Last Updated: June 17, 2026
The official Samsung Galaxy S5 SM-G900H firmware is the most reliable way to resolve software issues on this device. This page contains all the necessary files, drivers, and instructions to fix glitches, restore performance, and get your phone working again.
Device: Samsung Galaxy S5 SM-G900H | Chipset: Samsung Exynos 5 Octa 5422 | Flash Tool: Odin
Android: Android 4.4.2 (KitKat), upgradable to 6.0.1 (Marshmallow), TouchWiz UI | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Samsung Galaxy S5 SM-G900H Firmware (Flash File) Drivers, Tools & Guide
Flashing the Samsung Galaxy S5 SM-G900H firmware with Odin is straightforward once you have the correct files and drivers. This guide provides the official Samsung Galaxy S5 SM-G900H firmware, the appropriate Odin version, and the steps needed to fix software problems.
Before you begin, sign out of any Samsung account on the device. Failing to do this can trigger a Knox security lock, which complicates the process significantly. Also, ensure you have the correct firmware package. The files should be named AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 after extracting the ZIP archive. If you see different names, you have the wrong version for your model.
The Samsung Galaxy S5 SM-G900H firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Inside, you will find the required files for Odin. Verify the filenames match the list above to ensure you have the correct package for your device.
Be aware that flashing stock firmware wipes all user data. This is intentional to resolve issues like FRP locks, app crashes, and slow performance. It also fixes bootloops, dead screens, and network connectivity problems.
Hard Reset Samsung Galaxy S5 SM-G900H
To factory reset the Samsung Galaxy S5 SM-G900H without a computer, power the device off completely and hold Volume Up + Power (or Volume Up + Home + Power for older models) until the recovery menu appears.
This action restores the Samsung Galaxy S5 SM-G900H to its original factory state, erasing all data and settings. It fixes common issues such as app crashes, slow performance, and forgotten screen locks. If the device remains problematic after this reset, proceed with the firmware flash in the next sections.
Samsung Galaxy S5 SM-G900H FRP Bypass
The quickest way to bypass the FRP lock on the Samsung Galaxy S5 SM-G900H is to use a free Android apps launcher that allows access to the setup wizard. After flashing or resetting the device, you may encounter a Google account lock. Our free Android apps launcher facilitates this bypass. This is why removing your Google account prior to flashing is highly recommended to avoid this issue entirely.
Why Do We Need Samsung Galaxy S5 SM-G900H Firmware?
Samsung devices, including the Samsung Galaxy S5 SM-G900H, are flashed using Odin regardless of the chipset. This process resolves a wide range of software problems:
- Unlock a locked or disabled device.
- Update to the latest supported Android version.
- Fix startup loops, lag, and freezing on the SM-G900H Galaxy S5.
- Resolve OTA update failures and battery drain.
- Restore the original Samsung stock ROM to maintain warranty status.
- Recover a device stuck in recovery mode.
- Recover from KG lock or Knox issues caused by incorrect flashing.
Learn more about the benefits of stock ROMs and flashing.
Choosing the Right Firmware Version
Before starting the process, verify you have the correct file. Flashing the wrong firmware is difficult to recover from and can damage the device.
- Identify Your Model Number: Go to Settings › About Phone and note your full model (e.g. SM-G900H). The letter suffix is crucial: U/U1 = USA, W = Canada, N = Korea, B/F = International. Flashing the wrong variant causes problems.
- Match the CSC (Region): The 3-letter region code in the filename must match your device. Check Settings › About Phone › Software Information or the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string (e.g.
XXU9BZDP). The number after the letters is the binary level. You cannot downgrade to a lower binary level. If you are on Binary 9, only flash Binary 9 or higher. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen displays your exact model, CSC, and firmware version for confirmation.
Firmware Details for Samsung Galaxy S5 SM-G900H
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy S5 SM-G900H |
| Firmware Version | XXU1ANG3, XXU1BOL2, XXU1CPE6 |
| File Size | 1.35 GB to 1.36 GB |
| Android Version | Android 4.4.2 (KitKat), upgradable to 6.0.1 (Marshmallow), TouchWiz UI |
| Platform | Samsung Exynos 5 Octa 5422 |
| Release Date | Released 2014, April |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This table helps you select the correct file based on your specific situation. Find your scenario and follow the recommendation:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | XXU1CPE6, This is the latest available Samsung Galaxy S5 SM-G900H firmware. |
| FRP / Google account lock only | See the FRP bypass guide, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try XXU1BOL2, sometimes the latest OTA introduces bugs and an older build runs better. Ensure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash XXU1CPE6 first, then follow the IMEI repair guide. Do not skip the reflash. |
| XXU1CPE6 failed with a flash error | Try XXU1BOL2 instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | XXU1CPE6, clean state, fresh start. |
To determine which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). However, before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy S5 SM-G900H Firmware
Download the official stock firmware for your Samsung Galaxy S5 SM-G900H below. The latest available version is XXU1CPE6. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: G900HXXU1ANG3_G900HODD1ANG1_INU.zip Size: 1.35 GB | Download Link | Download Link2 |
| File Name: G900HXXU1BOL2_G900HODD1BOL1_INU.zip Size: 1.36 GB | Download Link | Download Link2 |
| File Name: G900HXXU1CPE6_G900HODD1CPE2_INS.zip Size: 1.35 GB | Download Link | Download Link2 |
| File Name: Samsung_SM-G900H_MT6571_150314182107 Size: N/A | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
- Your model number is a variant of SM-G900H with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from Samsung Exynos 5 Octa 5422. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Samsung Galaxy S5 SM-G900H Firmware
Review this list before opening Odin for the Samsung Galaxy S5 SM-G900H. Two common causes of problems are a Samsung account not signed out before flashing (which triggers a KG lock) and a USB cable that drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
How to Install Firmware on Samsung Galaxy S5 SM-G900H
We are using Odin for this. A tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, these options together provide the cleanest flash result. If you are unsure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters, as some flash tools have trouble with them.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and that your PC has been restarted since installation. Skipping the restart is a common reason drivers do not work correctly.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Click the “Start” button to begin.
