Infinix Note 50 Pro Plus X6856 Firmware

Last Updated: August 10, 2026

This page contains the complete resources for the Infinix Note 50 Pro+ X6856: the official stock ROM files, the necessary drivers and tools, and step-by-step instructions to fix bootloops, bypass FRP locks, or perform a clean reflash.

---

Infinix Note 50 Pro+ X6856 Firmware (Flash File) Drivers, Tools & Guide

The Infinix Note 50 Pro+ X6856 firmware is essential for anyone dealing with software glitches on this specific device. I have seen this model come in frequently with bootloop problems or FRP lock issues. This guide provides the complete package: the files, the tools, and the exact steps to get the phone working again.

One helpful tip before starting: extract the firmware to a folder with a simple name, such as C:FirmwareX6856. SP Flash Tool can sometimes struggle if the path contains spaces or special characters. This small step saves time and frustration.

The stock firmware for the Infinix Note 50 Pro+ X6856 comes with Android 15 and XOS 15. This version dictates the interface, default apps, and security features you will see after the flash. Since this is a relatively new device, you should expect good driver support on modern Windows systems. There are two firmware files available for the Infinix Note 50 Pro+ X6856 on this page. Select the one that matches your current Android version for the best results.

This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page. As a Transsion Holdings brand, Infinix devices share similar chipset architectures and flashing procedures across the Note 50 Pro+ lineup.

Your Infinix Note 50 Pro+ X6856 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.

Once you flash, the device goes back to factory condition. Everything stored on the phone, photos, messages, apps, will be gone. This clean state is what allows the flash to fix stuck logos, FRP locks, software corruption, and performance issues.

---

Reset Infinix Note 50 Pro+ X6856 From Recovery Mode

To factory reset Infinix Note 50 Pro+ X6856 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores Infinix Note 50 Pro+ X6856 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.

---

FRP Removal for Infinix Note 50 Pro+ X6856

The fastest way to bypass FRP on Infinix Note 50 Pro+ X6856 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.

---

When Should You Flash Infinix Note 50 Pro+ X6856?

You should flash the stock firmware on the Infinix Note 50 Pro+ X6856 when the device is stuck, slow, or experiencing software errors. The Infinix Note 50 Pro+ X6856 uses a MediaTek chipset, so SP Flash Tool is the standard tool for recovery. Here is what flashing the stock firmware can help with:

• Fix startup loops, lagging, and freezing on your device.
• Update to the latest Android version supported by your phone.
• Restore system apps that were accidentally removed or corrupted.
• Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
• Restore the original Infinix stock ROM to keep your warranty valid.
• Unlock your device if it has been locked or disabled.
• Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.

Learn more about stock ROMs and why flashing works.

---

Choosing the Right Firmware Version

Choosing the correct firmware version for the Infinix Note 50 Pro+ X6856 prevents bricking the device. Before downloading anything, verify your exact device identity:

1. Find Your Model Code: Go to Settings, then About Phone. The code should be “X6856”. If it is a different variant, do not use this firmware.
2. Cross-Check the Chipset: The Note 50 Pro+ X6856 uses MediaTek Dimensity 8350 Ultimate (MT6897). If your phone shows a different chipset in recovery mode, stop and find the correct firmware for your hardware.
3. Note Your Current Build: Write down the build number shown in About Phone. This helps you compare versions and decide whether to upgrade or reflash the same version.
4. Boot Into Recovery: Recovery mode (Volume Up + Power while off) is the safest way to double-check your model info before committing to a flash.
5. Check Download Size: After downloading, verify the file size matches the table on this page. Corrupt or partial downloads are a common cause of flash failures.

---

Firmware Details for Infinix Note 50 Pro+ X6856

Here is a quick overview of the official firmware specifications:

Firmware Information	Details
Device Model	Infinix Note 50 Pro+ X6856
Firmware Version	15.0.3.123
File Size	7.6 GB to 8.4 GB
Android Version	Android 15, XOS 15
Platform	MediaTek Dimensity 8350 Ultimate (MT6897)
Release Date	Released 2025, April
Region	Global, Africa and Asia
File Type	ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)

---

Which Firmware Version Should I Download?

This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	15.0.3.123, download this one. It is the latest Infinix Note 50 Pro+ X6856 firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Phone slow after a recent OTA update	Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better.
IMEI missing after a previous flash	Re-flash 15.0.3.123 first, then follow the IMEI repair guide. Do not skip the reflash.
15.0.3.123 failed with a flash error	Try the next older version instead and double-check your scatter file selection before assuming the firmware is the problem.
Restoring to factory / warranty repair	15.0.3.123, clean state, fresh start.

My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.

