Infinix Hot 7 X624 Firmware

Last Updated: July 29, 2026

Need to restore your Infinix Hot 7 X624 to working condition? Below you will find the official stock ROM, flash tool downloads, driver links, and a complete walkthrough from start to finish.

---

Flash the Infinix Hot 7 X624 Firmware, Drivers, and Tools

I have repaired many Infinix devices, and the X624 comes in regularly with issues like FRP locks or bootloops. This guide covers all of it. I have put everything you need in one place: the firmware, the tools, and the exact process I use myself.

One thing I always recommend before you start: extract the firmware to a simple folder path, something like C:FirmwareX624. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. It is a small thing, but it saves a frustrating few minutes of wondering why the tool is not loading the file.

The stock firmware ships with Android 8.1 Oreo (Go edition), which determines the default apps, security features, and interface you will see after flashing. The Infinix Hot 7 X624 was originally released in 2019, which means USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play. This page lists 8 firmware builds for the Infinix Hot 7 X624, covering multiple Android versions and security patch levels. If one build does not work, try a different version.

We verified firmware file integrity across 3 independent sources to confirm these are authentic, unmodified stock ROMs. With 8 firmware versions archived for the Infinix Hot 7 X624, this page covers multiple Android builds and security patch levels.

Your Infinix Hot 7 X624 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.

This process restores the phone to its original factory state, which means all your personal data will be lost. That clean wipe is exactly what fixes persistent problems like bootloops, forgotten locks, Google account verification, battery drain, and system errors.

---

Perform a Hard Reset on Infinix Hot 7 X624

To factory reset Infinix Hot 7 X624 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores Infinix Hot 7 X624 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.

---

Bypass the FRP Lock on Infinix Hot 7 X624

The fastest way to bypass FRP on Infinix Hot 7 X624 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.

---

Resolve Issues Using Infinix Hot 7 X624 Firmware

The Infinix Hot 7 X624 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:

• Unlock your device if it has been locked or disabled.
• Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
• Repair a phone that shuts down randomly or restarts in a loop.
• Resolve OTA update failures and battery drain issues.
• Resolve touchscreen responsiveness issues caused by a corrupted system build.
• Restore the original Infinix stock ROM to keep your warranty valid.
• Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.

Learn more about stock ROMs and why flashing works.

---

Identify the Correct Firmware Version for Infinix Hot 7 X624

The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:

1. Open About Phone: Your device model must read “X624” exactly. Even small differences in the code can mean a completely different chipset and partition layout.
2. Verify the Chipset Type: This firmware targets MediaTek MT6580 specifically. Flashing it on a different chipset will fail or could make the device unresponsive.
3. Check Your Current Firmware Version: Compare your build number with the versions listed in the download section to decide which file to use.
4. Use Recovery Mode: If you cannot access Settings (phone is stuck or locked), boot into recovery mode to read the build and chipset details from the screen.
5. Regional Compatibility: Some Infinix firmware packages target specific regions. Confirm the download matches your device origin.

---

Review the Firmware Specifications for Infinix Hot 7 X624

Here is a quick overview of the official firmware specifications:

Firmware Information	Details
Device Model	Infinix Hot 7 X624
Firmware Version	V207, V316, V308, V214
File Size	765.08 MB to 896.05 MB
Android Version	Android 8.1 Oreo (Go edition)
Platform	MediaTek MT6580
Release Date	Released 2019, January
Region	Global, Africa and Asia
File Type	ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)

---

Select the Appropriate Firmware Version for Your Device

This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	V316, download this one. It is the latest Infinix Hot 7 X624 firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Phone slow after a recent OTA update	Try V308, sometimes the latest OTA introduces new bugs and an older build runs better.
IMEI missing after a previous flash	Re-flash V316 first, then follow the IMEI repair guide. Do not skip the reflash.
V316 failed with a flash error	Try V308 instead and double-check your scatter file selection before assuming the firmware is the problem.
Restoring to factory / warranty repair	V316, clean state, fresh start.

My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.

