Last Updated: May 8, 2026
Resolve software issues on your LC8 Spark Power 2 with the official Tecno Spark Power 2 LC8 firmware. This page contains everything needed for hard resets, FRP bypass, IMEI repair, and full flashing, tools, drivers, and exact steps included.
Device: Tecno Spark Power 2 LC8 | Chipset: MediaTek MT6765 Helio P35 | Flash Tool: SP Flash Tool
Android: Android 10, HIOS 6.1 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Tecno Spark Power 2 LC8 Firmware (Flash File) Drivers, Tools & Guide
The Tecno Spark Power 2 LC8 firmware resolves software issues like bootloops, FRP locks, and logo-stuck screens. This guide provides stock firmware, tools, and step-by-step instructions for flashing.
Before starting, extract firmware to a simple folder path like C:FirmwareLC8. SP Flash Tool may fail to detect the scatter file if the path contains spaces or special characters, this small precaution saves troubleshooting time later.
Download the Tecno Spark Power 2 LC8 firmware as a compressed ZIP file. Use WinRAR or 7-Zip to extract it. Verify the scatter file exists in the extracted folder before proceeding.
Flashing stock firmware erases all data, this resolves software issues including FRP locks, app crashes, forgotten patterns, Wi-Fi/Bluetooth problems, battery drain, and soft bricks.
Hard Reset Tecno Spark Power 2 LC8
To factory reset Tecno Spark Power 2 LC8 without a computer, power off the device, then hold Volume Up and Power simultaneously until the recovery menu appears. Navigate to “Wipe Data/Factory Reset” using volume keys and confirm with Power.
A hard reset clears all data and restores Tecno Spark Power 2 LC8 to factory settings. This fixes software issues like slow performance, app crashes, forgotten screen locks, and bootloops. If problems persist, use SP Flash Tool for a full firmware flash.
Tecno Spark Power 2 LC8 FRP Bypass
The fastest way to bypass FRP on Tecno Spark Power 2 LC8 is using our free Android apps launcher to access settings during setup. This method works after flashing or factory resets when a Google account lock appears. Always remove your Google account before flashing to avoid FRP entirely.
Why Do We Need Tecno Spark Power 2 LC8 Firmware?
The Tecno Spark Power 2 LC8 uses a MediaTek chipset, making SP Flash Tool the standard firmware recovery method. Stock firmware fixes these issues:
- Unlock disabled or locked devices
- Update to the latest supported Android version
- Fix boot loops, lagging, and freezing
- Resolve OTA update failures and battery drain
- Restore original stock ROM for warranty validity
- Recover devices stuck in recovery mode
- Fix “Download DA FAIL” errors and Secure Boot issues on MediaTek MT6765 Helio P35
Learn more about stock ROMs and flashing benefits.
Choosing the Right Firmware Version
Confirm you have the correct firmware before flashing. Using the wrong file is difficult to recover from:
- Verify Device Model: Check Settings › About Phone to confirm your model is Tecno Spark Power 2 LC8.
- Check Build Number: Ensure “LC8” appears in the build details.
- Confirm Chipset: The Spark Power 2 LC8 uses MediaTek MT6765 Helio P35.
- Match Firmware Version: Compare version and regional details with the download table.
- Use Recovery Mode: If uncertain, boot into recovery mode, this reliably displays chipset and build info.
Firmware Details for Tecno Spark Power 2 LC8
Official Tecno Spark Power 2 LC8 firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Spark Power 2 LC8 |
| Firmware Version | V283, V350, V345, V331, V327, V321, V316, V310, V305, V298, V290, V276, V254 |
| File Size | 1.9 GB to 2.39 GB |
| Android Version | Android 10, HIOS 6.1 |
| Platform | MediaTek MT6765 Helio P35 |
| Release Date | Released 2020, June 23 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
Find your situation in this table to select the right firmware:
| Your Situation | What I Recommend |
|---|---|
| Phone is dead or stuck on logo | V350, the latest Tecno Spark Power 2 LC8 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide, full firmware usually not needed. |
| Phone slow after OTA update | Try V345, latest OTA builds may have bugs; older versions run better. |
| IMEI missing after previous flash | Re-flash V350, then follow the IMEI repair guide. Do not skip reflash. |
| V350 failed with flash error | Try V345 and verify scatter file selection before blaming firmware. |
| Restoring to factory/warranty repair | V350, provides a clean, fresh installation. |
General approach for MTK devices: always try the latest version first. Many users waste time with older builds when the newest firmware would work. Only use older versions if the latest fails repeatedly, and confirm it’s a driver issue, not firmware.
