Last Updated: July 7, 2026
This page provides the official Samsung Galaxy Fresh S7390 S7392 firmware needed to fix software issues, unbrick the device, or restore factory settings. You will find the flash files, drivers, and a step-by-step guide here.
Device: Samsung Galaxy Fresh S7390 S7392 | Chipset: Broadcom BCM21654G (1 GHz Single-core ARM Cortex-A9) | Flash Tool: Odin
Android: Android 4.1.2 (Jelly Bean) with TouchWiz 4.0 | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy Fresh S7390 S7392 (Broadcom BCM21654G (1 GHz Single-core ARM Cortex-A9))
Flash Tool: Odin
Latest Build: the latest version
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung Galaxy Fresh S7390 S7392 Firmware (Flash File) Drivers, Tools & Guide
Flashing Samsung firmware with Odin is a straightforward process once you understand the steps and requirements. I have compiled everything you need here: the correct firmware file for the Samsung Galaxy Fresh S7390 S7392, the right Odin version, and the steps that work. Before you begin, check if you are signed into a Samsung account. If you skip this, the Knox counter might trigger, making the device harder to manage. Also, ensure the downloaded file is in .tar.md5 format. After extracting the ZIP, look for AP, BL, CP, and CSC files. If you do not see these, you have the wrong package.
Samsung Galaxy Fresh S7390 S7392 firmware is available in a specific file structure used by the Odin flash tool. The device uses Odin for installation, regardless of its chipset. Only one build is currently available for this model. This is the stock ROM you should use for recovery, unbricking, or FRP bypass. The device was released in 2013, so driver installation on Windows 10 or 11 might require manual setup. Samsung firmware uses a multi-file system (AP, BL, CP, CSC) that differs from single-file scatter tools. This page is updated with the latest available builds.
Download and extract the Samsung Galaxy Fresh S7390 S7392 firmware using WinRAR or 7-Zip. You should see files named AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.
Be aware that flashing overwrites the entire software partition. Your data, apps, and accounts will all be removed. This full wipe is how the flash resolves deep software issues, anything from FRP locks and boot failures to Wi-Fi problems and app crashes.
Bypass Google Lock on Samsung Galaxy Fresh S7390 S7392
The fastest method to bypass FRP on the Samsung Galaxy Fresh S7390 S7392 involves using an Android apps launcher during the setup wizard. After flashing or resetting, you might see a Google account lock. Our free Android apps launcher is a quick way to get past this. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Reset Samsung Galaxy Fresh S7390 S7392 From Recovery Mode
To factory reset Samsung Galaxy Fresh S7390 S7392 without a computer, power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Samsung Galaxy Fresh S7390 S7392 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
How to Pick the Correct Samsung Galaxy Fresh S7390 S7392 Firmware
Picking the right firmware for the Samsung Galaxy Fresh S7390 S7392 requires checking your model number and region code. The most common mistake is flashing firmware for a different variant. Before downloading anything, verify your exact device identity.
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. S7392). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
What Samsung Galaxy Fresh S7390 S7392 Firmware Fixes
Flashing the official Samsung Galaxy Fresh S7390 S7392 firmware can resolve various software issues including boot failures and touch problems. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Restore system apps that were accidentally removed or corrupted.
- Recover your device when it only boots into recovery mode.
- Resolve OTA update failures and battery drain issues.
- Repair a phone that shuts down randomly or restarts in a loop.
- Fix startup loops, lagging, and freezing on your device.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Samsung Galaxy Fresh S7390 S7392
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Fresh S7390 S7392 |
| Firmware Version | N/A |
| File Size | 511.19 MB |
| Android Version | Android 4.1.2 (Jelly Bean) with TouchWiz 4.0 |
| Platform | Broadcom BCM21654G (1 GHz Single-core ARM Cortex-A9) |
| Release Date | Released 2013, October |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
Use this table to determine which Samsung Galaxy Fresh S7390 S7392 firmware file you should download based on your current situation. Find your specific issue in the table below and select the corresponding file.
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung Galaxy Fresh S7390 S7392 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Fresh S7390 S7392 Firmware
Download the official stock firmware for your Samsung Galaxy Fresh S7390 S7392 below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: S7392DDUAND1_S7392ODDAND1_INU.zip Size: 511.19 MB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy Fresh S7390 S7392 (S7392) should not be confused with other Galaxy Fresh S7390 variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Fresh S7390 line can use completely different processors. Always verify your exact model code “S7392” in Settings > About Phone before downloading any firmware from this page.
