Tecno Camon 50 4G CN5 Firmware

Last Updated: July 31, 2026

You can restore your Tecno Camon 50 4G CN5 to working order using the official stock firmware provided below. I have seen these phones come in regularly with bootloops, stuck logos, and FRP locks, and the right firmware usually fixes them instantly. This guide provides the necessary tools, the scatter file, and a clear procedure to get your device back to its original state. ⚡ At a Glance Device: Tecno Camon 50 4G CN5  |  Chipset: MediaTek MT6789 Helio G99  |  Flash Tool: SP Flash Tool Android: Android 16, HIOS 16  |  File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) ⚠ Warning: Flashing erases all data. Back up first.

---

Tecno Camon 50 4G CN5 Firmware (Flash File) Drivers, Tools & Guide

You can restore your Tecno Camon 50 4G CN5 to working order using the official stock firmware provided below. I have seen these phones come in regularly with bootloops, stuck logos, and FRP locks, and the right firmware usually fixes them instantly. This guide provides the necessary tools, the scatter file, and a clear procedure to get your device back to its original state. ⚡ At a Glance Device: Tecno Camon 50 4G CN5  |  Chipset: MediaTek MT6789 Helio G99  |  Flash Tool: SP Flash Tool Android: Android 16, HIOS 16  |  File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) ⚠ Warning: Flashing erases all data. Back up first.

One tip I always give before you start: extract the firmware to a simple folder path, something like C:FirmwareCN5. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. It is a small thing, but it saves a frustrating few minutes of wondering why the tool is not loading the file.

The Tecno Camon 50 4G CN5 runs on a MediaTek MT6789 Helio G99 chipset (MediaTek), which means you will use SP Flash Tool and VCOM/MTK drivers for flashing. These are included in the prerequisites below. The stock firmware ships with Android 16, HIOS 16, which determines the default apps, security features, and interface you will see after flashing. The Tecno Camon 50 4G CN5 is a relatively recent device (released 2026), so you should expect active firmware updates and good driver support on modern Windows systems.

As a Transsion Holdings brand, Tecno devices share similar chipset architectures and flashing procedures across the Camon 50 4G lineup. This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page.

Your Tecno Camon 50 4G CN5 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.

Be aware that flashing overwrites the entire software partition. Your data, apps, and accounts will all be removed. This full wipe is how the flash resolves deep software issues, anything from FRP locks and boot failures to Wi-Fi problems and app crashes.

---

Remove FRP Lock on Tecno Camon 50 4G CN5

The fastest way to bypass FRP on Tecno Camon 50 4G CN5 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.

---

How to Wipe Tecno Camon 50 4G CN5 to Factory Settings

To factory reset Tecno Camon 50 4G CN5 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores Tecno Camon 50 4G CN5 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.

---

Which Firmware Version Does Your Tecno Camon 50 4G CN5 Need?

The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:

1. Open About Phone: Your device model must read “CN5” exactly. Even small differences in the code can mean a completely different chipset and partition layout.
2. Verify the Chipset Type: This firmware targets MediaTek MT6789 Helio G99 specifically. Flashing it on a different chipset will fail or could brick the device.
3. Check Your Current Firmware Version: Compare your build number with the versions listed in the download section to decide which file to use.
4. Use Recovery Mode: If you cannot access Settings (phone is stuck or locked), boot into recovery mode to read the build and chipset details from the screen.
5. Regional Compatibility: Some Tecno firmware packages target specific regions. Confirm the download matches your device origin.

---

When Should You Flash Tecno Camon 50 4G CN5?

The Tecno Camon 50 4G CN5 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:

• Recover your device when it only boots into recovery mode.
• Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
• Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
• Resolve OTA update failures and battery drain issues.
• Restore the original Tecno stock ROM to keep your warranty valid.
• Fix startup loops, lagging, and freezing on your device.
• Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.

Learn more about stock ROMs and why flashing works.

---

Firmware Details for Tecno Camon 50 4G CN5

Here is a quick overview of the official firmware specifications:

Firmware Information	Details
Device Model	Tecno Camon 50 4G CN5
Firmware Version	16.1.0.150SP14
File Size	11.8 GB
Android Version	Android 16, HIOS 16
Platform	MediaTek MT6789 Helio G99
Release Date	Released 2026, March
Region	Global, Africa and Asia
File Type	ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)

---

Which Firmware Version Should I Download?

This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	16.1.0.150SP14, download this one. It is the latest Tecno Camon 50 4G CN5 firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Phone slow after a recent OTA update	Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better.
IMEI missing after a previous flash	Re-flash 16.1.0.150SP14 first, then follow the IMEI repair guide. Do not skip the reflash.
16.1.0.150SP14 failed with a flash error	Try the next older version instead and double-check your scatter file selection before assuming the firmware is the problem.
Restoring to factory / warranty repair	16.1.0.150SP14, clean state, fresh start.

My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.

