Tecno Spark 4 KC8 Firmware

Last Updated: July 13, 2026

If your Tecno Spark 4 KC8 is stuck on a logo, locked out, or not responding, this guide walks you through the full recovery process with official firmware, the right flash tool, and clear instructions.

---

Tecno Spark 4 KC8 Firmware (Flash File) Drivers, Tools & Guide

I repair Tecno phones frequently, and the Spark 4 KC8 comes in often with FRP locks, bootloops, or stuck logos. This guide covers the process. I have put everything you need in one place: the firmware, the tools, and the exact steps I use myself.

One thing I always recommend before you start: extract the firmware to a simple folder path, something like C:FirmwareKC8. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. It is a small thing, but it saves a frustrating few minutes of wondering why the tool is not loading the file.

The Tecno Spark 4 KC8 runs on a MediaTek MT6761 Helio A22 chipset, which means you will use SP Flash Tool and VCOM/MTK drivers for flashing. These are included in the prerequisites below. The stock firmware ships with Android 9.0 (Pie), HIOS 5.5, which determines the default apps, security features, and interface you will see after flashing. The Tecno Spark 4 KC8 was originally released in 2019, which means USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play.

This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page. With 4 firmware versions archived for the Tecno Spark 4 KC8, this page covers multiple Android builds and security patch levels.

Your Tecno Spark 4 KC8 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.

Be aware that flashing overwrites the entire software partition. Your data, apps, and accounts will all be removed. This full wipe is how the flash resolves deep software issues, anything from FRP locks and boot failures to Wi-Fi problems and app crashes.

---

Remove FRP Lock on Tecno Spark 4 KC8

To bypass the Google account lock on the Tecno Spark 4 KC8, use an Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.

---

Hard Reset Tecno Spark 4 KC8

To factory reset Tecno Spark 4 KC8 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores Tecno Spark 4 KC8 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.

---

Tecno Spark 4 KC8 Firmware Compatibility Check

The most common mistake is flashing firmware meant for a different variant, so verify your exact device identity before downloading.

1. Verify Your Exact Model: In Settings, look for the model code “KC8”. Some Tecno phones share the same marketing name but have different internal hardware.
2. Confirm the Processor: This build targets the MediaTek MT6761 Helio A22 chipset. You can check your chipset via recovery mode or a hardware info app.
3. Review the Version Number: The firmware version in the download table should be close to or newer than what your device is currently running.
4. Use Recovery Mode as a Safety Check: Before flashing, boot into recovery to see the current build number and chipset printed on screen. This is the most trustworthy check.
5. Verify the Region: Some firmware builds are region-specific. Confirm the download matches your device region or is listed as global.

---

Why Flash Stock ROM on Tecno Spark 4 KC8?

Since the Tecno Spark 4 KC8 uses a MediaTek chipset, SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:

• Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
• Resolve OTA update failures and battery drain issues.
• Restore the original Tecno stock ROM to keep your warranty valid.
• Unlock your device if it has been locked or disabled.
• Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
• Resolve touchscreen responsiveness issues caused by a corrupted system build.
• Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.

Learn more about stock ROMs and why flashing works.

---

Firmware Details for Tecno Spark 4 KC8

Here is a quick overview of the official firmware specifications:

Firmware Information	Details
Device Model	Tecno Spark 4 KC8
Firmware Version	V111, V261, V228
File Size	1.82 GB to 1.94 GB
Android Version	Android 9.0 (Pie), HIOS 5.5
Platform	MediaTek MT6761 Helio A22
Release Date	Released 2019, September 25
Region	Global, Africa and Asia
File Type	ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)

---

Which Firmware Version Should I Download?

Use this table to find the correct file for your specific situation.

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	V261, download this one. It is the latest Tecno Spark 4 KC8 firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Phone slow after a recent OTA update	Try V228, sometimes the latest OTA introduces new bugs and an older build runs better.
IMEI missing after a previous flash	Re-flash V261 first, then follow the IMEI repair guide. Do not skip the reflash.
V261 failed with a flash error	Try V228 instead and double-check your scatter file selection before assuming the firmware is the problem.
Restoring to factory / warranty repair	V261, clean state, fresh start.

My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.

---

Download Tecno Spark 4 KC8 Firmware

Download the official stock firmware for your Tecno Spark 4 KC8 below. The latest available version is V261. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: Tecno_Spark_4_KC8_MT6761_V111_191006.zip Size: 1.82 GB	Download Link	Download Link2

File Name: KC8-H6110LMN-Q-OP-210708V261.zip Size: 1.94 GB

Download Link

Download Link2

File Name: Tecno_Spark_4_KC8_MT6761_V228_210507.zip Size: 1.92 GB

Download Link

Download Link2

File Name: KC8-H6110LMN-P-191006V111.zip Size: 1.84 GB

Download Link

Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Tecno Spark 4 KC8 (KC8) should not be confused with other Spark 4 variants that may have different chipsets or regional firmware. Even devices in the same Spark 4 line can use completely different processors. Always verify your exact model code “KC8” in Settings > About Phone before downloading any firmware from this page.

