Last Updated: August 19, 2026
Find everything you need for the Infinix Note 7 Lite X656 firmware here: official downloads, proper drivers, flash tools, and step-by-step instructions to unbrick, bypass FRP, or perform a clean reflash.
Device: Infinix Note 7 Lite X656 | Chipset: MediaTek MT6765 | Flash Tool: SP Flash Tool
Android: Android 10, XOS 6.0 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Note 7 Lite X656 (MediaTek MT6765)
Flash Tool: SP Flash Tool
Latest Build: V386
Firmware Files: 9 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Note 7 Lite X656 Firmware (Flash File) Drivers, Tools & Guide
The Infinix Note 7 Lite X656 firmware provides the official software needed to restore your device to its original state. This guide covers the full process for flashing, including downloads, driver setup, and step-by-step instructions for unbricking, FRP bypass, or clean reflashing.
Before starting, extract the firmware to a simple folder path like C:FirmwareX656. SP Flash Tool may have trouble locating the scatter file if the path contains spaces or special characters. This small step prevents frustrating tool detection issues later.
The Infinix Note 7 Lite X656 uses a MediaTek MT6765 chipset, requiring SP Flash Tool and VCOM/MTK drivers for flashing. Stock firmware includes Android 10 with XOS 6.0, which determines the default apps and interface after flashing. Released in 2020, this device may require manual driver installation on newer Windows systems (10/11) rather than plug-and-play.
The Infinix Note 7 Lite X656 firmware downloads come as compressed ZIP files. Use WinRAR or 7-Zip to extract them. After extraction, confirm the folder contains the scatter file before proceeding.
Flashing returns the device to factory condition. All personal data—photos, messages, apps—will be removed. This clean state resolves stuck logos, FRP locks, software corruption, and performance issues.
Infinix Note 7 Lite X656 FRP Bypass
To bypass FRP on the Infinix Note 7 Lite X656, use a free Android apps launcher during the setup wizard. After flashing or factory reset, you may encounter a Google account lock (FRP). Our free Android apps launcher provides the fastest solution. Always remove your Google account before flashing to avoid this issue entirely.
Hard Reset Infinix Note 7 Lite X656
Factory reset the Infinix Note 7 Lite X656 by powering it off completely, then holding Volume Up and Power simultaneously to enter recovery. Use volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores the Infinix Note 7 Lite X656 to its original factory state. This resolves most software problems—slow performance, app crashes, forgotten screen locks, and bootloops. If issues persist after resetting, use SP Flash Tool for a full firmware flash as detailed below.
Which Firmware Version Does Your Infinix Note 7 Lite X656 Need?
You must identify the exact firmware version for your Infinix Note 7 Lite X656 to avoid compatibility issues. Before downloading, verify your device identity:
- Verify Your Exact Model: In Settings, confirm the model code “X656”. Some Infinix phones share marketing names but have different internal hardware.
- Confirm the Processor: This firmware targets the MediaTek MT6765 chipset. Check via recovery mode or a hardware info app.
- Review the Version Number: The firmware version should match or exceed your current build number.
- Use Recovery Mode as a Safety Check: Before flashing, boot into recovery to see the current build number and chipset printed on screen.
- Verify the Region: Some builds are region-specific. Confirm the download matches your region or is labeled global.
Why Flash Stock ROM on Infinix Note 7 Lite X656?
Flashing stock firmware on the Infinix Note 7 Lite X656 resolves software issues and restores stability. Here’s what this process can accomplish:
- Fix Wi-Fi, Bluetooth, or mobile data connectivity issues after updates.
- Clear forgotten screen locks, PINs, or patterns without original credentials.
- Resolve touchscreen problems caused by corrupted system files.
- Update to the latest supported Android version.
- Remove persistent malware that survives factory resets.
- Restore accidentally removed or corrupted system apps.
- Resolve “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek MT6765 chipset.
Learn more about stock ROMs and why flashing works.