---

Download Infinix Note 50 Pro+ X6856 Firmware

Download the official stock firmware for your Infinix Note 50 Pro+ X6856 below. The latest available version is 15.0.3.123. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: Infinix_Note_50_Pro_Plus_X6856_MT6897_15.0.3.123_OP001PF001AZ_MXML.zip Size: 8.4 GB	Download Link	Download Link2

File Name: Infinix-Note-50-Pro-Plus-X6856.rar Size: 7.6 GB

Download Link

Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Infinix Note 50 Pro+ X6856 (X6856) should not be confused with other Note 50 Pro+ variants that may have different chipsets or regional firmware. Even devices in the same Note 50 Pro+ line can use completely different processors. Always verify your exact model code “X6856” in Settings > About Phone before downloading any firmware from this page.

---

Prepare Your Infinix Note 50 Pro+ X6856 for Flashing

Do not skip this section. Most failed Infinix flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Infinix Note 50 Pro+ X6856 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.

1. Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
2. Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
3. Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
4. Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
5. Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
6. Set Up Drivers:
   • VCOM Drivers
   • Infinix USB Drivers

---

Install Stock Firmware on Infinix Note 50 Pro+ X6856

We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.

1. Download the Firmware Package:
   • Use the download links in the table above to get the correct firmware file for your device.
   • Extract the archive with WinRAR or 7-Zip. Use a short folder path like D:flash to avoid issues with some tools.
2. Check Drivers:
   • All drivers from the prerequisites must be installed before connecting your device. Restart your computer after installing them.
3. Load the Firmware File:
   • Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
4. Connect Your Device:
   • Power off your phone completely, not sleep mode, fully off.
   • Connect to your PC via USB cable. The flash tool will detect it automatically.
5. Start Flashing:
   • Press “Download” to begin writing the firmware to your device.
   • Do not unplug the phone, close the flash tool, or interact with the device until the process is 100% complete.
6. Wait and Reboot:
   • After the tool confirms the flash is complete, safely disconnect your phone.
   • Press the power button to start your device. The initial boot is slow, wait up to 8 minutes before assuming there is a problem.

---

What Is Normal After a Infinix Note 50 Pro+ X6856 Flash?

Here is what is completely normal after a successful flash:

• How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
• Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
• The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
• Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
• Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
• Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
• First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.

---

Troubleshooting Infinix Note 50 Pro+ X6856 Flash Errors

1. Infinix Note 50 Pro+ X6856 Not Recognized by SP Flash Tool:
   • In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X6856, restart your PC, and try again before changing anything else.
   • If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
   • Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
2. Boot Loop After Flashing:
   • Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
3. Wrong Scatter File / Firmware Mismatch:
   • If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
4. “Download DA FAIL” Error:
   • This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
5. Error 8038 (BROM Error):
   • The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
6. Auth File / Secure Boot Error in Newer SP Flash Tool:
   • Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.

---

Missing IMEI or Corrupt Baseband on Infinix Note 50 Pro+ X6856 After Flashing?

A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:

1. Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
2. Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
3. Run the repair:
   • Connect your device to the computer.
   • Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
   • Click “Start” and let it complete without interrupting the connection.
4. Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.

Video Guide: How to repair IMEI

Credits: https://www.youtube.com/@mhgsmclinic

---

Frequently Asked Questions

Q1: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.

Q2: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.

Q3: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.

Q4: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.

Q5: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.

Q6: Is this firmware compatible with other Infinix models?
A: No. This firmware is built specifically for the Infinix Note 50 Pro+ X6856 running on the MediaTek Dimensity 8350 Ultimate (MT6897) chipset. Even variants of the Note 50 Pro+ with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.

Q7: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.

Q8: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Infinix support if you are concerned.

People Also Ask About Infinix Note 50 Pro+ X6856

How do I check my Infinix Note 50 Pro+ X6856 model number before flashing?
Go to Settings > About Phone on your Infinix Note 50 Pro+ X6856 and look for the model number “X6856”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

Can flashing firmware fix a bricked Infinix Note 50 Pro+ X6856?
Yes. If your Infinix Note 50 Pro+ X6856 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.

What is the latest firmware version for Infinix Note 50 Pro+ X6856?
The latest available Infinix Note 50 Pro+ X6856 firmware on this page is version 15.0.3.123. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.

Will flashing firmware on Infinix Note 50 Pro+ X6856 erase my data?
Yes. Flashing stock firmware on the Infinix Note 50 Pro+ X6856 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.

---

Final Thoughts

The flash is done. Your Infinix Note 50 Pro+ X6856 is back on official stock firmware and should be running without the issues that brought you here.

If anything went differently than described, an error message, a step that did not match your setup, post it in the comments. I respond to every question.

This guide gets updated when new builds are released, so you can come back anytime you need a newer version.

Browse all Infinix firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.