Last Updated: July 14, 2026
You will find everything you need to get your Tecno Camon 30S CLA5 running again. This guide provides the official stock firmware, the necessary tools, and a clear method to fix bootloops, FRP locks, or a phone stuck on the logo.
Device: Tecno Camon 30S CLA5 | Chipset: MediaTek MT6789 Helio G100 | Flash Tool: SP Flash Tool
Android: Android 14, HIOS 14 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Tecno Camon 30S CLA5 (MediaTek MT6789 Helio G100)
Flash Tool: SP Flash Tool
Latest Build: V527
Firmware Files: 2 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Tecno Camon 30S CLA5 Firmware (Flash File) Drivers, Tools & Guide
Tecno devices with the CLA5 model number often arrive in the shop with software issues. I have handled many of these repairs, and they usually involve FRP locks, bootloops, or getting stuck on the Tecno logo. This guide puts all the necessary files in one place so you can fix the problem yourself.
One simple tip I use to avoid errors is extracting the firmware to a folder path without spaces, such as C:FirmwareCLA5. SP Flash Tool can struggle to read the scatter file if the directory name is messy. It is a minor detail, but it saves a lot of time troubleshooting.
The Tecno Camon 30S CLA5 runs on a MediaTek MT6789 Helio G100 chipset (MediaTek), which means you will use SP Flash Tool and VCOM/MTK drivers for flashing. There are two firmware files available for the Tecno Camon 30S CLA5 on this page. You should choose the version that matches your current Android build to ensure the flash goes smoothly. Released in 2024, the Tecno Camon 30S CLA5 has been on the market long enough that multiple firmware builds are available, giving you options if one version causes issues.
Since this is a Transsion Holdings brand, the flashing procedures for the Camon 30S line are quite similar. The Tecno Camon 30S CLA5 was released in 2024. This page is maintained with the latest available firmware builds as they become available.
Your Tecno Camon 30S CLA5 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
Once you flash, the device goes back to factory condition. Everything stored on the phone, photos, messages, apps, will be gone. This clean state is what allows the flash to fix stuck logos, FRP locks, software corruption, and performance issues.
Tecno Camon 30S CLA5 FRP Bypass
The quickest method to bypass the Google account lock on a Tecno Camon 30S CLA5 is to use a free Android apps launcher that permits access to settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Hard Reset Tecno Camon 30S CLA5
To factory reset Tecno Camon 30S CLA5 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Tecno Camon 30S CLA5 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
How to Pick the Correct Tecno Camon 30S CLA5 Firmware
The biggest mistake I see is flashing firmware intended for a different variant. You must verify your exact device identity before downloading anything:
- Identify Your Device Model: Go to About Phone and confirm your model is Tecno Camon 30S CLA5. Check the full model string, not just the name.
- Verify the Build Number: Look for the identifier “CLA5” in your device build details.
- Confirm the Chipset: According to Tecno specifications, the Camon 30S CLA5 runs on MediaTek MT6789 Helio G100.
- Match the Firmware Version: Check the version and regional details against what is listed in the download table above.
- Verify in Recovery Mode: If you are not sure about the chipset or build number, boot into recovery mode, it displays this information clearly and is the most reliable way to confirm before you flash.
Why Do We Need Tecno Camon 30S CLA5 Firmware?
The Tecno Camon 30S CLA5 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Repair a phone that shuts down randomly or restarts in a loop.
- Remove persistent malware or adware that survives a factory reset.
