Last Updated: June 25, 2026
This page contains the necessary files and instructions to restore the Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 to its original state. Download the stock firmware, grab the tools, and follow the guide. Troubleshooting and IMEI repair are covered too.
Device: Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 | Chipset: Intel Atom Z2560 | Flash Tool: Odin
Android: Android 4.2.2 (Jelly Bean), TouchWiz UX UI | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 (Intel Atom Z2560)
Flash Tool: Odin
Latest Build: the latest version
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Flashing the official software is the standard way to restore a Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 to working condition.
This page contains the necessary files and instructions to restore the Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 to its original state. Before beginning, sign out of your Samsung account if one is logged in to prevent triggering a KG lock later. Samsung firmware uses a multi-file system (AP, BL, CP, CSC) specific to Odin-based flashing, which differs from single-file scatter-based tools. This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page.
The Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 was originally released in 2013, which means USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play. As a Samsung device, the Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 uses Odin for firmware installation. This is the same tool Samsung service centers use, and it works with all Galaxy devices regardless of chipset. Only one firmware build is currently available for the Samsung Galaxy Tab 3 10.1 P5200 GT-P5200. This is the stock ROM you should use for recovery, unbricking, or FRP bypass.
Your Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.
Keep in mind that flashing stock firmware erases all data, which is intentional, as it resolves software issues including FRP lock, app problems, slow performance, forgotten pattern locks, a dead or logo-stuck device, Wi-Fi and Bluetooth issues, battery drain, and soft brick situations.
The fastest way to bypass FRP on Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 is to use a free Android apps launcher that lets you access settings during the setup wizard.
After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
To factory reset Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 without a computer, power off the device completely, then hold Volume Up + Power until the recovery menu appears.
Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button. A hard reset erases all data and restores Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
The biggest mistake people make is flashing firmware meant for a different variant.
Before downloading anything, verify your exact device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. GT-P5200). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Samsung devices like the Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 are flashed using Odin, regardless of the chipset inside.
Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:
- Unlock your device if it has been locked or disabled.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Resolve OTA update failures and battery drain issues.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Update to the latest Android version supported by your phone.
- Remove persistent malware or adware that survives a factory reset.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Here is a quick overview of the official firmware specifications.
Use this table to verify the details match your device before proceeding:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 |
| Firmware Version | N/A |
| File Size | N/A |
| Android Version | Android 4.2.2 (Jelly Bean), TouchWiz UX UI |
| Platform | Intel Atom Z2560 |
| Release Date | Released 2013, July |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
This is the question I get asked most often in the comments, so I put together a simple guide.
Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download the official stock firmware for your Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 below.
The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 Firmware (firmwarefile) Size: N/A | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 (GT-P5200) should not be confused with other Galaxy Tab 3 10.1 P5200 variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Tab 3 10.1 P5200 line can use completely different processors. Always verify your exact model code “GT-P5200” in Settings > About Phone before downloading any firmware from this page.
- Open About Phone and make sure the model code reads GT-P5200. Do not rely on the name printed on the phone case.
- Verify the chipset is Intel Atom Z2560. You can see this in recovery mode or by checking the device specifications online.
- Use only the download links provided on this page.
- After downloading, right-click the file and check Properties to confirm the size matches the table above. If it does not, download it again.
Go through this list before you open Odin for the Samsung Galaxy Tab 3 10.1 P5200 GT-P5200.
Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- IMEI Backup: Open the dialer and enter *#06#. Write both IMEI numbers down on paper or take a screenshot. If you ever need to repair your IMEI after flashing, these are essential.
- Remove All Google Accounts: Go to Settings, Accounts, and sign out of every Google account on the device. Leaving accounts signed in triggers FRP lock after a flash, which blocks you from setting up the phone.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Backup Everything: Photos, contacts, messages, WhatsApp data, move it all to a computer or cloud service. The flash will restore the phone to factory state with nothing on it.
- 50% Battery Minimum: Do not start with a low battery. If power cuts out during the flash, the device can become unresponsive and much harder to fix.
- USB Cable and Computer: Use a proper data-transfer USB cable and a Windows PC. Avoid USB hubs, connect directly to the motherboard port for a stable connection.
- Download and Install Drivers:
Step-by-Step: Flash Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 Stock ROM
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Download and Unpack:
- Pick the correct firmware version from the downloads above and save it to your PC.
- Extract the ZIP file. If the extracted folder contains another ZIP inside, extract that one too. You should end up with the actual firmware files, not another archive.
- Driver Check:
- Double-check that you have installed the required drivers. A missing driver is the most common reason the flash tool cannot detect your phone. Reboot your PC after installing.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Start the flash by clicking “Start”.
- Leave everything untouched until completion. Even bumping the USB cable can interrupt the write and cause a failed flash.
- Wait and Reboot:
- The flash is complete when the tool shows a success indicator. Disconnect your phone.
- Turn the phone on. Do not worry if it sits on the boot logo for several minutes, the system is rebuilding itself from scratch.
Video Guide for Flashing
Fix Common Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 Firmware Errors
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Here is what is completely normal after a successful flash.
Check these signs to confirm the process went smoothly:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition.
This is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 Firmware FAQ
Q1: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q2: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
Q3: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.
Q4: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Samsung support if you are concerned.
Q5: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q6: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q7: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 running on the Intel Atom Z2560 chipset. Even variants of the Galaxy Tab 3 10.1 P5200 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q8: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close Odin, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
People Also Ask About Samsung Galaxy Tab 3 10.1 P5200 GT-P5200
What is the latest firmware version for Samsung Galaxy Tab 3 10.1 P5200 GT-P5200?
The latest available Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 firmware on this page is version the latest version. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 and look for the model number “GT-P5200”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Samsung Galaxy Tab 3 10.1 P5200 GT-P5200?
Yes. If your Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
You now have everything needed to flash your Samsung Galaxy Tab 3 10.1 P5200 GT-P5200 back to stock using Odin.
The process is straightforward as long as you follow the steps in order and do not skip the driver installation.
Got stuck somewhere? Drop a comment with the error message and the step number. I check comments regularly and will point you in the right direction.
If this worked for you, share the page so others with the same device can find it too.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
