back anytime you need a newer version.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
