Last Updated: August 16, 2019
I have put together a complete resource for the Samsung S5690 Galaxy Xcover GT-S5690: official firmware downloads, the correct drivers and flash tool, and step-by-step instructions to unbrick, bypass FRP, or do a clean reflash.
Device: Samsung S5690 Galaxy Xcover GT-S5690 | Chipset: Marvell MG2 800 MHz | Flash Tool: Odin
Android: Android 2.3.6 Gingerbread | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung S5690 Galaxy Xcover GT-S5690 (Marvell MG2 800 MHz)
Flash Tool: Odin
Latest Build: the latest version
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung S5690 Galaxy Xcover GT-S5690 Firmware (Flash File) Drivers, Tools & Guide
Flashing Samsung firmware using Odin is the standard method to restore a Samsung S5690 Galaxy Xcover GT-S5690 to working condition. I have gathered everything you need on this page: the correct firmware file for the Samsung S5690 Galaxy Xcover GT-S5690, the proper Odin version, and the steps that actually work.
Before you start, make sure to sign out of your Samsung account if you are still logged in. If you skip this step, Knox will trigger a lock, and you will have to deal with a KG lock after flashing, which takes extra time. Also, Samsung firmware comes in .tar.md5 format. After extracting the ZIP, you should see files named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If you do not see these, you have the wrong package.
The Samsung S5690 Galaxy Xcover GT-S5690 was released in 2011, so USB driver compatibility on newer Windows versions (10/11) might require manual installation rather than plug-and-play. The stock firmware ships with Android 2.3.6 Gingerbread, which determines the default apps, security features, and interface you will see after flashing. As a Samsung device, the Samsung S5690 Galaxy Xcover GT-S5690 uses Odin for firmware installation. This is the same tool Samsung service centers use, and it works with all Galaxy devices regardless of the chipset.
Samsung firmware uses a multi-file system (AP, BL, CP, CSC) specific to Odin-based flashing, which differs from single-file scatter-based tools. The Samsung S5690 Galaxy Xcover GT-S5690 was released in 2011. This page is maintained with the latest available firmware builds as they become available.
Your Samsung S5690 Galaxy Xcover GT-S5690 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.
Once you flash, the device goes back to factory condition. Everything stored on the phone, photos, messages, apps, will be gone. This clean state is what allows the flash to fix stuck logos, FRP locks, software corruption, and performance issues.
Samsung S5690 Galaxy Xcover GT-S5690 FRP Bypass
You can bypass FRP on the Samsung S5690 Galaxy Xcover GT-S5690 by using a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Reset Samsung S5690 Galaxy Xcover GT-S5690 From Recovery Mode
You can perform a factory reset on the Samsung S5690 Galaxy Xcover GT-S5690 from recovery mode without a computer. Power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Samsung S5690 Galaxy Xcover GT-S5690 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
Samsung S5690 Galaxy Xcover GT-S5690 Firmware Compatibility Check
Selecting the correct firmware version is crucial for a successful flash on the Samsung S5690 Galaxy Xcover GT-S5690. Before downloading anything, verify your exact device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. GT-S5690). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Why Do We Need Samsung S5690 Galaxy Xcover GT-S5690 Firmware?
Samsung devices like the Samsung S5690 Galaxy Xcover GT-S5690 require flashing with Odin to resolve software issues. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:
- Remove persistent malware or adware that survives a factory reset.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Resolve OTA update failures and battery drain issues.
- Restore system apps that were accidentally removed or corrupted.
- Fix startup loops, lagging, and freezing on your device.