---

Prepare Your Tecno Spark 4 KC8 for Flashing

Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Spark 4 KC8 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.

1. IMEI Backup: Open the dialer and enter *#06#. Write both IMEI numbers down on paper or take a screenshot. If you ever need to repair your IMEI after flashing, these are essential.
2. Remove All Google Accounts: Go to Settings, Accounts, and sign out of every Google account on the device. Leaving accounts signed in triggers FRP lock after a flash, which blocks you from setting up the phone.
3. Backup Everything: Photos, contacts, messages, WhatsApp data, move it all to a computer or cloud service. The flash will restore the phone to factory state with nothing on it.
4. 50% Battery Minimum: Do not start with a low battery. If power cuts out during the flash, the device can become unresponsive and much harder to fix.
5. USB Cable and Computer: Use a proper data-transfer USB cable and a Windows PC. Avoid USB hubs, connect directly to the motherboard port for a stable connection.
6. Download and Install Drivers:
   • VCOM Drivers
   • Tecno USB Drivers

---

Flashing Tecno Spark 4 KC8 Firmware With SP Flash Tool

We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.

1. Download and Unpack:
   • Pick the correct firmware version from the downloads above and save it to your PC.
   • Extract the ZIP file. If the extracted folder contains another ZIP inside, extract that one too. You should end up with the actual firmware files, not another archive.
2. Driver Check:
   • Double-check that you have installed the required drivers. A missing driver is the most common reason the flash tool cannot detect your phone. Reboot your PC after installing.
3. Load the Firmware File:
   • Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
4. Connect Your Device:
   • Power off your phone completely, not sleep mode, fully off.
   • Connect to your PC via USB cable. The flash tool will detect it automatically.
5. Start Flashing:
   • Start the flash by clicking “Download”.
   • Leave everything untouched until completion. Even bumping the USB cable can interrupt the write and cause a failed flash.
6. Wait and Reboot:
   • The flash is complete when the tool shows a success indicator. Disconnect your phone.
   • Turn the phone on. Do not worry if it sits on the boot logo for several minutes, the system is rebuilding itself from scratch.

---

Common Issues When Flashing Tecno Spark 4 KC8

1. Tecno Spark 4 KC8 Not Recognized by SP Flash Tool:
   • In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the KC8, restart your PC, and try again before changing anything else.
   • If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
   • Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
2. Boot Loop After Flashing:
   • Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
3. Wrong Scatter File / Firmware Mismatch:
   • If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
4. “Download DA FAIL” Error:
   • This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
5. Error 8038 (BROM Error):
   • The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
6. Auth File / Secure Boot Error in Newer SP Flash Tool:
   • Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.

---

After Flashing: What Happens Next on Tecno Spark 4 KC8

Here is what is completely normal after a successful flash:

• How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
• The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
• Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
• All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
• Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
• Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
• Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.

---

Missing IMEI or Corrupt Baseband on Tecno Spark 4 KC8 After Flashing?

A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:

1. Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
2. Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
3. Run the repair:
   • Connect your device to the computer.
   • Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
   • Click “Start” and let it complete without interrupting the connection.
4. Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.

Video Guide: How to repair IMEI

Credits: https://www.youtube.com/@mhgsmclinic

---

Frequently Asked Questions

Q1: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.

Q2: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.

Q3: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.

Q4: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.

Q5: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.

Q6: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.

Q7: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 9.0 (Pie), HIOS 5.5 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.

Q8: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.

People Also Ask About Tecno Spark 4 KC8

What chipset does the Tecno Spark 4 KC8 use?
The Tecno Spark 4 KC8 uses the MediaTek MT6761 Helio A22 chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.

How do I check my Tecno Spark 4 KC8 model number before flashing?
Go to Settings > About Phone on your Tecno Spark 4 KC8 and look for the model number “KC8”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

Will flashing firmware on Tecno Spark 4 KC8 erase my data?
Yes. Flashing stock firmware on the Tecno Spark 4 KC8 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.

What is the latest firmware version for Tecno Spark 4 KC8?
The latest available Tecno Spark 4 KC8 firmware on this page is version V261. This page has 4 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.

---

Wrapping Up: Tecno Spark 4 KC8 Firmware

You have just completed a clean firmware flash on your Tecno Spark 4 KC8. The device should now be back at the setup wizard on a fresh V261 build.

Questions, errors, or something not covered here? The comments section is open. Tell me exactly what happened and I will walk you through the fix.

If you found this useful, a quick share goes a long way, someone else with the same device is probably searching for this right now.

Browse all Tecno firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.