Last Updated: August 9, 2026
This page has everything for flashing your Infinix Note 60 Pro X6878: the stock ROM files, the right tools and drivers, step-by-step instructions, plus FRP bypass and troubleshooting guides all in one place.
Device: Infinix Note 60 Pro X6878 | Chipset: Qualcomm SM7635-AC Snapdragon 7s Gen 4 | Flash Tool: QFIL (Qualcomm Flash Image Loader)
Android: Android 16, XOS 16 | File Type: ZIP (Contains Firehose programmer file [*.mbn], rawprogram0.xml, patch0.xml)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Note 60 Pro X6878 (Qualcomm SM7635-AC Snapdragon 7s Gen 4)
Flash Tool: QFIL (Qualcomm Flash Image Loader)
Latest Build: 16.1.0.135SP10
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, QFIL (Qualcomm Flash Image Loader), USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Note 60 Pro X6878 Firmware (Flash File) Drivers, Tools & Guide
Qualcomm-powered devices handle flashing differently from MediaTek. QFIL is less forgiving, and selecting the wrong programmer file will stop the process right away. I put this guide together to make things straightforward: the right firmware, the correct QFIL setup, and the steps that work reliably on Infinix Qualcomm devices.
The most important thing to check before you begin: after extracting the firmware, look for the Firehose .mbn file first. If it is not there, you have the wrong package. Do not load it into QFIL hoping it will work, that mistake alone can cost you a lot of time troubleshooting.
The Infinix Note 60 Pro X6878 is a relatively recent device (released 2026), so you should expect active firmware updates and good driver support on modern Windows systems. Powered by a Qualcomm SM7635-AC Snapdragon 7s Gen 4 (Qualcomm) processor, the Infinix Note 60 Pro X6878 requires Qualcomm Flash Image Loader (QFIL) and Qualcomm HS-USB drivers. Make sure to install the correct driver package before connecting your device. The stock firmware ships with Android 16, XOS 16, which determines the default apps, security features, and interface you will see after flashing.
The Infinix Note 60 Pro X6878 was released in 2026. This page is maintained with the latest available firmware builds as they become available. This firmware was sourced directly from verified repositories and checked for integrity before being listed on this page.
Your Infinix Note 60 Pro X6878 firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the Firehose programmer file (*.mbn), rawprogram0.xml, and patch0.xml before proceeding.
Once you flash, the device goes back to factory condition. Everything stored on the phone, photos, messages, apps, will be gone. This clean state is what allows the flash to fix stuck logos, FRP locks, software corruption, and performance issues.
Infinix Note 60 Pro X6878 Google Account Bypass After Reset
The fastest way to bypass FRP on Infinix Note 60 Pro X6878 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Factory Reset Infinix Note 60 Pro X6878 Without a PC
To factory reset Infinix Note 60 Pro X6878 without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Infinix Note 60 Pro X6878 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using QFIL (Qualcomm Flash Image Loader) is covered in the following sections.
Verify Your Infinix Note 60 Pro X6878 Model Before Downloading
The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Verify Your Exact Model: In Settings, look for the model code “X6878”. Some Infinix phones share the same marketing name but have different internal hardware.
- Confirm the Processor: This build targets the Qualcomm SM7635-AC Snapdragon 7s Gen 4 chipset. You can check your chipset via recovery mode or a hardware info app.
- Review the Version Number: The firmware version in the download table should be close to or newer than what your device is currently running.
- Use Recovery Mode as a Safety Check: Before flashing, boot into recovery to see the current build number and chipset printed on screen. This is the most trustworthy check.
- Verify the Region: Some firmware builds are region-specific. Confirm the download matches your device region or is listed as global.
Common Reasons to Reinstall Infinix Note 60 Pro X6878 Firmware
The Infinix Note 60 Pro X6878 is powered by a Qualcomm chipset, and when Qualcomm devices run into software problems, flashing via QFIL is the standard recovery method. Here is what the stock firmware can do:
- Update to the latest Android version supported by your phone.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Unlock your device if it has been locked or disabled.
- Restore system apps that were accidentally removed or corrupted.
- Remove persistent malware or adware that survives a factory reset.
- Repair a phone that shuts down randomly or restarts in a loop.
- Safely exit EDL (9008) mode after a failed flash attempt on your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Infinix Note 60 Pro X6878
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Note 60 Pro X6878 |
| Firmware Version | 16.1.0.135SP10 |
| File Size | 9.4 GB |
| Android Version | Android 16, XOS 16 |
| Platform | Qualcomm SM7635-AC Snapdragon 7s Gen 4 |
| Release Date | Released 2026, March |
| Region | Global, Africa and Asia |
| File Type | ZIP (Contains Firehose programmer file [*.mbn], rawprogram0.xml, patch0.xml) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | 16.1.0.135SP10, download this one. It is the latest Infinix Note 60 Pro X6878 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash 16.1.0.135SP10 first, then follow the IMEI repair guide. Do not skip the reflash. |
| 16.1.0.135SP10 failed with a flash error | Try the next older version instead and double-check your Firehose programmer file (*.mbn), rawprogram0.xml, and patch0.xml selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | 16.1.0.135SP10, clean state, fresh start. |
For Qualcomm devices, use the latest build unless you have a specific reason not to. Older Firehose packages can sometimes cause partition table issues that are difficult to fix. The newest build is almost always the right choice.
