Last Updated: August 9, 2026
The Infinix Hot 10s NFC X689D firmware is the specific software package needed to restore this device to its factory condition. You can download the official stock ROM and use the instructions below to fix bootloops, FRP locks, or unresponsiveness.
Device: Infinix Hot 10s NFC X689D | Chipset: MediaTek Helio G85 (MT6769Z) | Flash Tool: SP Flash Tool
Android: Android 11, XOS 7.6 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Hot 10s NFC X689D (MediaTek Helio G85 (MT6769Z))
Flash Tool: SP Flash Tool
Latest Build: V202
Firmware Files: 2 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Hot 10s NFC X689D Firmware (Flash File) Drivers, Tools & Guide
The Infinix Hot 10s NFC X689D firmware is the official software package required to restore your device to its factory state.
I see these phones come in often with the same issues: stuck on the logo, FRP lock problems, or bootloops. This guide provides everything you need to get them running again. I have put the firmware, tools, and the exact process in one place.
One thing I always recommend before you start: extract the firmware to a simple folder path, like C:FirmwareX689D. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. It is a small detail, but it saves a few minutes of frustration wondering why the tool is not loading the file.
The Infinix Hot 10s NFC X689D runs on a MediaTek Helio G85 (MT6769Z) chipset, which means you will use SP Flash Tool and VCOM/MTK drivers for flashing. These are included in the prerequisites below. The stock firmware ships with Android 11, XOS 7.6, which determines the default apps, security features, and interface you will see after flashing. There are 2 firmware files available for the Infinix Hot 10s NFC X689D on this page. Pick the one that matches your current Android version for the smoothest flash.
This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page. As a Transsion Holdings brand, Infinix devices share similar chipset architectures and flashing procedures across the Hot 10s NFC lineup.
Your Infinix Hot 10s NFC X689D firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
Flashing replaces your current software completely and wipes all personal data. This is by design, it is what clears out FRP locks, bootloops, pattern locks, app crashes, and other software-level problems that a regular reset cannot fix.
Factory Reset Infinix Hot 10s NFC X689D Without a PC
To perform a factory reset on the Infinix Hot 10s NFC X689D without using a computer, you must use the recovery menu.
Power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Infinix Hot 10s NFC X689D to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
Infinix Hot 10s NFC X689D FRP Bypass
The fastest method to bypass the Google account lock on the Infinix Hot 10s NFC X689D involves using a third-party app launcher during the setup process.
After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Why Do We Need Infinix Hot 10s NFC X689D Firmware?
The Infinix Hot 10s NFC X689D firmware is necessary to resolve software corruption and hardware-level boot failures on this specific device.
- Recover your device when it only boots into recovery mode.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Remove persistent malware or adware that survives a factory reset.
- Fix startup loops, lagging, and freezing on your device.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Update to the latest Android version supported by your phone.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Which Firmware Version Does Your Infinix Hot 10s NFC X689D Need?
Selecting the correct firmware version for the Infinix Hot 10s NFC X689D is critical to avoid flashing errors and permanent damage.
- Check About Phone: Open Settings and find your exact model number. It should read “X689D”, not a similar name, the exact code.
- Match the Chipset: This firmware is built for MediaTek Helio G85 (MT6769Z). If your device has a different processor, it will not flash correctly.
- Look at the Build Number: The build string in your current software should reference the Hot 10s NFC line. Cross-check it with the firmware table below.
- Check Recovery Mode: Power off, hold Volume Up + Power until recovery appears. The screen displays your chipset and current build, use this to confirm.
- Compare File Details: Make sure the version listed in the download table matches what you expect for your device and region.
Firmware Details for Infinix Hot 10s NFC X689D
The official specifications for the Infinix Hot 10s NFC X689D firmware are listed below for your reference.
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Hot 10s NFC X689D |
| Firmware Version | V202 |
| File Size | 3 GB to 3.1 GB |
| Android Version | Android 11, XOS 7.6 |
| Platform | MediaTek Helio G85 (MT6769Z) |
| Release Date | Released 2021, May 12 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
To determine the right firmware file, match your current situation with the recommendations in the table below.
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V202, download this one. It is the latest Infinix Hot 10s NFC X689D firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V202 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V202 failed with a flash error | Try the next older version instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V202, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Infinix Hot 10s NFC X689D Firmware
The latest official firmware package for the Infinix Hot 10s NFC X689D is available for download below.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Hot_10S_NFC_MT6768_V202_210524.zip Size: 3 GB | Download Link | Download Link2 |
| File Name: X689D-H696ApAr-R-OP-210524V202.zip Size: 3.1 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Hot 10s NFC X689D (X689D) should not be confused with other Hot 10s NFC variants that may have different chipsets or regional firmware. Even devices in the same Hot 10s NFC line can use completely different processors. Always verify your exact model code “X689D” in Settings > About Phone before downloading any firmware from this page.
- Confirm your exact model is X689D, check About Phone, not the marketing name on the box.
- Your device must have a MediaTek Helio G85 (MT6769Z) chipset. Boot into recovery mode to verify if unsure.
- Only use files downloaded from this page. Third-party mirrors may serve modified or incomplete packages.
- Compare the file size against the download table. If it does not match, the download is likely corrupt or incomplete.
Before You Start: Infinix Hot 10s NFC X689D Requirements
Do not skip this section. Most failed Infinix flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Infinix Hot 10s NFC X689D and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Step-by-Step: Flash Infinix Hot 10s NFC X689D Stock ROM
To flash the stock ROM on the Infinix Hot 10s NFC X689D, you must use SP Flash Tool and follow these specific steps.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Hit the “Download” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
After Flashing: What Happens Next on Infinix Hot 10s NFC X689D
After a successful flash, the Infinix Hot 10s NFC X689D will reboot into the initial setup wizard.
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
Infinix Hot 10s NFC X689D Flashing Problems and Fixes
- Infinix Hot 10s NFC X689D Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X689D, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
Missing IMEI or Corrupt Baseband on Infinix Hot 10s NFC X689D After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Infinix Hot 10s NFC X689D Flashing FAQ
The frequently asked questions about flashing the Infinix Hot 10s NFC X689D are answered below.
Q1: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Infinix support if you are concerned.
Q2: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q3: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q4: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q5: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q6: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q7: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q8: Is this firmware compatible with other Infinix models?
A: No. This firmware is built specifically for the Infinix Hot 10s NFC X689D running on the MediaTek Helio G85 (MT6769Z) chipset. Even variants of the Hot 10s NFC with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
People Also Ask About Infinix Hot 10s NFC X689D
What is the latest firmware version for Infinix Hot 10s NFC X689D?
The latest available Infinix Hot 10s NFC X689D firmware on this page is version V202. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
How do I check my Infinix Hot 10s NFC X689D model number before flashing?
Go to Settings > About Phone on your Infinix Hot 10s NFC X689D and look for the model number “X689D”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Infinix Hot 10s NFC X689D?
Yes. If your Infinix Hot 10s NFC X689D is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.
Will flashing firmware on Infinix Hot 10s NFC X689D erase my data?
Yes. Flashing stock firmware on the Infinix Hot 10s NFC X689D with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Infinix Hot 10s NFC X689D Firmware, Final Notes
You have successfully installed the firmware for the Infinix Hot 10s NFC X689D and the device should now be functional.
Questions, errors, or something not covered here? The comments section is open. Tell me exactly what happened and I will walk you through the fix.
If you found this useful, a quick share goes a long way, someone else with the same device is probably searching for this right now.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