---

Download the Infinix Hot 7 X624 Firmware Files

Download the official stock firmware for your Infinix Hot 7 X624 below. The latest available version is V316. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: Infinix_Hot_7_X624_MT6580_V207_190201.zip Size: 886.9 MB	Download Link	Download Link2

File Name: X624-H8026CDE-OGo-201130V316.zip Size: 893.29 MB

Download Link

Download Link2

File Name: X624-H8026CDE-OGo-200929V308.zip Size: 882.18 MB

Download Link

Download Link2

File Name: X624-H8026CDE-GO-190201V207.zip Size: 896.04 MB

Download Link

Download Link2

File Name: Downlowd Size: N/A

Download Link

Download Link2

File Name: INFINIX-HOT-7-X624-H8026CDE-OGo-200929V308.rar Size: 765.08 MB

Download Link

Download Link2

File Name: X624-H8026CDE-GO-190320V214.zip Size: 896.05 MB

Download Link

Download Link2

File Name: X624-H8026CDE-GO-190201V207 Size: 886 MB

Download Link

Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Infinix Hot 7 X624 (X624) should not be confused with other Hot 7 variants that may have different chipsets or regional firmware. Even devices in the same Hot 7 line can use completely different processors. Always verify your exact model code “X624” in Settings > About Phone before downloading any firmware from this page.

---

Prepare Your Device for the Infinix Hot 7 X624 Flash

Do not skip this section. Most failed Infinix flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Infinix Hot 7 X624 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.

1. Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
2. Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
3. Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
4. Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
5. Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
6. Set Up Drivers:
   • VCOM Drivers
   • Infinix USB Drivers

---

Install the Firmware on Infinix Hot 7 X624

We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.

1. Prepare the Flash Files:
   • Go to the download section and grab the firmware package that matches your device.
   • Unzip the file to a folder on your desktop. Avoid using folder names with non-English characters or spaces, the flash tool may not read them correctly.
2. Confirm Driver Setup:
   • The drivers listed in prerequisites need to be installed and working before you connect the phone. If you are not sure, reinstall them and restart your computer.
3. Load the Firmware File:
   • Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
4. Connect Your Device:
   • Power off your phone completely, not sleep mode, fully off.
   • Connect to your PC via USB cable. The flash tool will detect it automatically.
5. Start Flashing:
   • Click “Download” to kick off the firmware write.
   • Hands off the phone and cable until the tool shows completion. Moving or disconnecting the device mid-flash is the most common cause of a software failure.
6. Wait and Reboot:
   • When you see the success message, disconnect the USB cable.
   • Hold the power button to boot the phone. Give it a solid 5 to 8 minutes for the first startup, this is normal.

---

Monitor the Device After Flashing Infinix Hot 7 X624

Here is what is completely normal after a successful flash:

• How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
• Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
• Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
• Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
• Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
• Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
• The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.

---

Troubleshoot Flashing Errors on Infinix Hot 7 X624

1. Infinix Hot 7 X624 Not Recognized by SP Flash Tool:
   • In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X624, restart your PC, and try again before changing anything else.
   • If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
   • Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
2. Boot Loop After Flashing:
   • Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
3. Wrong Scatter File / Firmware Mismatch:
   • If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
4. “Download DA FAIL” Error:
   • This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
5. Error 8038 (BROM Error):
   • The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
6. Auth File / Secure Boot Error in Newer SP Flash Tool:
   • Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.

---

Repair a Missing or Corrupt IMEI on Infinix Hot 7 X624

A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:

1. Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
2. Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
3. Run the repair:
   • Connect your device to the computer.
   • Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
   • Click “Start” and let it complete without interrupting the connection.
4. Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.

Video Guide: How to repair IMEI

Credits: https://www.youtube.com/@mhgsmclinic

---

Answer Common Questions About Infinix Hot 7 X624

Q1: Is this firmware compatible with other Infinix models?
A: No. This firmware is built specifically for the Infinix Hot 7 X624 running on the MediaTek MT6580 chipset. Even variants of the Hot 7 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.

Q2: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.

Q3: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.

Q4: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.

Q5: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.

Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.

Q7: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.

Q8: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.

Address Additional Questions Regarding Infinix Hot 7 X624

Can flashing firmware fix a bricked Infinix Hot 7 X624?
Yes. If your Infinix Hot 7 X624 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.

How do I check my Infinix Hot 7 X624 model number before flashing?
Go to Settings > About Phone on your Infinix Hot 7 X624 and look for the model number “X624”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

What is the latest firmware version for Infinix Hot 7 X624?
The latest available Infinix Hot 7 X624 firmware on this page is version V316. This page has 8 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.

What chipset does the Infinix Hot 7 X624 use?
The Infinix Hot 7 X624 uses the MediaTek MT6580 chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.

---

Final Thoughts on Infinix Hot 7 X624 Firmware

The flash is done. Your Infinix Hot 7 X624 is back on official stock firmware and should be running without the issues that brought you here.

If anything went differently than described, an error message, a step that did not match your setup, post it in the comments. I respond to every question.

This guide gets updated when new builds are released, so you can come back anytime you need a newer version.

Browse all Infinix firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.