- The model code on your phone must match S7392 exactly. Even a single letter variant (like adding or dropping an “i” or “s”) can mean a different chipset inside.
- Your chipset should be Broadcom BCM21654G (1 GHz Single-core ARM Cortex-A9). Recovery mode shows this information if you are not sure.
- Do not mix firmware from other download sites with the files on this page.
- If the downloaded file is much smaller than what is listed in the table above, re-download it, partial files will fail.
Samsung Galaxy Fresh S7390 S7392 Flash Setup Checklist
Go through this list before you open Odin for the Samsung Galaxy Fresh S7390 S7392. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- IMEI Backup: Open the dialer and enter *#06#. Write both IMEI numbers down on paper or take a screenshot. If you ever need to repair your IMEI after flashing, these are essential.
- Remove All Google Accounts: Go to Settings, Accounts, and sign out of every Google account on the device. Leaving accounts signed in triggers FRP lock after a flash, which blocks you from setting up the phone.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Backup Everything: Photos, contacts, messages, WhatsApp data, move it all to a computer or cloud service. The flash will restore the phone to factory state with nothing on it.
- 50% Battery Minimum: Do not start with a low battery. If power cuts out during the flash, the device can become unresponsive and much harder to fix.
- USB Cable and Computer: Use a proper data-transfer USB cable and a Windows PC. Avoid USB hubs, connect directly to the motherboard port for a stable connection.
- Download and Install Drivers:
Samsung Galaxy Fresh S7390 S7392 Firmware Installation Guide
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Download and Unpack:
- Pick the correct firmware version from the downloads above and save it to your PC.
- Extract the ZIP file. If the extracted folder contains another ZIP inside, extract that one too. You should end up with the actual firmware files, not another archive.
- Driver Check:
- Double-check that you have installed the required drivers. A missing driver is the most common reason the flash tool cannot detect your phone. Reboot your PC after installing.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Start the flash by clicking “Start”.
- Leave everything untouched until completion. Even bumping the USB cable can interrupt the write and cause a failed flash.
- Wait and Reboot:
- The flash is complete when the tool shows a success indicator. Disconnect your phone.
- Turn the phone on. Do not worry if it sits on the boot logo for several minutes, the system is rebuilding itself from scratch.
Video Guide for Flashing
Fix Common Samsung Galaxy Fresh S7390 S7392 Firmware Errors
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy Fresh S7390 S7392 Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
What Is Normal After a Samsung Galaxy Fresh S7390 S7392 Flash?
Here is what is completely normal after a successful flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Fresh S7390 S7392 After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Samsung Galaxy Fresh S7390 S7392 Firmware FAQ
Q1: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close Odin, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q2: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q3: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. Samsung devices can usually enter Download Mode even when the screen is completely dead, hold Volume Down + Power for 10 seconds. If the battery is completely drained, charge it for at least 15 minutes first.
Q4: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q5: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.
Q6: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q7: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy Fresh S7390 S7392 running on the Broadcom BCM21654G (1 GHz Single-core ARM Cortex-A9) chipset. Even variants of the Galaxy Fresh S7390 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q8: Will flashing erase my data?
A: Yes, flashing with Odin restores the device to factory state, including Android 4.1.2 (Jelly Bean) with TouchWiz 4.0 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
People Also Ask About Samsung Galaxy Fresh S7390 S7392
What is the latest firmware version for Samsung Galaxy Fresh S7390 S7392?
The latest available Samsung Galaxy Fresh S7390 S7392 firmware on this page is version the latest version. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung Galaxy Fresh S7390 S7392 erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Fresh S7390 S7392 with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Samsung Galaxy Fresh S7390 S7392 model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Fresh S7390 S7392 and look for the model number “S7392”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Samsung Galaxy Fresh S7390 S7392?
Yes. If your Samsung Galaxy Fresh S7390 S7392 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
Samsung Galaxy Fresh S7390 S7392 Firmware, Final Notes
You have just completed a clean firmware flash on your Samsung Galaxy Fresh S7390 S7392. The device should now be back at the setup wizard on a fresh the latest version build.
Questions, errors, or something not covered here? The comments section is open. Tell me exactly what happened and I will walk you through the fix.
If you found this useful, a quick share goes a long way, someone else with the same device is probably searching for this right now.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