Firmware Details for Infinix Note 7 Lite X656
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Note 7 Lite X656 |
| Firmware Version | V130, V386, V376, V364, V96, V313, V255, V368 |
| File Size | 1.83 GB to 4.04 GB |
| Android Version | Android 10, XOS 6.0 |
| Platform | MediaTek MT6765 |
| Release Date | Released 2020, July |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
Select the appropriate firmware version based on your specific issue:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V386, download this one. It is the latest Infinix Note 7 Lite X656 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V376, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V386 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V386 failed with a flash error | Try V376 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V386, clean state, fresh start. |
General approach for MTK devices: always try the latest version first. Many users waste time with older builds when the newest one works fine. Only use an older version if the latest fails repeatedly, and confirm it’s a driver issue, not firmware.
Download Infinix Note 7 Lite X656 Firmware
Download the official stock firmware for your Infinix Note 7 Lite X656 below. The latest available version is V386. After downloading, verify the file size matches the table above—size mismatches usually indicate corrupt downloads, which can cause more problems.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Note_7_Lite_X656_MT6765_V130_191224.zip Size: 4.04 GB | Download Link | Download Link2 |
| File Name: X656-H6211DLNP-Q-OP-220311V386.zip Size: 2.3 GB | Download Link | Download Link2 |
| File Name: Infinix+X656-H6211DLNP-Q-OP-211101V376_MT6765.zip Size: 2.3 GB | Download Link | Download Link2 |
| File Name: X656-H6211DLNP-Q-OP-210520V364.zip Size: 2.31 GB | Download Link | Download Link2 |
| File Name: Infinix+X656-H6211D-Q-KESF-201216V96_MT6765.zip Size: 2.24 GB | Download Link | Download Link2 |
| File Name: X656-H6211DLNP-Q-OP-200622V313.zip Size: 2.23 GB | Download Link | Download Link2 |
| File Name: X656-H6211DLNP-Q-200326V255.zip Size: 1.83 GB | Download Link | Download Link2 |
| File Name: X656-H6211DLNP-Q-191224V130.zip Size: 2.23 GB | Download Link | Download Link2 |
| File Name: X656-H6211DLNP-Q-OP-210630V368.zip Size: 2.3 GB | Download Link | Download Link2 |
Only download firmware fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Note 7 Lite X656 (X656) should not be confused with other Note 7 Lite variants that may have different chipsets or regional firmware. Even devices in the same Note 7 Lite line can use completely different processors. Always verify your exact model code “X656” in Settings > About Phone before downloading any firmware from this page.
- Confirm your exact model is X656, check About Phone, not the marketing name on the box.
- Your device must have a MediaTek MT6765 chipset. Boot into recovery mode to verify if unsure.
- Only use files downloaded from this page. Third-party mirrors may serve modified or incomplete packages.
- Compare the file size against the download table. If it does not match, the download is likely corrupt or incomplete.
Prerequisites for Infinix Note 7 Lite X656 Firmware
Do not skip this section. Most failed Infinix flashes occur from rushing through preparation steps. The VCOM driver installation is essential for the Infinix Note 7 Lite X656 and other MediaTek devices. Windows may show the device in Device Manager, but SP Flash Tool will not detect it without the correct VCOM driver.
- Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
- Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
- Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
- Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
- Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
- Set Up Drivers:
Infinix Note 7 Lite X656 Firmware Installation Guide
Follow these steps to flash the Infinix Note 7 Lite X656 firmware using SP Flash Tool. For older devices, start with SP Flash Tool v5.1924. Newer versions require a DA (Download Agent) file that older firmware packages lack, causing “Auth” errors. If SP Flash Tool requests an auth file you do not have, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available for additional details.
- Prepare the Flash Files:
- Go to the download section and grab the firmware package matching your device.
- Unzip the file to a folder on your desktop. Avoid non-English characters or spaces in folder names, the flash tool may not read them correctly.
- Confirm Driver Setup:
- The drivers listed in prerequisites must be installed and working before connecting the phone. If unsure, reinstall them and restart your computer.
- Load the Firmware File:
- Click “Scatter-loading” and navigate to the extracted firmware folder. Select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Click “Download” to begin the firmware write.
