Tecno Phantom V Fold2 AE10 Firmware

Last Updated: June 17, 2026

Restoring the Tecno Phantom V Fold2 AE10 to working condition requires the official stock ROM, the correct drivers, and a detailed guide. This page provides the necessary flash files, tools, and step-by-step instructions to resolve bootloops, FRP locks, and other software issues.

---

Tecno Phantom V Fold2 AE10 Firmware (Flash File) Drivers, Tools & Guide

The Tecno Phantom V Fold2 AE10 is a device that frequently arrives in the repair queue with specific issues like bootloops or a stuck logo. This guide consolidates the resources needed to address these problems, including the firmware, tools, and step-by-step process.

One recommendation before starting is to extract the firmware to a simple folder path, such as C:FirmwareAE10. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. This simple step prevents a frustrating few minutes of wondering why the tool is not loading the file.

Two firmware files are available for the Tecno Phantom V Fold2 AE10 on this page. Select the version that matches your current Android version for the smoothest flash. The Tecno Phantom V Fold2 AE10 runs on a MediaTek Dimensity 9000+ (MT6983) chipset (MediaTek), which means you will use SP Flash Tool and VCOM/MTK drivers for flashing. The stock firmware ships with Android 14, HiOS 14 Fold, which determines the default apps, security features, and interface you will see after flashing.

This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page. The Tecno Phantom V Fold2 AE10 was released in 2024. This page is maintained with the latest available firmware builds as they become available.

Your Tecno Phantom V Fold2 AE10 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.

A full flash erases everything on the device: apps, accounts, photos, and settings. This provides a clean slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.

---

Reset Tecno Phantom V Fold2 AE10 From Recovery Mode

To factory reset Tecno Phantom V Fold2 AE10 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores Tecno Phantom V Fold2 AE10 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.

---

Tecno Phantom V Fold2 AE10 FRP Bypass

The fastest way to bypass FRP on Tecno Phantom V Fold2 AE10 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.

---

Why Do We Need Tecno Phantom V Fold2 AE10 Firmware?

The Tecno Phantom V Fold2 AE10 uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:

• Resolve touchscreen responsiveness issues caused by a corrupted system build.
• Remove persistent malware or adware that survives a factory reset.
• Resolve OTA update failures and battery drain issues.
• Update to the latest Android version supported by your phone.
• Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
• Unlock your device if it has been locked or disabled.
• Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.

Learn more about stock ROMs and why flashing works.

---

How to Pick the Correct Tecno Phantom V Fold2 AE10 Firmware

The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:

1. Check About Phone: Open Settings and find your exact model number. It should read “AE10”, not a similar name, the exact code.
2. Match the Chipset: This firmware is built for MediaTek Dimensity 9000+ (MT6983). If your device has a different processor, it will not flash correctly.
3. Look at the Build Number: The build string in your current software should reference the Phantom V Fold2 line. Cross-check it with the firmware table below.
4. Check Recovery Mode: Power off, hold Volume Up + Power until recovery appears. The screen displays your chipset and current build, use this to confirm.
5. Compare File Details: Make sure the version listed in the download table matches what you expect for your device and region.

---

Firmware Details for Tecno Phantom V Fold2 AE10

Here is a quick overview of the official firmware specifications:

Firmware Information	Details
Device Model	Tecno Phantom V Fold2 AE10
Firmware Version	V4031, V4635
File Size	6 GB to 8.2 GB
Android Version	Android 14, HiOS 14 Fold
Platform	MediaTek Dimensity 9000+ (MT6983)
Release Date	Released 2024, October
Region	Global, Africa and Asia
File Type	ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)

---

Which Firmware Version Should I Download?

This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	V4635, download this one. It is the latest Tecno Phantom V Fold2 AE10 firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Phone slow after a recent OTA update	Try V4031, sometimes the latest OTA introduces new bugs and an older build runs better.
IMEI missing after a previous flash	Re-flash V4635 first, then follow the IMEI repair guide. Do not skip the reflash.
V4635 failed with a flash error	Try V4031 instead and double-check your scatter file selection before assuming the firmware is the problem.
Restoring to factory / warranty repair	V4635, clean state, fresh start.

My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.

---

Download Tecno Phantom V Fold2 AE10 Firmware

Download the official stock firmware for your Tecno Phantom V Fold2 AE10 below. The latest available version is V4635. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: Tecno_Phantom_V_Fold_2_5G_AE10_MT6983_RU_V4031_240718_MXML.zip Size: 8.2 GB	Download Link	Download Link2

File Name: AE10-H833AC-U-BASE-240712V4635 Factory Signed Firmware.zip Size: 6 GB

Download Link

Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Tecno Phantom V Fold2 AE10 (AE10) should not be confused with other Phantom V Fold2 variants that may have different chipsets or regional firmware. Even devices in the same Phantom V Fold2 line can use completely different processors. Always verify your exact model code “AE10” in Settings > About Phone before downloading any firmware from this page.

