Last Updated: June 16, 2026
The official firmware for the Samsung Galaxy Note Pro 12.2 SM-P900 is available here. This page contains the download links, drivers, and step-by-step instructions to fix software issues, including bootloops and FRP locks.
Device: Samsung Galaxy Note Pro 12.2 SM-P900 | Chipset: Samsung Exynos 5 Octa 5420 | Flash Tool: Odin
Android: Android 4.4.2 KitKat, TouchWiz UX | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Samsung Galaxy Note Pro 12.2 SM-P900 Firmware (Flash File) Drivers, Tools & Guide
Flashing Samsung firmware with Odin requires specific files and a clear understanding of the process. This guide provides the correct Samsung Galaxy Note Pro 12.2 SM-P900 firmware, the appropriate Odin version, and the steps required for a successful installation.
Before starting, sign out of any Samsung account on the device. If you skip this step, the Knox security counter will trigger, which makes dealing with the resulting lock harder. Samsung firmware is compressed as a ZIP file. You must extract it using WinRAR or 7-Zip. The extracted files must be named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If these names do not appear, you have the wrong package.
Flashing the Samsung Galaxy Note Pro 12.2 SM-P900 firmware restores the device to its original factory state. This resolves software glitches, including FRP locks, app crashes, slow performance, forgotten patterns, bootloops, and dead or logo-stuck states. It also fixes Wi-Fi, Bluetooth, and battery drain issues.
Hard Reset Samsung Galaxy Note Pro 12.2 SM-P900
To perform a factory reset on the Samsung Galaxy Note Pro 12.2 SM-P900 without a computer, turn the device off completely. Then, hold Volume Up + Power (or Volume Up + Home + Power for older models) until the recovery menu appears. Navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset wipes all user data and restores the Samsung Galaxy Note Pro 12.2 SM-P900 to factory settings. This fixes common software problems such as lag, app crashes, and forgotten screen locks. If the issue persists after this step, a full firmware flash is necessary.
Samsung Galaxy Note Pro 12.2 SM-P900 FRP Bypass
The fastest method to bypass FRP on the Samsung Galaxy Note Pro 12.2 SM-P900 is to use an Android apps launcher during the setup wizard. After flashing or resetting, a Google account lock may appear. Our free Android apps launcher allows you to access settings to bypass this lock. This is why removing your Google account before flashing is recommended, it prevents this lock from activating.
Why Do We Need Samsung Galaxy Note Pro 12.2 SM-P900 Firmware?
Flashing the Samsung Galaxy Note Pro 12.2 SM-P900 firmware resolves software malfunctions regardless of the specific issue. This process restores the device to a stable state:
- Unlocks the device if it is disabled or locked.
- Updates the operating system to the latest supported version.
- Fixes boot loops, freezing, and lagging on the SM-P900.
- Resolves failed OTA updates and battery drain.
- Restores the original Samsung stock ROM to maintain warranty status.
- Recovers the device when it only boots into recovery mode.
- Recovers from Knox Guard or KG lock issues caused by incorrect flashing.
Read more about stock ROMs and flashing to understand the benefits.
Choosing the Right Firmware Version
Confirming the correct firmware file prevents installation errors. Flashing the wrong version can lead to a bricked device:
- Identify Your Exact Model Number: Go to Settings › About Phone and record the full model number (e.g. SM-P900). The letter suffix is important, U/U1 = USA, W = Canada, N = Korea, B/F = International. Flashing a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the filename must match your device. Check Settings › About Phone › Software Information for your current CSC. Common codes include XAA (US), BTU (UK), INS (India), and SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP). The number after the letters is the binary level. You cannot downgrade to a lower level. If your device is on Binary 9, only flash Binary 9 or higher. - Confirm the Build Date: The last 4 characters of the PDA version encode the date, the first character is the year (A=2024, B=2025, C=2026), and the second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off the device, then hold Volume Down + Power to enter Download Mode. This screen displays the exact model, CSC, and firmware version for verification.
Firmware Details for Samsung Galaxy Note Pro 12.2 SM-P900
Review the specifications for the official firmware below:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Note Pro 12.2 SM-P900 |
| Firmware Version | EU1COH2 |
| File Size | 1.4 GB |
| Android Version | Android 4.4.2 KitKat, TouchWiz UX |
| Platform | Samsung Exynos 5 Octa 5420 |
| Release Date | Released 2014, February |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
Use this table to identify the correct file for your situation:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | EU1COH2, this is the latest firmware available for the Samsung Galaxy Note Pro 12.2 SM-P900. |
| FRP / Google account lock only | See the FRP bypass guide, a full firmware flash is usually not required. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power) to view the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, newer updates sometimes introduce bugs. Ensure the binary level is the same or higher than your current version. |
| IMEI missing after a previous flash | Re-flash EU1COH2 first, then follow the IMEI repair guide. Do not skip the reflash. |
| EU1COH2 failed with a flash error | Try the next older version instead and verify the AP/BL/CP/CSC file assignments in Odin. |
| Restoring to factory / warranty repair | EU1COH2, provides a clean state. |
To determine which firmware is newer, examine the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). However, always check the binary level first, the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also ensure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Note Pro 12.2 SM-P900 Firmware
Download the official stock firmware for your Samsung Galaxy Note Pro 12.2 SM-P900 below. The latest version is EU1COH2. Verify the file size matches the specifications above to ensure a complete download, as corrupt files can cause further issues.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: P900ZCSAQD1_P900CHNAQD1_CHN_4.4.2.zip Size: 1.4 GB | Download Link | Download Link2 |
| File Name: P900UEU1COH2_P900XAC1COH2_XAC.zip Size: 1.4 GB | Download Link | Download Link2 |
Only download firmware that matches your exact device model. Refer to the selection guide above if you are unsure.