- Do not disconnect, move the cable, or touch the device until the process is fully complete. Disconnecting mid-flash is how devices get bricked.
- Wait and Reboot:
- Once flashing finishes successfully, disconnect the device.
- Power on your device. The first boot will take longer than usual, give it up to 8 minutes.
Video Guide for Flashing
What to Expect After Flashing Samsung Galaxy S5 SM-G900H Firmware
Many users worry when something seems unusual after flashing, but it is often normal. Here is what is to be expected after a successful Samsung Galaxy S5 SM-G900H firmware flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings › SIM and Network and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong, it is usually a conflict with leftover data from the old install.
- Samsung Smart Switch: After flashing your Samsung Galaxy S5 SM-G900H firmware, Samsung Smart Switch may prompt you to install additional updates. Let it complete, this ensures your device has the latest security patches for your region.
Missing IMEI or Corrupt Baseband on Samsung Galaxy S5 SM-G900H After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Common Issues When Flashing Samsung Galaxy S5 SM-G900H
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy S5 SM-G900H Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Frequently Asked Questions
Q1: Will flashing the Samsung Galaxy S5 SM-G900H firmware erase my data?
A: Yes, flashing this firmware with Odin restores your device to factory state, including Android 4.4.2 (KitKat), upgradable to 6.0.1 (Marshmallow), TouchWiz UI default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q2: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy S5 SM-G900H running on the Samsung Exynos 5 Octa 5422 chipset. Even the Galaxy S5 with a different letter suffix (for example, a different variant of SM-G900H) can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings › About Phone.
Q3: Can I downgrade from XXU1CPE6 to an older firmware version?
A: It is technically possible on some Exynos builds, but I do not recommend it. Downgrading can cause security issues and app compatibility problems on Android 4.4.2 (KitKat), upgradable to 6.0.1 (Marshmallow), TouchWiz UI. If XXU1CPE6 is causing you trouble, leave a comment below, there is usually a better fix than rolling back.
Q4: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock on the Samsung Galaxy S5 SM-G900H activates when a Google account was still signed in before flashing. This is also why I always recommend signing out of your Google account before flashing, it avoids this issue entirely.
Q5: Are custom ROM options available for the Samsung Galaxy S5 SM-G900H?
A: This guide covers official Samsung stock firmware only. Custom ROM availability for the Samsung Galaxy S5 SM-G900H depends on whether the Samsung Exynos 5 Octa 5422 chipset has open-source kernel support. Check our Custom ROMs page or the XDA Developers forum for device-specific custom ROM threads.
Q6: My Samsung Galaxy S5 SM-G900H is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0, Samsung devices are more reliable on USB 2.0 ports. Disable your antivirus temporarily. If none of that works, leave a comment below with the exact error message and I will help you from there.
Q7: How do I enter recovery mode on my Samsung Galaxy S5 SM-G900H?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu will display the build number for your Samsung Galaxy S5 SM-G900H which you can use to verify your firmware version before flashing.
Q8: My IMEI shows “unknown” after flashing the Samsung Galaxy S5 SM-G900H. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. The important thing: do not insert a SIM card until the IMEI is restored.
Q9: How long does it take to flash Samsung Galaxy S5 SM-G900H firmware?
A: The actual flashing process usually takes between 3 and 10 minutes depending on the firmware size and your USB connection speed. The first boot after flashing takes longer, anywhere from 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
Final Thoughts on Samsung Galaxy S5 SM-G900H Firmware
That is everything you need to safely flash the official Samsung Galaxy S5 SM-G900H firmware (XXU1CPE6) using Odin and get your device working again. If you followed each step, your phone should now be running on a clean build.
If something did not go as expected, a specific error, a step that is not working for your setup, leave a comment below with as much detail as you can: the exact error message, which step you are on, and what you have already tried. I read every comment and will help you work through it.
If this guide helped you, consider sharing it, it is the best way to help someone else who is dealing with the same problem.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