- Unlock your device if it has been locked or disabled.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Samsung S5690 Galaxy Xcover GT-S5690
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung S5690 Galaxy Xcover GT-S5690 |
| Firmware Version | N/A |
| File Size | 131.5 MB |
| Android Version | Android 2.3.6 Gingerbread |
| Platform | Marvell MG2 800 MHz |
| Release Date | Released 2011, October |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung S5690 Galaxy Xcover GT-S5690 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung S5690 Galaxy Xcover GT-S5690 Firmware
I have provided the official stock firmware link for the Samsung S5690 Galaxy Xcover GT-S5690 below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: S5690XXKL1_S5690OXXKL1_CYO.zip Size: 131.5 MB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung S5690 Galaxy Xcover GT-S5690 (GT-S5690) should not be confused with other S5690 Galaxy Xcover variants that may have different chipsets or regional firmware. Even devices in the same S5690 Galaxy Xcover line can use completely different processors. Always verify your exact model code “GT-S5690” in Settings > About Phone before downloading any firmware from this page.
- Your model number is a variant of GT-S5690 with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from Marvell MG2 800 MHz. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Samsung S5690 Galaxy Xcover GT-S5690 Firmware
Prepare these items before flashing the Samsung S5690 Galaxy Xcover GT-S5690. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
- Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
- Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
- Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
- Set Up Drivers:
Samsung S5690 Galaxy Xcover GT-S5690 Firmware Installation Guide
The Samsung S5690 Galaxy Xcover GT-S5690 requires Odin for installation. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters, as some flash tools have trouble with them.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and that your PC has been restarted since installation. Skipping the restart is a common reason drivers do not work correctly.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Click the “Start” button to begin.
- Do not disconnect, move the cable, or touch the device until the process is fully complete. Disconnecting mid-flash is how devices get bricked.
- Wait and Reboot:
- Once flashing finishes successfully, disconnect the device.
- Power on your device. The first boot will take longer than usual, give it up to 8 minutes.
Video Guide for Flashing
Troubleshooting Samsung S5690 Galaxy Xcover GT-S5690 Flash Errors
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung S5690 Galaxy Xcover GT-S5690 Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Normal Behavior After Installing Samsung S5690 Galaxy Xcover GT-S5690 Firmware
After installing the Samsung S5690 Galaxy Xcover GT-S5690 firmware, you should expect a few specific behaviors:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
Missing IMEI or Corrupt Baseband on Samsung S5690 Galaxy Xcover GT-S5690 After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Samsung S5690 Galaxy Xcover GT-S5690 Firmware FAQ
Q1: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q2: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q3: Will flashing erase my data?
A: Yes, flashing with Odin restores the device to factory state, including Android 2.3.6 Gingerbread default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q4: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q5: Can I use a Mac or Linux computer for this?
A: Samsung firmware can be flashed using Heimdall on Linux or Mac, but the instructions on this page are written for Odin on Windows. If you only have a Mac, you may want to use a Windows virtual machine or Boot Camp for the most straightforward experience.
Q6: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
Q7: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Samsung support if you are concerned.
Q8: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
People Also Ask About Samsung S5690 Galaxy Xcover GT-S5690
What is the latest firmware version for Samsung S5690 Galaxy Xcover GT-S5690?
The latest available Samsung S5690 Galaxy Xcover GT-S5690 firmware on this page is version the latest version. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung S5690 Galaxy Xcover GT-S5690 erase my data?
Yes. Flashing stock firmware on the Samsung S5690 Galaxy Xcover GT-S5690 with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Samsung S5690 Galaxy Xcover GT-S5690 model number before flashing?
Go to Settings > About Phone on your Samsung S5690 Galaxy Xcover GT-S5690 and look for the model number “GT-S5690”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Samsung S5690 Galaxy Xcover GT-S5690?
Yes. If your Samsung S5690 Galaxy Xcover GT-S5690 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
Conclusion
Your Samsung S5690 Galaxy Xcover GT-S5690 should now be running the latest version on a clean build. If the first boot takes a while, do not worry, that is completely normal after a fresh flash.
Ran into something unexpected? Leave a comment and describe what happened. Include which step you were on and what error you saw. I will get back to you.
Consider sharing this guide with anyone else who has a Samsung device that needs fixing.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
