Last Updated: August 6, 2026
The Infinix Note 10 Pro X695D comes in regularly with issues like FRP locks, bootloops, or being stuck on the logo. This guide provides the firmware, tools, and exact process needed to fix these problems.
Device: Infinix Note 10 Pro X695D | Chipset: MediaTek MT6785 Helio G95 | Flash Tool: SP Flash Tool
Android: Android 11, XOS 7.6 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Note 10 Pro X695D (MediaTek MT6785 Helio G95)
Flash Tool: SP Flash Tool
Latest Build: V248
Firmware Files: 7 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Note 10 Pro X695D Firmware (Flash File) Drivers, Tools & Guide
I recommend extracting the firmware to a simple folder path, such as C:FirmwareX695D. SP Flash Tool can sometimes struggle to locate the scatter file if the folder path contains spaces or special characters. It is a small detail, but it saves a few frustrating minutes of wondering why the tool is not loading the file.
This device launched in 2021, so Windows 10 and 11 may require manual driver installation rather than plug-and-play. The stock firmware ships with Android 11, XOS 7.6, which determines the default apps and interface you will see after flashing. Because the Infinix Note 10 Pro X695D runs on a MediaTek MT6785 Helio G95 chipset, you must use SP Flash Tool and the specific VCOM drivers provided below.
We verified the file integrity against two independent sources to ensure these are unmodified stock ROMs. The Infinix Note 10 Pro X695D was released in 2021, and this page is updated with the latest available firmware builds.
Download the firmware ZIP file using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
Be aware that flashing overwrites the entire software partition. Your data, apps, and accounts will all be removed. This full wipe is how the flash resolves deep software issues, from FRP locks and boot failures to Wi-Fi problems and app crashes.
Infinix Note 10 Pro X695D FRP Bypass
The fastest way to bypass FRP on the Infinix Note 10 Pro X695D is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Hard Reset Infinix Note 10 Pro X695D
To factory reset Infinix Note 10 Pro X695D without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Infinix Note 10 Pro X695D to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
How to Pick the Correct Infinix Note 10 Pro X695D Firmware
The most common mistake is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Open About Phone: Your device model must read “X695D” exactly. Even small differences in the code can mean a completely different chipset and partition layout.
- Verify the Chipset Type: This firmware targets MediaTek MT6785 Helio G95 specifically. Flashing it on a different chipset will fail or could brick the device.
- Check Your Current Firmware Version: Compare your build number with the versions listed in the download section to decide which file to use.
- Use Recovery Mode: If you cannot access Settings (phone is stuck or locked), boot into recovery mode to read the build and chipset details from the screen.
- Regional Compatibility: Some Infinix firmware packages target specific regions. Confirm the download matches your device origin.
Why Flash Stock ROM on Infinix Note 10 Pro X695D?
The Infinix Note 10 Pro X695D uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Remove persistent malware or adware that survives a factory reset.
- Resolve OTA update failures and battery drain issues.
- Unlock your device if it has been locked or disabled.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Update to the latest Android version supported by your phone.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Infinix Note 10 Pro X695D
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Note 10 Pro X695D |
| Firmware Version | V54, V248, V152, V111, V102 |
| File Size | 3.52 GB to 3.92 GB |
| Android Version | Android 11, XOS 7.6 |
| Platform | MediaTek MT6785 Helio G95 |
| Release Date | Released 2021, June 07 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V248, download this one. It is the latest Infinix Note 10 Pro X695D firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V152, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V248 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V248 failed with a flash error | Try V152 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V248, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Infinix Note 10 Pro X695D Firmware
Download the official stock firmware for your Infinix Note 10 Pro X695D below. The latest available version is V248. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Note_10_Pro_X695D_MT6785_V54_210707.zip Size: 3.52 GB | Download Link | Download Link2 |
| File Name: X695D-H854N-R-OP-220510V248.zip Size: 3.92 GB | Download Link | Download Link2 |
| File Name: Infinix_Note_10_Pro_X695D_MT6785_V152_210917.zip Size: 3.8 GB | Download Link | Download Link2 |
| File Name: X695D-H854N-R-OP-210813V111.zip Size: 3.75 GB | Download Link | Download Link2 |
| File Name: X695D-H854N-R-OP-210806V102.zip Size: 3.73 GB | Download Link | Download Link2 |
| File Name: Infinix_Note_10_Pro_X695D_MT6785_V54_210707.zip Size: 3.55 GB | Download Link | Download Link2 |
| File Name: X695D-H854N-R-OP-210707V54.zip Size: 3.6 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Note 10 Pro X695D (X695D) should not be confused with other Note 10 Pro variants that may have different chipsets or regional firmware. Even devices in the same Note 10 Pro line can use completely different processors. Always verify your exact model code “X695D” in Settings > About Phone before downloading any firmware from this page.
- Your model number is a variant of X695D with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from MediaTek MT6785 Helio G95. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prepare Your Infinix Note 10 Pro X695D for Flashing
Do not skip this section. Most failed Infinix flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Infinix Note 10 Pro X695D and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
How to Install Firmware on Infinix Note 10 Pro X695D
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Download the Firmware Package:
- Use the download links in the table above to get the correct firmware file for your device.
- Extract the archive with WinRAR or 7-Zip. Use a short folder path like
D:flashto avoid issues with some tools.
- Check Drivers:
- All drivers from the prerequisites must be installed before connecting your device. Restart your computer after installing them.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Press “Download” to begin writing the firmware to your device.
- Do not unplug the phone, close the flash tool, or interact with the device until the process is 100% complete.
- Wait and Reboot:
- After the tool confirms the flash is complete, safely disconnect your phone.
- Press the power button to start your device. The initial boot is slow, wait up to 8 minutes before assuming there is a problem.
Infinix Note 10 Pro X695D Flashing Problems and Fixes
- Infinix Note 10 Pro X695D Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X695D, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
What Is Normal After a Infinix Note 10 Pro X695D Flash?
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
Missing IMEI or Corrupt Baseband on Infinix Note 10 Pro X695D After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Questions About Infinix Note 10 Pro X695D Firmware
Q1: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q2: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q3: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Infinix support if you are concerned.
Q4: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q5: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q6: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 11, XOS 7.6 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q7: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q8: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
People Also Ask About Infinix Note 10 Pro X695D
Will flashing firmware on Infinix Note 10 Pro X695D erase my data?
Yes. Flashing stock firmware on the Infinix Note 10 Pro X695D with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Infinix Note 10 Pro X695D model number before flashing?
Go to Settings > About Phone on your Infinix Note 10 Pro X695D and look for the model number “X695D”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
What chipset does the Infinix Note 10 Pro X695D use?
The Infinix Note 10 Pro X695D uses the MediaTek MT6785 Helio G95 chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
What is the latest firmware version for Infinix Note 10 Pro X695D?
The latest available Infinix Note 10 Pro X695D firmware on this page is version V248. This page has 7 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Conclusion
You now have everything needed to flash your Infinix Note 10 Pro X695D back to stock using SP Flash Tool. The process is straightforward as long as you follow the steps in order and do not skip the driver installation.
Got stuck somewhere? Drop a comment with the error message and the step number. I check comments regularly and will point you in the right direction.
If this worked for you, share the page so others with the same device can find it too.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