Download Tecno Spark Power 2 LC8 Firmware
Download the official stock firmware for Tecno Spark Power 2 LC8 below. The latest version is V350. After downloading, verify file sizes match the table, mismatches indicate corrupt downloads, which cause more problems.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Spark_Power_2_LC8_MT6765_V283_200525.zip Size: 2.3 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-220402V350.zip Size: 2.33 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-220215V345.zip Size: 2.33 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-210608V331.zip Size: 2.33 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-210416V327.zip Size: 2.33 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-210127V321.zip Size: 2.34 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-201218V316+.zip Size: 2.39 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-201028V310.zip Size: 2.38 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-200922V305.zip Size: 2.37 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-200820V298.zip Size: 2.35 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-200702V290.zip Size: 2.35 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-200525V283.zip Size: 2.32 GB | Download Link | Download Link2 |
| File Name: LC8-H6215ABCD-Q-GL-210608V331.zip Size: 2.3 GB | Download Link | Download Link2 |
| File Name: ROM LC8-H6215ABCD-Q-GL-200922V321 Size: N/A | Download Link | Download Link2 |
| File Name: TECNO-SPARK-POWER-2-LC8-H6215ABCD-Q-GL-220402V350-Flash-File.zip Size: 2.33 GB | Download Link | Download Link2 |
| File Name: Tecno Pouvoir 4 Pro (LC8-H6215ABCD-Q-GL-200702V290).7z Size: 1.9 GB | Download Link | Download Link2 |
| File Name: Tecno Pouvoir 4 Pro (LC8-H6215ABCD-Q-GL-200525V283) [Factory / Signed] Size: N/A | Download Link | Download Link2 |
| File Name: Tecno Pouvoir 4 Pro (LC8-H6215ABCD-Q-GL-200509V276) [Factory / Signed] Size: N/A | Download Link | Download Link2 |
| File Name: Tecno Pouvoir 4 Pro (LC8-H6215ABCD-Q-200407V254) [Factory / Signed] Size: N/A | Download Link | Download Link2 |
Only download firmware compatible with your exact device model. See the firmware selection guide above if unsure.
- Your model number is a variant of LC8 with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from MediaTek MT6765 Helio P35. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Tecno Spark Power 2 LC8 Firmware
Do not skip preparation steps. Most failed Tecno flashes occur from rushing through prerequisites. The VCOM driver installation is essential for the Tecno Spark Power 2 LC8 and other MediaTek devices. Even if Windows shows the device in Device Manager, SP Flash Tool will not detect it without the correct VCOM driver.
- Back Up IMEI Numbers: Dial *#06# and record both IMEI numbers now. You will need these for IMEI repair after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up photos, contacts, WhatsApp chats, and important files. Flashing wipes the device completely.
- Charge Your Device: Maintain at least 50% battery. A device powering off during flash is difficult to recover.
- USB Cable & PC: Use a data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
How to Install Firmware on Tecno Spark Power 2 LC8
We use SP Flash Tool for this process. For older devices, start with SP Flash Tool v5.1924. Newer SP Flash Tool versions require a DA (Download Agent) file that older firmware packages lack, causing “Auth” errors. If SP Flash Tool requests an auth file you do not have, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux. The complete SP Flash Tool guide provides additional details.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and your PC has been restarted since installation. Skipping restarts causes driver failures.
- Load the Firmware File:
- Click “Scatter-loading” and select the “scatter.txt” file from your extracted firmware folder.
- Connect Your Device:
- Power off your phone completely, not sleep mode.
- Connect to your PC via USB cable. The flash tool detects it automatically.
- Start Flashing:
- Click “Download” to begin.
- Do not disconnect, move the cable, or touch the device until the process completes fully. Disconnecting mid-flash bricks devices.
- Wait and Reboot:
- Once flashing finishes, disconnect the device.
- Power on your device. The first boot takes up to 8 minutes, do not force-reboot.
What to Expect After Flashing Tecno Spark Power 2 LC8 Firmware
Post-flash behaviors that appear problematic but are actually normal for Tecno Spark Power 2 LC8:
- Successful flash indicator: SP Flash Tool shows a green circle or checkmark upon completion.
- First boot duration: Takes 3-8 minutes, do not interrupt this. The OS is setting up from scratch.
- Device warmth: The phone may feel warm during first boot, this normalizes after initial setup.
- App removal: All apps are erased, reinstall from Play Store. Google account backup restores apps automatically during setup if active.
- IMEI verification: Dial *#06# immediately after setup. If it shows “unknown” or “null”, follow the IMEI repair guide before using the device.
- Google account caution: Re-add your Google account during setup wizard only, adding it later via Settings triggers FRP.
- Connectivity checks: Wi-Fi, Bluetooth, and mobile data should work post-setup. If mobile data fails, manually re-enter APN in Settings › SIM and Network.
- Post-flash bootloops: Enter recovery mode and perform a factory reset, see hard reset guide above. This resolves conflicts with leftover data.
- HiOS/XOS apps: After flashing Tecno Spark Power 2 LC8 firmware, pre-installed apps appear. Disable them in Settings › Apps if unwanted, do not force-remove with ADB as some tie to system services.