---

Prerequisites for Tecno Phantom V Fold2 AE10 Firmware

Do not skip this section. Most failed Tecno flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Tecno Phantom V Fold2 AE10 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.

1. Record IMEI Before Flashing: Dial *#06# and save both IMEI numbers somewhere safe, a screenshot works. If flashing corrupts the baseband, these numbers are what you will need to restore cellular connectivity.
2. Unlink Google Accounts: Go to Settings, then Accounts, and remove all Google accounts. This prevents Factory Reset Protection from activating after the flash. It is the single most skipped step and causes the most post-flash headaches.
3. Full Data Backup: Flashing erases everything. Transfer your photos, contacts, app data, and any important files to your computer or cloud backup before starting.
4. Charge the Battery: Make sure you have at least 50% charge. A dead battery during a flash can corrupt the system partition and turn a fixable problem into a much bigger one.
5. Windows PC and USB Cable: You will need a Windows computer and a data-capable USB cable. Cheap charge-only cables are the number one reason flash tools fail to detect devices.
6. Driver Installation:
   • VCOM Drivers
   • Tecno USB Drivers

---

How to Install Firmware on Tecno Phantom V Fold2 AE10

We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.

1. Download the Firmware Package:
   • Use the download links in the table above to get the correct firmware file for your device.
   • Extract the archive with WinRAR or 7-Zip. Use a short folder path like D:flash to avoid issues with some tools.
2. Check Drivers:
   • All drivers from the prerequisites must be installed before connecting your device. Restart your computer after installing them.
3. Load the Firmware File:
   • Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
4. Connect Your Device:
   • Power off your phone completely, not sleep mode, fully off.
   • Connect to your PC via USB cable. The flash tool will detect it automatically.
5. Start Flashing:
   • Press “Download” to begin writing the firmware to your device.
   • Do not unplug the phone, close the flash tool, or interact with the device until the process is 100% complete.
6. Wait and Reboot:
   • After the tool confirms the flash is complete, safely disconnect your phone.
   • Press the power button to start your device. The initial boot is slow, wait up to 8 minutes before assuming there is a problem.

---

Post-Flash Behavior on Tecno Phantom V Fold2 AE10

Here is what is completely normal after a successful flash:

• How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
• The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
• Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
• Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
• First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
• Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
• The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.

---

Troubleshooting Tecno Phantom V Fold2 AE10 Flash Errors

1. Tecno Phantom V Fold2 AE10 Not Recognized by SP Flash Tool:
   • In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the AE10, restart your PC, and try again before changing anything else.
   • If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
   • Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
2. Boot Loop After Flashing:
   • Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
3. Wrong Scatter File / Firmware Mismatch:
   • If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
4. “Download DA FAIL” Error:
   • This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
5. Error 8038 (BROM Error):
   • The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
6. Auth File / Secure Boot Error in Newer SP Flash Tool:
   • Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.

---

Missing IMEI or Corrupt Baseband on Tecno Phantom V Fold2 AE10 After Flashing?

A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:

1. Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
2. Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
3. Run the repair:
   • Connect your device to the computer.
   • Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
   • Click “Start” and let it complete without interrupting the connection.
4. Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.

Video Guide: How to repair IMEI

Credits: https://www.youtube.com/@mhgsmclinic

---

Tecno Phantom V Fold2 AE10 Firmware FAQ

Q1: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.

Q2: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.

Q3: Is this firmware compatible with other Tecno models?
A: No. This firmware is built specifically for the Tecno Phantom V Fold2 AE10 running on the MediaTek Dimensity 9000+ (MT6983) chipset. Even variants of the Phantom V Fold2 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.

Q4: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.

Q5: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.

Q6: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Tecno support if you are concerned.

Q7: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.

Q8: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.

People Also Ask About Tecno Phantom V Fold2 AE10

Can flashing firmware fix a bricked Tecno Phantom V Fold2 AE10?
Yes. If your Tecno Phantom V Fold2 AE10 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Tecno devices.

How do I check my Tecno Phantom V Fold2 AE10 model number before flashing?
Go to Settings > About Phone on your Tecno Phantom V Fold2 AE10 and look for the model number “AE10”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

Will flashing firmware on Tecno Phantom V Fold2 AE10 erase my data?
Yes. Flashing stock firmware on the Tecno Phantom V Fold2 AE10 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.

What is the latest firmware version for Tecno Phantom V Fold2 AE10?
The latest available Tecno Phantom V Fold2 AE10 firmware on this page is version V4635. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.

---

Conclusion

That covers the entire flashing process for the Tecno Phantom V Fold2 AE10. With V4635 installed, your device should boot cleanly and be ready for setup.

If you ran into an issue that is not covered here, or if one of the steps did not work the way it should, let me know in the comments. Include the error code or screenshot if you have one.

Bookmark this page if you work on Tecno devices regularly. I keep it updated when new firmware versions come out.

Browse all Tecno firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.