Download Infinix Note 60 Pro X6878 Firmware
Download the official stock firmware for your Infinix Note 60 Pro X6878 below. The latest available version is 16.1.0.135SP10. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Note_60_Pro_5G_X6878_16.1.0.135SP10_IN001PF001AZ_Indian_Market_060226_QFIL.zip Size: 9.4 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Note 60 Pro X6878 (X6878) should not be confused with other Note 60 Pro variants that may have different chipsets or regional firmware. Even devices in the same Note 60 Pro line can use completely different processors. Always verify your exact model code “X6878” in Settings > About Phone before downloading any firmware from this page.
- The model code on your phone must match X6878 exactly. Even a single letter variant (like adding or dropping an “i” or “s”) can mean a different chipset inside.
- Your chipset should be Qualcomm SM7635-AC Snapdragon 7s Gen 4. Recovery mode shows this information if you are not sure.
- Do not mix firmware from other download sites with the files on this page.
- If the downloaded file is much smaller than what is listed in the table above, re-download it, partial files will fail.
Prepare Your Infinix Note 60 Pro X6878 for Flashing
Get all of this sorted before you open QFIL for your Infinix Note 60 Pro X6878. In most cases I have seen with Infinix Qualcomm devices, the 9008 driver installation is where things go wrong first. If Windows does not recognise your device in EDL mode, that is almost always the reason. Install the Qualcomm HS-USB driver first, restart your PC, then proceed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Infinix Note 60 Pro X6878 Firmware Installation Guide
We are using QFIL from the QPST suite. Make sure your device is in EDL mode, also called 9008 mode, before connecting it. The most reliable way to confirm this is to check Device Manager for “Qualcomm HS-USB QDLoader 9008.” If you see that entry, your device is in the correct mode and you can proceed.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- In QFIL, select Flat Build from the “Select Build” dropdown. Click Browse next to “Programmer Path” and select the Firehose .mbn file. Click Load XML and select rawprogram0.xml, then patch0.xml.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Hit the “Download” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
Video Guide for Flashing
Infinix Note 60 Pro X6878 Flashing Problems and Fixes
- Infinix Note 60 Pro X6878 Not Entering EDL (9008) Mode:
- Hold Volume Down and Power until the screen goes black, then connect the USB cable. Check Device Manager for “Qualcomm HS-USB QDLoader 9008”, that entry confirms EDL mode is active.
- If it is not showing, the EDL test point method may be needed for your specific device. XDA Developers has guides for most models.
- QFIL “Sahara Communication Failure” Error:
- This almost always means the wrong Firehose programmer file (.mbn) was selected. Go back to the firmware folder and confirm you are selecting the .mbn file specifically.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset. If the recovery partition was also overwritten and is not accessible, you will need to reflash.
- Infinix Note 60 Pro X6878 Not Recognized by QFIL:
- Reinstall the Qualcomm HS-USB QDLoader 9008 driver and restart your PC before retrying. Antivirus software can also interfere here, disable it temporarily during the flash process.
Normal Behavior After Installing Infinix Note 60 Pro X6878 Firmware
Here is what is completely normal after a successful flash:
- How to know the flash was successful: QFIL will display “Download Succeed” in the status bar. If you see this, the flash completed correctly.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
Missing IMEI or Corrupt Baseband on Infinix Note 60 Pro X6878 After Flashing?
A missing IMEI on a Qualcomm device after flashing is less common than on MediaTek, but it does happen, usually when the modem partition was not written correctly or was left out of the flash. QFIL or QPST can be used to address this. XDA Developers has device-specific IMEI repair threads for most Infinix Qualcomm models. Look up your exact model there, the process varies enough between devices that a general guide would not give you accurate steps.
Common Questions About Flashing Infinix Note 60 Pro X6878
Q1: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q2: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in QFIL (Qualcomm Flash Image Loader) appears stuck, give it a few more minutes before assuming something went wrong.
Q3: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Infinix support if you are concerned.
Q4: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q5: My device is not detected by QFIL (Qualcomm Flash Image Loader). What should I do?
A: Start with the drivers, reinstall the Qualcomm HS-USB QDLoader 9008 driver, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Qualcomm devices, QPST can handle IMEI restoration. Do not insert a SIM card until the IMEI is restored.
Q7: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q8: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
People Also Ask About Infinix Note 60 Pro X6878
Will flashing firmware on Infinix Note 60 Pro X6878 erase my data?
Yes. Flashing stock firmware on the Infinix Note 60 Pro X6878 with QFIL (Qualcomm Flash Image Loader) performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Infinix Note 60 Pro X6878 model number before flashing?
Go to Settings > About Phone on your Infinix Note 60 Pro X6878 and look for the model number “X6878”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Infinix Note 60 Pro X6878?
Yes. If your Infinix Note 60 Pro X6878 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with QFIL (Qualcomm Flash Image Loader) can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.
What chipset does the Infinix Note 60 Pro X6878 use?
The Infinix Note 60 Pro X6878 is powered by the Qualcomm SM7635-AC Snapdragon 7s Gen 4, a Qualcomm processor. Flashing requires QFIL (Qualcomm Flash Image Loader) and Qualcomm HS-USB QDLoader drivers. The device must be in EDL (Emergency Download) mode for firmware installation.
Infinix Note 60 Pro X6878 Firmware, Final Notes
You have just completed a clean firmware flash on your Infinix Note 60 Pro X6878. The device should now be back at the setup wizard on a fresh 16.1.0.135SP10 build.
Questions, errors, or something not covered here? The comments section is open. Tell me exactly what happened and I will walk you through the fix.
If you found this useful, a quick share goes a long way, someone else with the same device is probably searching for this right now.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