Missing IMEI or Corrupt Baseband on Tecno Spark Power 2 LC8 After Flashing?
A missing or unknown IMEI commonly occurs after MediaTek flashes. The NVRAM partition storing IMEI and calibration data may not survive the flash intact. This is fixable:
- Check drivers first: Install the Mediatek CDC Driver if not already, IMEI repair tools require it for detection. This step is often missed.
- Use SN Write Tool or Maui Meta: SN Write Tool works on most MTK devices. Maui Meta is an alternative if SN Write fails. Learn how to use SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, recorded before flashing.
- Click “Start” and complete without interrupting the connection.
- Verify after reboot: Reboot the phone and dial *#06#. IMEI numbers should return. If still null, repeat the process, first attempts sometimes fail.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Common Issues When Flashing Tecno Spark Power 2 LC8
- Tecno Spark Power 2 LC8 Not Recognized by SP Flash Tool:
- Reinstall VCOM drivers for the LC8, restart your PC, and retry before changing cables or ports.
- Switch to a USB 2.0 port, USB 3. ports frequently cause detection issues with MediaTek devices.
- Temporarily disable antivirus, it can block VCOM driver loading without error messages.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset. Most post-flash bootloops stem from cached data conflicts.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool errors at download start, verify the scatter file first. Scatter file mismatches are common flash error causes.
- “Download DA FAIL” Error:
- Reinstall VCOM drivers, restart your PC, and retry. If unresolved, try SP Flash Tool v5.1924, older devices respond better to this version.
- Error 8038 (BROM Error):
- Power off completely and remove the battery for 30 seconds if possible. Reconnect and retry. Some MediaTek devices require holding Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer SP Flash Tool versions require a DA authentication file for Secure Boot enabled devices. Use MTK Client instead, it handles Secure Boot automatically.
Frequently Asked Questions
Q1: Will flashing the Tecno Spark Power 2 LC8 firmware erase my data?
A: Yes, flashing this firmware with SP Flash Tool restores your device to factory state, including Android 10, HIOS 6.1 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything before starting. Data cannot be recovered after flashing completes.
Q2: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Spark Power 2 LC8 running on MediaTek MT6765 Helio P35. Even a variant like LC8 with a different letter suffix may have a different chipset. Flashing incorrect firmware can leave your phone unrecoverable. Always verify your exact model number in Settings › About Phone.
Q3: Can I downgrade from V350 to an older firmware version?
A: Possible on some MediaTek builds but not recommended. Downgrading causes security issues and app compatibility problems on Android 10, HIOS 6.1. If V350 fails, comment below, better solutions exist than downgrading.
Q4: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. Always remove your Google account before flashing to avoid this issue.
Q5: Are custom ROM options available for the Tecno Spark Power 2 LC8?
A: This guide covers official Tecno stock firmware only. Custom ROM availability depends on whether the MediaTek MT6765 Helio P35 chipset has open-source kernel support. Check our Custom ROMs page or XDA Developers forum for device-specific custom ROM threads.
Q6: My Tecno Spark Power 2 LC8 is not detected by SP Flash Tool. What should I do?
A: Start with drivers, reinstall VCOM drivers, restart your PC, and retry. Switch to a USB 2.0 port if using USB 3. Disable antivirus temporarily. If these steps fail, comment below with the exact error message for further assistance.
Q7: How do I enter recovery mode on my Tecno Spark Power 2 LC8?
A: Power off completely, then hold Volume Up + Power simultaneously until the recovery menu appears. The recovery menu displays the build number for your Tecno Spark Power 2 LC8, use this to verify firmware version before flashing.
Q8: My IMEI shows “unknown” after flashing the Tecno Spark Power 2 LC8. Is my phone permanently damaged?
A: No, this is fixable. Follow the IMEI repair guide. Use SN Write Tool or Maui Meta for MediaTek devices. Do not insert a SIM card until IMEI is restored.
Q9: How long does it take to flash Tecno Spark Power 2 LC8 firmware?
A> Actual flashing takes 3-10 minutes depending on file size and USB speed. First boot after flashing takes 3-8 minutes. Do not interrupt either stage. If SP Flash Tool progress appears stuck, wait several minutes before assuming failure.
Final Thoughts on Tecno Spark Power 2 LC8 Firmware
This guide provides everything needed to safely flash official Tecno Spark Power 2 LC8 firmware (V350) using SP Flash Tool. Following each step should restore your device to a clean working state.
If issues arise, specific errors, steps that fail, comment below with details: error messages, current step, and attempted solutions. I read every comment and will assist.
If this guide helped, share it, it helps others with the same Tecno Spark Power 2 LC8 firmware issues.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow instructions carefully. I cannot be held responsible for device damage, but I will assist if problems occur.