- Your model number is a variant of SM-P900 with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from Samsung Exynos 5 Octa 5420. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Samsung Galaxy Note Pro 12.2 SM-P900 Firmware
Complete these steps before opening Odin for the Samsung Galaxy Note Pro 12.2 SM-P900. Issues often arise from missing drivers, incorrect cables, or failing to sign out of accounts.
- Back Up IMEI Numbers: Dial *#06# and record both IMEI numbers. You will need these if you need to restore the IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid Knox lock.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, and important files. Flashing wipes the device completely.
- Charge Your Device: Ensure at least 50% battery. A device that powers off during a flash is difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
How to Install Firmware on Samsung Galaxy Note Pro 12.2 SM-P900
Use Odin for this process. Keep “Auto Reboot” and “F. Reset Time” checked, these options provide the cleanest flash result. Check our Odin versions page if you are unsure which version to use.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and restart your PC if necessary.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off the phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm.
- Connect the phone to your PC via USB. Odin should show “Added..” in the log area.
- Start Flashing:
- Click the “Start” button.
- Do not disconnect, move the cable, or touch the device until the process finishes. Disconnecting mid-flash causes bricking.
- Wait and Reboot:
- Once flashing finishes, disconnect the device.
- Power on the device. The first boot takes longer than usual, give it up to 8 minutes.
Video Guide for Flashing
What to Expect After Flashing Samsung Galaxy Note Pro 12.2 SM-P900 Firmware
Many users worry when they see certain behaviors after flashing, but these are usually normal. Here is what you should expect after a successful Samsung Galaxy Note Pro 12.2 SM-P900 firmware flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, the process was successful.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this causes bootloops.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Dial *#06# immediately after setup to check your IMEI. Do this before inserting a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings › SIM and Network and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong, it is usually a conflict with leftover data from the old install.
- Samsung Smart Switch: After flashing your Samsung Galaxy Note Pro 12.2 SM-P900 firmware, Samsung Smart Switch may prompt you to install additional updates. Let it complete, this ensures your device has the latest security patches for your region.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Note Pro 12.2 SM-P900 After Flashing?
A missing IMEI on a Samsung device after flashing usually indicates a corrupted EFS partition. This partition stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Common Issues When Flashing Samsung Galaxy Note Pro 12.2 SM-P900
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy Note Pro 12.2 SM-P900 Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Ensure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Frequently Asked Questions
Q1: Will flashing the Samsung Galaxy Note Pro 12.2 SM-P900 firmware erase my data?
A: Yes, flashing this firmware with Odin restores your device to factory state, including Android 4.4.2 KitKat, TouchWiz UX default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q2: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy Note Pro 12.2 SM-P900 running on the Samsung Exynos 5 Octa 5420 chipset. Even the Galaxy Note Pro 12.2 with a different letter suffix (for example, a different variant of SM-P900) can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings › About Phone.
Q3: Can I downgrade from EU1COH2 to an older firmware version?
A: It is technically possible on some Exynos builds, but I do not recommend it. Downgrading can cause security issues and app compatibility problems on Android 4.4.2 KitKat, TouchWiz UX. If EU1COH2 is causing you trouble, leave a comment below, there is usually a better fix than rolling back.
Q4: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock on the Samsung Galaxy Note Pro 12.2 SM-P900 activates when a Google account was still signed in before flashing. This is also why I always recommend signing out of your Google account before flashing, it avoids this issue entirely.
Q5: Are custom ROM options available for the Samsung Galaxy Note Pro 12.2 SM-P900?
A: This guide covers official Samsung stock firmware only. Custom ROM availability for the Samsung Galaxy Note Pro 12.2 SM-P900 depends on whether the Samsung Exynos 5 Octa 5420 chipset has open-source kernel support. Check our Custom ROMs page or the XDA Developers forum for device-specific custom ROM threads.
Q6: My Samsung Galaxy Note Pro 12.2 SM-P900 is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0, Samsung devices are more reliable on USB 2.0 ports. Disable your antivirus temporarily. If none of that works, leave a comment below with the exact error message and I will help you from there.
Q7: How do I enter recovery mode on my Samsung Galaxy Note Pro 12.2 SM-P900?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu will display the build number for your Samsung Galaxy Note Pro 12.2 SM-P900 which you can use to verify your firmware version before flashing.
Q8: My IMEI shows “unknown” after flashing the Samsung Galaxy Note Pro 12.2 SM-P900. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. The important thing: do not insert a SIM card until the IMEI is restored.
Q9: How long does it take to flash Samsung Galaxy Note Pro 12.2 SM-P900 firmware?
A: The actual flashing process usually takes between 3 and 10 minutes depending on the firmware size and your USB connection speed. The first boot after flashing takes longer, anywhere from 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
Final Thoughts on Samsung Galaxy Note Pro 12.2 SM-P900 Firmware
This guide provides all the necessary steps to flash the official Samsung Galaxy Note Pro 12.2 SM-P900 firmware (EU1COH2) using Odin and restore your device to working order. If you followed each step, your phone should now be running on a clean build.
If something did not go as expected, a specific error, a step that is not working for your setup, leave a comment below with as much detail as you can: the exact error message, which step you are on, and what you have already tried. I read every comment and will help you work through it.
If this guide helped you, consider sharing it, it is the best way to help someone else who is dealing with the same problem.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