---

Download Tecno Camon 50 4G CN5 Firmware

Download the official stock firmware for your Tecno Camon 50 4G CN5 below. The latest available version is 16.1.0.150SP14. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: Tecno_Camon_50_4G_CN5_MT6789_16.1.0.150SP14_OP003PF001AZ_010126_MXML.zip Size: 11.8 GB	Download Link	Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Tecno Camon 50 4G CN5 (CN5) should not be confused with other Camon 50 4G variants that may have different chipsets or regional firmware. Even devices in the same Camon 50 4G line can use completely different processors. Always verify your exact model code “CN5” in Settings > About Phone before downloading any firmware from this page.

---

Tecno Camon 50 4G CN5 Flash Setup Checklist

Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Camon 50 4G CN5 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.

1. Save Your IMEI Numbers: Type *#06# in the phone dialer and note down both numbers. These are your device identifiers for the cellular network. If flashing wipes them, you will need the originals to write them back.
2. Disconnect Google Accounts: Before you start anything, remove all Google accounts from the phone. Settings then Accounts then tap each Google account and remove it. This avoids the FRP verification screen that appears after flashing if accounts were still linked.
3. Create a Backup: Copy your data to your computer or an SD card. Flashing replaces the entire software on the phone, which means all personal data, apps, and settings will be permanently deleted.
4. Charge First: Get the battery above 50% before starting. The flashing process takes a few minutes and the first boot takes several more. A power failure during either stage can leave the device in a state that requires more advanced recovery.
5. Prepare Your PC Connection: You need a Windows computer and a USB cable that supports data transfer. Test the cable first by connecting the phone normally, if it shows up in File Explorer, the cable is good.
6. Install the Right Drivers:
   • VCOM Drivers
   • Tecno USB Drivers

---

How to Install Firmware on Tecno Camon 50 4G CN5

We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.

1. Prepare the Flash Files:
   • Go to the download section and grab the firmware package that matches your device.
   • Unzip the file to a folder on your desktop. Avoid using folder names with non-English characters or spaces, the flash tool may not read them correctly.
2. Confirm Driver Setup:
   • The drivers listed in prerequisites need to be installed and working before you connect the phone. If you are not sure, reinstall them and restart your computer.
3. Load the Firmware File:
   • Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
4. Connect Your Device:
   • Power off your phone completely, not sleep mode, fully off.
   • Connect to your PC via USB cable. The flash tool will detect it automatically.
5. Start Flashing:
   • Click “Download” to kick off the firmware write.
   • Hands off the phone and cable until the tool shows completion. Moving or disconnecting the device mid-flash is the most common cause of a bricked phone.
6. Wait and Reboot:
   • When you see the success message, disconnect the USB cable.
   • Hold the power button to boot the phone. Give it a solid 5 to 8 minutes for the first startup, this is normal.

---

Common Issues When Flashing Tecno Camon 50 4G CN5

1. Tecno Camon 50 4G CN5 Not Recognized by SP Flash Tool:
   • In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the CN5, restart your PC, and try again before changing anything else.
   • If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
   • Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
2. Boot Loop After Flashing:
   • Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
3. Wrong Scatter File / Firmware Mismatch:
   • If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
4. “Download DA FAIL” Error:
   • This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
5. Error 8038 (BROM Error):
   • The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
6. Auth File / Secure Boot Error in Newer SP Flash Tool:
   • Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.

---

What Is Normal After a Tecno Camon 50 4G CN5 Flash?

Here is what is completely normal after a successful flash:

• How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
• Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
• First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
• The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
• Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
• Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
• The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.

---

Missing IMEI or Corrupt Baseband on Tecno Camon 50 4G CN5 After Flashing?

A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:

1. Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
2. Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
3. Run the repair:
   • Connect your device to the computer.
   • Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
   • Click “Start” and let it complete without interrupting the connection.
4. Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.

Video Guide: How to repair IMEI

Credits: https://www.youtube.com/@mhgsmclinic

---

Tecno Camon 50 4G CN5 Flashing FAQ

Q1: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.

Q2: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.

Q3: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.

Q4: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.

Q5: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Camon 50 4G CN5 running on the MediaTek MT6789 Helio G99 chipset. Even variants of the Camon 50 4G with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.

Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.

Q7: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.

Q8: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 16, HIOS 16 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.

People Also Ask About Tecno Camon 50 4G CN5

Will flashing firmware on Tecno Camon 50 4G CN5 erase my data?
Yes. Flashing stock firmware on the Tecno Camon 50 4G CN5 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.

What is the latest firmware version for Tecno Camon 50 4G CN5?
The latest available Tecno Camon 50 4G CN5 firmware on this page is version 16.1.0.150SP14. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.

Can flashing firmware fix a bricked Tecno Camon 50 4G CN5?
Yes. If your Tecno Camon 50 4G CN5 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.

How do I check my Tecno Camon 50 4G CN5 model number before flashing?
Go to Settings > About Phone on your Tecno Camon 50 4G CN5 and look for the model number “CN5”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

---

Final Thoughts

The flash is done. Your Tecno Camon 50 4G CN5 is back on official stock firmware and should be running without the issues that brought you here.

If anything went differently than described, an error message, a step that did not match your setup, post it in the comments. I respond to every question.

This guide gets updated when new builds are released, so you can come back anytime you need a newer version.

Browse all Tecno firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.