Last Updated: July 3, 2026
If your Samsung Galaxy Y S5360 GT-S5360 is frozen on the startup screen or not responding, this guide provides the official firmware and steps to restore it.
Device: Samsung Galaxy Y S5360 GT-S5360 | Chipset: | Flash Tool: Odin
Android: Android 2.3.5 (Gingerbread), TouchWiz UI | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy Y S5360 GT-S5360 ()
Flash Tool: Odin
Latest Build: the latest version
Firmware Files: 2 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung Galaxy Y S5360 GT-S5360 Firmware (Flash File) Drivers, Tools & Guide
Flashing Samsung devices with Odin is a standard method to fix software issues. I have compiled the necessary files for the Samsung Galaxy Y S5360 GT-S5360 firmware, the correct Odin version, and the steps required to complete the process.
Before you begin, it is important to sign out of any Samsung accounts on the device. If you skip this step, the Knox security feature may trigger, which can prevent the phone from working correctly. Samsung firmware comes in .tar.md5 format. After you extract the ZIP file, you will see files named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If you do not see these files, you likely have the wrong package.
As a Samsung device, the Samsung Galaxy Y S5360 GT-S5360 uses Odin for firmware installation. This is the same tool used by Samsung service centers. The stock firmware runs Android 2.3.5 (Gingerbread) with the TouchWiz UI, which controls the interface and security features you see after the flash. There are two firmware files available for the Samsung Galaxy Y S5360 GT-S5360 on this page. Choose the one that matches your current Android version for the best result.
This firmware was sourced from verified repositories and checked for integrity before being listed here. Samsung firmware uses a multi-file system (AP, BL, CP, CSC) that is specific to Odin-based flashing, which is different from single-file scatter-based tools.
Your Samsung Galaxy Y S5360 GT-S5360 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.
A full flash will erase everything on the device: apps, accounts, photos, and settings. This clears the slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.
Samsung Galaxy Y S5360 GT-S5360 Hard Reset Guide
To factory reset the Samsung Galaxy Y S5360 GT-S5360 without a computer, hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores the Samsung Galaxy Y S5360 GT-S5360 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
Bypass Google Lock on Samsung Galaxy Y S5360 GT-S5360
The fastest way to bypass FRP on the Samsung Galaxy Y S5360 GT-S5360 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why it is important to remove your Google account before flashing, it avoids this problem entirely.
When Should You Flash Samsung Galaxy Y S5360 GT-S5360?
You should flash the Samsung Galaxy Y S5360 GT-S5360 firmware when the device has software bugs, such as a bootloop or unresponsive screen.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Resolve OTA update failures and battery drain issues.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Update to the latest Android version supported by your phone.
- Restore the original Samsung stock ROM to keep your warranty valid.
- Repair a phone that shuts down randomly or restarts in a loop.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Choosing the Right Firmware Version
Picking the correct firmware requires checking your exact model number and the binary level in your current software settings.
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. GT-S5360). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Firmware Details for Samsung Galaxy Y S5360 GT-S5360
The official specifications for the Samsung Galaxy Y S5360 GT-S5360 firmware are listed below.
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Y S5360 GT-S5360 |
| Firmware Version | N/A |
| File Size | 140.61 MB |
| Android Version | Android 2.3.5 (Gingerbread), TouchWiz UI |
| Platform | |
| Release Date | Released 2011, October |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
Use the table below to determine which specific firmware file matches your current situation.
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung Galaxy Y S5360 GT-S5360 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Y S5360 GT-S5360 Firmware
You can download the official Samsung Galaxy Y S5360 GT-S5360 firmware files from the table provided below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: S5360DDMD1_S5360ODDMD1_INS.zip Size: 140.61 MB | Download Link | Download Link2 |
| File Name: S5360DDMD1_S5360ODDMD1_INU.zip Size: 140.61 MB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy Y S5360 GT-S5360 (GT-S5360) should not be confused with other Galaxy Y S5360 variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Y S5360 line can use completely different processors. Always verify your exact model code “GT-S5360” in Settings > About Phone before downloading any firmware from this page.
- Go to Settings and verify your model is exactly GT-S5360. Phones with similar names can have completely different hardware.
- The chipset in your device should be . If it is different, this firmware will not work.
- Always download directly from the table on this page to ensure you have the correct build.
- Check the file size after downloading, a mismatch with the listed size means a partial or corrupt download.
Samsung Galaxy Y S5360 GT-S5360 Flash Setup Checklist
Go through this list before you open Odin for the Samsung Galaxy Y S5360 GT-S5360. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Save Your IMEI Numbers: Type *#06# in the phone dialer and note down both numbers. These are your device identifiers for the cellular network. If flashing wipes them, you will need the originals to write them back.
- Disconnect Google Accounts: Before you start anything, remove all Google accounts from the phone. Settings then Accounts then tap each Google account and remove it. This avoids the FRP verification screen that appears after flashing if accounts were still linked.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Create a Backup: Copy your data to your computer or an SD card. Flashing replaces the entire software on the phone, which means all personal data, apps, and settings will be permanently deleted.
- Charge First: Get the battery above 50% before starting. The flashing process takes a few minutes and the first boot takes several more. A power failure during either stage can leave the device in a state that requires more advanced recovery.
- Prepare Your PC Connection: You need a Windows computer and a USB cable that supports data transfer. Test the cable first by connecting the phone normally, if it shows up in File Explorer, the cable is good.
- Install the Right Drivers:
How to Install Firmware on Samsung Galaxy Y S5360 GT-S5360
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Hit the “Start” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
Video Guide for Flashing
What Is Normal After a Samsung Galaxy Y S5360 GT-S5360 Flash?
After a successful flash, the phone will take several minutes to boot up for the first time.
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
Troubleshooting Samsung Galaxy Y S5360 GT-S5360 Flash Errors
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy Y S5360 GT-S5360 Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Y S5360 GT-S5360 After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Questions About Samsung Galaxy Y S5360 GT-S5360 Firmware
Q1: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close Odin, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q2: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q3: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q4: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q5: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy Y S5360 GT-S5360 running on the chipset. Even variants of the Galaxy Y S5360 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.
Q7: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q8: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. Samsung devices can usually enter Download Mode even when the screen is completely dead, hold Volume Down + Power for 10 seconds. If the battery is completely drained, charge it for at least 15 minutes first.
People Also Ask About Samsung Galaxy Y S5360 GT-S5360
What is the latest firmware version for Samsung Galaxy Y S5360 GT-S5360?
The latest available Samsung Galaxy Y S5360 GT-S5360 firmware on this page is version the latest version. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung Galaxy Y S5360 GT-S5360 erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Y S5360 GT-S5360 with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Samsung Galaxy Y S5360 GT-S5360 model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Y S5360 GT-S5360 and look for the model number “GT-S5360”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Samsung Galaxy Y S5360 GT-S5360?
Yes. If your Samsung Galaxy Y S5360 GT-S5360 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
Final Thoughts
Your Samsung Galaxy Y S5360 GT-S5360 should now be running the latest version on a clean build. If the first boot takes a while, do not worry, that is completely normal after a fresh flash.
Ran into something unexpected? Leave a comment and describe what happened. Include which step you were on and what error you saw. I will get back to you.
Consider sharing this guide with anyone else who has a Samsung device that needs fixing.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