- Keep the phone and cable untouched until the tool shows completion. Moving or disconnecting the device mid-flash is the most common cause of bricking.
- Wait and Reboot:
- When you see the success message, disconnect the USB cable.
- Hold the power button to boot the phone. Allow 5 to 8 minutes for the first startup, this is normal.
Common Issues When Flashing Infinix Note 7 Lite X656
- Infinix Note 7 Lite X656 Not Recognized by SP Flash Tool:
- This is usually a driver issue, not cable-related. Reinstall the VCOM drivers for the X656, restart your PC, and try again before changing other settings.
- If that fails, switch to a USB 2.0 port, USB 3.0 ports frequently cause detection problems with MediaTek devices.
- Still unresolved? Temporarily disable your antivirus. It can block VCOM driver loading without showing any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek stem from conflicts with cached data, a recovery wipe usually fixes this without reflashing.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error when starting the download, verify your scatter file first. A mismatch between the scatter file and your device build is a common cause of flash errors.
- “Download DA FAIL” Error:
- This error occurs regularly and typically indicates improper VCOM driver installation. Reinstall the driver, restart your PC, and try again. If the problem persists, try SP Flash Tool v5.1924, older devices often respond better to this version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require holding Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer SP Flash Tool versions require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you lack this file, use MTK Client instead, it handles Secure Boot automatically and simplifies the process.
Normal Behavior After Installing Infinix Note 7 Lite X656 Firmware
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will display a green circle or checkmark when done. If you see this, the flash completed successfully.
- Wi-Fi, Bluetooth, and mobile data should all work after setup. If mobile data fails, go to Settings, SIM and Network, and manually re-enter your APN, the flash sometimes clears carrier settings.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition typically ranges from 4 to 8 GB.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs as it would with a new device.
- Notification sounds and ringtones will revert to factory defaults. Any custom tones will need to be re-downloaded and reassigned in Settings.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it during the setup wizard, not later through Settings.
- Battery percentage may seem inaccurate for the first day. Battery statistics calibrate during normal use. Charge the phone fully once without interruption for stable readings.
Missing IMEI or Corrupt Baseband on Infinix Note 7 Lite X656 After Flashing?
A missing or unknown IMEI frequently occurs after MediaTek flashes. This happens because the NVRAM partition, which stores your IMEI and calibration data, may not survive the flash intact. It looks alarming, but it is fixable:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, IMEI repair tools will not detect your device. This step is often overlooked.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option to try, it works on most MTK devices. Maui Meta is the alternative if SN Write fails. Learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, the numbers you saved before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be restored. If they still show null, repeat the process, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Frequently Asked Questions
Q1: Is this firmware compatible with other Infinix models?
A: No. This firmware is built specifically for the Infinix Note 7 Lite X656 running on the MediaTek MT6765 chipset. Even variants of the Note 7 Lite with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q2: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 10, XOS 6.0 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q3: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
Q4: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q5: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q7: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q8: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Infinix support if you are concerned.
People Also Ask About Infinix Note 7 Lite X656
Will flashing firmware on Infinix Note 7 Lite X656 erase my data?
Yes. Flashing stock firmware on the Infinix Note 7 Lite X656 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Can flashing firmware fix a bricked Infinix Note 7 Lite X656?
Yes. If your Infinix Note 7 Lite X656 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.
What is the latest firmware version for Infinix Note 7 Lite X656?
The latest available Infinix Note 7 Lite X656 firmware on this page is version V386. This page has 9 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
What chipset does the Infinix Note 7 Lite X656 use?
The Infinix Note 7 Lite X656 uses the MediaTek MT6765 chipset. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which differs from Qualcomm (QFIL) or Samsung (Odin) methods.
Summary
Your Infinix Note 7 Lite X656 should now be running V386 on a clean build. If the first boot takes a while, do not worry, that is completely normal after a fresh flash.
Ran into something unexpected? Leave a comment and describe what happened. Include which step you were on and what error you saw. I will get back to you.
Consider sharing this guide with anyone else who has an Infinix device that needs fixing.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
