Last Updated: June 20, 2026
Getting your Samsung Galaxy Tab 3 7.0 WiFi SM-T210 back to working order involves using the official firmware and a specific process. I have compiled the required files and step-by-step instructions on this page to help you restore the device to its original state.
Device: Samsung Galaxy Tab 3 7.0 WiFi SM-T210 | Chipset: Marvell PXA986 | Flash Tool: Odin
Android: Android 4.4.2 KitKat, TouchWiz UX UI | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy Tab 3 7.0 WiFi SM-T210 (Marvell PXA986)
Flash Tool: Odin
Latest Build: the latest version
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung Galaxy Tab 3 7.0 WiFi SM-T210 Firmware (Flash File) Drivers, Tools & Guide
Installing firmware on a Samsung device using Odin is simple if you have the right files. I have gathered the necessary files and instructions here to help you restore the Samsung Galaxy Tab 3 7.0 WiFi SM-T210 to its original condition.
One thing to do before you start: if your device has a Samsung account signed in, sign it out before doing anything else. Knox will trigger if this step is skipped, and dealing with a KG lock after flashing takes extra time. Also, Samsung firmware comes in .tar.md5 format, after extracting the ZIP, you should see files named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If you do not see these, you have the wrong package.
As a Samsung device, the Samsung Galaxy Tab 3 7.0 WiFi SM-T210 uses Odin for firmware installation. This is the same tool Samsung service centers use, and it works with all Galaxy devices regardless of chipset. The stock firmware ships with Android 4.4.2 KitKat, TouchWiz UX UI, which determines the default apps, security features, and interface you will see after flashing. Only one firmware build is currently available for the Samsung Galaxy Tab 3 7.0 WiFi SM-T210. This is the stock ROM you should use for recovery, unbricking, or FRP bypass.
This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page. Samsung firmware uses a multi-file system (AP, BL, CP, CSC) specific to Odin-based flashing, which differs from single-file scatter-based tools.
Your Samsung Galaxy Tab 3 7.0 WiFi SM-T210 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.
Be aware that flashing overwrites the entire software partition. Your data, apps, and accounts will all be removed. This full wipe is how the flash resolves deep software issues, anything from FRP locks and boot failures to Wi-Fi problems and app crashes.
Hard Reset Samsung Galaxy Tab 3 7.0 WiFi SM-T210
To factory reset Samsung Galaxy Tab 3 7.0 WiFi SM-T210 without a computer, power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Samsung Galaxy Tab 3 7.0 WiFi SM-T210 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
FRP Removal for Samsung Galaxy Tab 3 7.0 WiFi SM-T210
The fastest way to bypass FRP on Samsung Galaxy Tab 3 7.0 WiFi SM-T210 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Why Flash Stock ROM on Samsung Galaxy Tab 3 7.0 WiFi SM-T210?
Samsung devices like the Samsung Galaxy Tab 3 7.0 WiFi SM-T210 are flashed using Odin, regardless of the chipset inside. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Unlock your device if it has been locked or disabled.
- Resolve OTA update failures and battery drain issues.
- Update to the latest Android version supported by your phone.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Verify Your Samsung Galaxy Tab 3 7.0 WiFi SM-T210 Model Before Downloading
The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. SM-T210). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Firmware Details for Samsung Galaxy Tab 3 7.0 WiFi SM-T210
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Tab 3 7.0 WiFi SM-T210 |
| Firmware Version | T210XXBOB1 |
| File Size | 820.5 MB |
| Android Version | Android 4.4.2 KitKat, TouchWiz UX UI |
| Platform | Marvell PXA986 |
| Release Date | Released 2013, July |
| Region | SM |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung Galaxy Tab 3 7.0 WiFi SM-T210 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Tab 3 7.0 WiFi SM-T210 Firmware
Download the official stock firmware for your Samsung Galaxy Tab 3 7.0 WiFi SM-T210 below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: SM-T210_T210XXBOB1_T210ATOBOA1_ATO_4file.zip Size: 820.5 MB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy Tab 3 7.0 WiFi SM-T210 (SM-T210) should not be confused with other Galaxy Tab 3 7.0 WiFi variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Tab 3 7.0 WiFi line can use completely different processors. Always verify your exact model code “SM-T210” in Settings > About Phone before downloading any firmware from this page.
- Open About Phone and make sure the model code reads SM-T210. Do not rely on the name printed on the phone case.
- Verify the chipset is Marvell PXA986. You can see this in recovery mode or by checking the device specifications online.