- Restore system apps that were accidentally removed or corrupted.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Resolve OTA update failures and battery drain issues.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Tecno Camon 30S CLA5
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Tecno Camon 30S CLA5 |
| Firmware Version | V527 |
| File Size | 4.4 GB to 5.4 GB |
| Android Version | Android 14, HIOS 14 |
| Platform | MediaTek MT6789 Helio G100 |
| Release Date | Released 2024, October 10 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V527, download this one. It is the latest Tecno Camon 30S CLA5 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V527 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V527 failed with a flash error | Try the next older version instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V527, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Tecno Camon 30S CLA5 Firmware
Download the official stock firmware for your Tecno Camon 30S CLA5 below. The latest available version is V527. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Tecno_Camon_30S_CLA5_MT6789_V527_240821_MXML.zip Size: 4.4 GB | Download Link | Download Link2 |
| File Name: CLA5-H8910GHIJKLMNQRST-U-BASE-240821V527SMT2.zip Size: 5.4 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Tecno Camon 30S CLA5 (CLA5) should not be confused with other Camon 30S variants that may have different chipsets or regional firmware. Even devices in the same Camon 30S line can use completely different processors. Always verify your exact model code “CLA5” in Settings > About Phone before downloading any firmware from this page.
- Open About Phone and make sure the model code reads CLA5. Do not rely on the name printed on the phone case.
- Verify the chipset is MediaTek MT6789 Helio G100. You can see this in recovery mode or by checking the device specifications online.
- Use only the download links provided on this page.
- After downloading, right-click the file and check Properties to confirm the size matches the table above. If it does not, download it again.
Prepare Your Tecno Camon 30S CLA5 for Flashing
Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Camon 30S CLA5 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Record IMEI Before Flashing: Dial *#06# and save both IMEI numbers somewhere safe, a screenshot works. If flashing corrupts the baseband, these numbers are what you will need to restore cellular connectivity.
- Unlink Google Accounts: Go to Settings, then Accounts, and remove all Google accounts. This prevents Factory Reset Protection from activating after the flash. It is the single most skipped step and causes the most post-flash headaches.
- Full Data Backup: Flashing erases everything. Transfer your photos, contacts, app data, and any important files to your computer or cloud backup before starting.
- Charge the Battery: Make sure you have at least 50% charge. A dead battery during a flash can corrupt the system partition and turn a fixable problem into a much bigger one.
- Windows PC and USB Cable: You will need a Windows computer and a data-capable USB cable. Cheap charge-only cables are the number one reason flash tools fail to detect devices.
- Driver Installation:
Install Stock Firmware on Tecno Camon 30S CLA5
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters, as some flash tools have trouble with them.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and that your PC has been restarted since installation. Skipping the restart is a common reason drivers do not work correctly.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Click the “Download” button to begin.
- Do not disconnect, move the cable, or touch the device until the process is fully complete. Disconnecting mid-flash is how devices get bricked.
- Wait and Reboot:
- Once flashing finishes successfully, disconnect the device.
- Power on your device. The first boot will take longer than usual, give it up to 8 minutes.
Fix Common Tecno Camon 30S CLA5 Firmware Errors
- Tecno Camon 30S CLA5 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the CLA5, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
Normal Behavior After Installing Tecno Camon 30S CLA5 Firmware
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
Missing IMEI or Corrupt Baseband on Tecno Camon 30S CLA5 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Common Questions About Flashing Tecno Camon 30S CLA5
Q1: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Camon 30S CLA5 running on the MediaTek MT6789 Helio G100 chipset. Even variants of the Camon 30S with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q2: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q3: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q4: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q5: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q7: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
Q8: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
People Also Ask About Tecno Camon 30S CLA5
What is the latest firmware version for Tecno Camon 30S CLA5?
The latest available Tecno Camon 30S CLA5 firmware on this page is version V527. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
How do I check my Tecno Camon 30S CLA5 model number before flashing?
Go to Settings > About Phone on your Tecno Camon 30S CLA5 and look for the model number “CLA5”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Tecno Camon 30S CLA5?
Yes. If your Tecno Camon 30S CLA5 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.
Will flashing firmware on Tecno Camon 30S CLA5 erase my data?
Yes. Flashing stock firmware on the Tecno Camon 30S CLA5 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Conclusion
That covers the entire flashing process for the Tecno Camon 30S CLA5. With V527 installed, your device should boot cleanly and be ready for setup.
If you ran into an issue that is not covered here, or if one of the steps did not work the way it should, let me know in the comments. Include the error code or screenshot if you have one.
Bookmark this page if you work on Tecno devices regularly. I keep it updated when new firmware versions come out.
Browse all Tecno firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
