Last Updated: July 10, 2026
If your Samsung Galaxy Core Prime G361H is stuck, frozen, or not responding, this guide provides the official firmware and steps to restore it.
Device: Samsung Galaxy Core Prime G361H | Chipset: Qualcomm MSM8916 Snapdragon 410 (28 nm) | Flash Tool: Odin
Android: Android 4.4.4 (KitKat), upgradable to 5.1.1 (Lollipop) | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy Core Prime G361H (Qualcomm MSM8916 Snapdragon 410 (28 nm))
Flash Tool: Odin
Latest Build: XXU0AOJ1
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung Galaxy Core Prime G361H Firmware (Flash File) Drivers, Tools & Guide
Flashing Samsung devices with Odin is a standard procedure once you understand the file structure. This page contains the correct Samsung Galaxy Core Prime G361H firmware, the right Odin version, and the steps to perform the flash.
Before you begin, sign out of your Samsung account. If you skip this, the Knox security feature will trigger a lock after flashing, which complicates the process. The firmware package is a ZIP file that contains multiple files: AP, BL, CP, and CSC. If these files are missing, the package is incorrect.
Released in 2014, the Samsung Galaxy Core Prime G361H runs on the Qualcomm MSM8916 Snapdragon 410 processor. Because of its age, connecting it to Windows 10 or 11 might require manual driver installation. The stock software starts at Android 4.4.4 (KitKat) and can be updated to 5.1.1 (Lollipop). This firmware uses a multi-part system specific to Odin, unlike single-file tools.
Samsung firmware uses a multi-file system (AP, BL, CP, CSC) specific to Odin-based flashing, which differs from single-file scatter-based tools. This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page.
Download the ZIP file for your Samsung Galaxy Core Prime G361H firmware and extract it using WinRAR or 7-Zip. You will find files named AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If these files are not present, you have the wrong download.
Flashing restores the device to its factory state. All data, including photos, messages, and apps, will be erased. This clean slate is necessary to fix stuck logos, FRP locks, software corruption, and performance issues.
Remove FRP Lock on Samsung Galaxy Core Prime G361H
To bypass the Google Factory Reset Protection (FRP) on the Samsung Galaxy Core Prime G361H, use a launcher app that allows access to settings during setup. This app is often the quickest method to bypass the lock. I always recommend removing your Google account before flashing to prevent this issue entirely.
Factory Reset Samsung Galaxy Core Prime G361H Without a PC
To perform a factory reset on the Samsung Galaxy Core Prime G361H without a computer, power off the device and press Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Samsung Galaxy Core Prime G361H to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
Verify Your Samsung Galaxy Core Prime G361H Model Before Downloading
The most common error is flashing firmware for the wrong variant. Before downloading anything, verify your exact device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. G361H). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
What Samsung Galaxy Core Prime G361H Firmware Fixes
Samsung devices like the Samsung Galaxy Core Prime G361H are flashed using Odin, regardless of the chipset inside. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:
- Restore the original Samsung stock ROM to keep your warranty valid.
- Recover your device when it only boots into recovery mode.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Fix startup loops, lagging, and freezing on your device.
- Resolve OTA update failures and battery drain issues.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Samsung Galaxy Core Prime G361H
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Core Prime G361H |
| Firmware Version | XXU0AOJ1 |
| File Size | 678.09 MB |
| Android Version | Android 4.4.4 (KitKat), upgradable to 5.1.1 (Lollipop) |
| Platform | Qualcomm MSM8916 Snapdragon 410 (28 nm) |
| Release Date | Released 2014, November |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | XXU0AOJ1, download this one. It is the latest Samsung Galaxy Core Prime G361H firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash XXU0AOJ1 first, then follow the IMEI repair guide. Do not skip the reflash. |
| XXU0AOJ1 failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | XXU0AOJ1, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Core Prime G361H Firmware
Download the official stock firmware for your Samsung Galaxy Core Prime G361H below. The latest available version is XXU0AOJ1. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: G361HXXU0AOJ1_G361HODD0AOG9_INS.zip Size: 678.09 MB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy Core Prime G361H (G361H) should not be confused with other Galaxy Core Prime variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Core Prime line can use completely different processors. Always verify your exact model code “G361H” in Settings > About Phone before downloading any firmware from this page.
- Your model number is a variant of G361H with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from Qualcomm MSM8916 Snapdragon 410 (28 nm). Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
What You Need Before Flashing Samsung Galaxy Core Prime G361H
Go through this list before you open Odin for the Samsung Galaxy Core Prime G361H. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Samsung Galaxy Core Prime G361H Firmware Installation Guide
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Hit the “Start” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
Video Guide for Flashing
Troubleshooting Samsung Galaxy Core Prime G361H Flash Errors
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy Core Prime G361H Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
What Is Normal After a Samsung Galaxy Core Prime G361H Flash?
Here is what is completely normal after a successful flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Core Prime G361H After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Samsung Galaxy Core Prime G361H Firmware FAQ
Q1: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q2: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q3: Can I go back to an older firmware version?
A: It is technically possible on some Qualcomm builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q4: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Samsung support if you are concerned.
Q5: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.
Q6: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy Core Prime G361H running on the Qualcomm MSM8916 Snapdragon 410 (28 nm) chipset. Even variants of the Galaxy Core Prime with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q7: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
Q8: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
People Also Ask About Samsung Galaxy Core Prime G361H
What is the latest firmware version for Samsung Galaxy Core Prime G361H?
The latest available Samsung Galaxy Core Prime G361H firmware on this page is version XXU0AOJ1. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
How do I check my Samsung Galaxy Core Prime G361H model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Core Prime G361H and look for the model number “G361H”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
What chipset does the Samsung Galaxy Core Prime G361H use?
The Samsung Galaxy Core Prime G361H is powered by the Qualcomm MSM8916 Snapdragon 410 (28 nm), a Qualcomm processor. Flashing requires QFIL (Qualcomm Flash Image Loader) and Qualcomm HS-USB QDLoader drivers. The device must be in EDL (Emergency Download) mode for firmware installation.
Will flashing firmware on Samsung Galaxy Core Prime G361H erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Core Prime G361H with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Final Thoughts
You now have everything needed to flash your Samsung Galaxy Core Prime G361H back to stock using Odin. The process is straightforward as long as you follow the steps in order and do not skip the driver installation.
Got stuck somewhere? Drop a comment with the error message and the step number. I check comments regularly and will point you in the right direction.
If this worked for you, share the page so others with the same device can find it too.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