- Use only the download links provided on this page.
- After downloading, right-click the file and check Properties to confirm the size matches the table above. If it does not, download it again.
Before You Start: Samsung Galaxy Tab 3 7.0 WiFi SM-T210 Requirements
Go through this list before you open Odin for the Samsung Galaxy Tab 3 7.0 WiFi SM-T210. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Save Your IMEI Numbers: Type *#06# in the phone dialer and note down both numbers. These are your device identifiers for the cellular network. If flashing wipes them, you will need the originals to write them back.
- Disconnect Google Accounts: Before you start anything, remove all Google accounts from the phone. Settings then Accounts then tap each Google account and remove it. This avoids the FRP verification screen that appears after flashing if accounts were still linked.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Create a Backup: Copy your data to your computer or an SD card. Flashing replaces the entire software on the phone, which means all personal data, apps, and settings will be permanently deleted.
- Charge First: Get the battery above 50% before starting. The flashing process takes a few minutes and the first boot takes several more. A power failure during either stage can leave the device in a state that requires more advanced recovery.
- Prepare Your PC Connection: You need a Windows computer and a USB cable that supports data transfer. Test the cable first by connecting the phone normally, if it shows up in File Explorer, the cable is good.
- Install the Right Drivers:
Flashing Samsung Galaxy Tab 3 7.0 WiFi SM-T210 Firmware With Odin
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Download the Firmware Package:
- Use the download links in the table above to get the correct firmware file for your device.
- Extract the archive with WinRAR or 7-Zip. Use a short folder path like
D:flashto avoid issues with some tools.
- Check Drivers:
- All drivers from the prerequisites must be installed before connecting your device. Restart your computer after installing them.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Press “Start” to begin writing the firmware to your device.
- Do not unplug the phone, close the flash tool, or interact with the device until the process is 100% complete.
- Wait and Reboot:
- After the tool confirms the flash is complete, safely disconnect your phone.
- Press the power button to start your device. The initial boot is slow, wait up to 8 minutes before assuming there is a problem.
Video Guide for Flashing
What Is Normal After a Samsung Galaxy Tab 3 7.0 WiFi SM-T210 Flash?
Here is what is completely normal after a successful flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
Samsung Galaxy Tab 3 7.0 WiFi SM-T210 Flashing Problems and Fixes
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy Tab 3 7.0 WiFi SM-T210 Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Tab 3 7.0 WiFi SM-T210 After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Questions About Samsung Galaxy Tab 3 7.0 WiFi SM-T210 Firmware
Q1: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. Samsung devices can usually enter Download Mode even when the screen is completely dead, hold Volume Down + Power for 10 seconds. If the battery is completely drained, charge it for at least 15 minutes first.
Q2: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q3: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q4: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.
Q5: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Samsung support if you are concerned.
Q6: Can I use a Mac or Linux computer for this?
A: Samsung firmware can be flashed using Heimdall on Linux or Mac, but the instructions on this page are written for Odin on Windows. If you only have a Mac, you may want to use a Windows virtual machine or Boot Camp for the most straightforward experience.
Q7: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy Tab 3 7.0 WiFi SM-T210 running on the Marvell PXA986 chipset. Even variants of the Galaxy Tab 3 7.0 WiFi with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q8: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
People Also Ask About Samsung Galaxy Tab 3 7.0 WiFi SM-T210
What is the latest firmware version for Samsung Galaxy Tab 3 7.0 WiFi SM-T210?
The latest available Samsung Galaxy Tab 3 7.0 WiFi SM-T210 firmware on this page is version the latest version. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung Galaxy Tab 3 7.0 WiFi SM-T210 erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Tab 3 7.0 WiFi SM-T210 with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Samsung Galaxy Tab 3 7.0 WiFi SM-T210 model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Tab 3 7.0 WiFi SM-T210 and look for the model number “SM-T210”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Samsung Galaxy Tab 3 7.0 WiFi SM-T210?
Yes. If your Samsung Galaxy Tab 3 7.0 WiFi SM-T210 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
Summary
That is everything you need to safely flash the official Samsung Galaxy Tab 3 7.0 WiFi SM-T210 firmware (the latest version) using Odin and get your device working again. If you followed each step, your phone should now be running on a clean build.
If something did not go as expected, a specific error, a step that is not working for your setup, leave a comment below with as much detail as you can: the exact error message, which step you are on, and what you have already tried. I read every comment and will help you work through it.
If this guide helped you, consider sharing it, it is the best way to help someone else who is dealing with the same problem.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
