Last Updated: August 1, 2026
This page provides everything required to flash your Infinix Hot 7 X624B: official stock ROM files, compatible tools and drivers, step-by-step instructions, plus FRP bypass and troubleshooting guides all in one convenient location.
Device: Infinix Hot 7 X624B | Chipset: MediaTek MT6580 | Flash Tool: SP Flash Tool
Android: Android 8.1 Oreo (Go edition) | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Hot 7 X624B (MediaTek MT6580)
Flash Tool: SP Flash Tool
Latest Build: V415
Firmware Files: 6 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Hot 7 X624B Firmware (Flash File) Drivers, Tools & Guide
The Infinix Hot 7 X624B regularly enters my workshop with common issues like FRP locks, bootloop problems, or devices stuck at the Infinix logo. This guide consolidates all necessary resources: firmware downloads, required tools, and the precise flashing process I use professionally.
Before starting, extract the firmware to a straightforward folder path such as C:FirmwareX624B. SP Flash Tool may struggle locating the scatter file if the path contains spaces or special characters, potentially causing unnecessary delays during preparation.
Released in 2019, the Infinix Hot 7 X624B may require manual driver installation on newer Windows versions (10/11) rather than plug-and-play functionality. The stock firmware ships with Android 8.1 Oreo (Go edition), which determines default applications, security features, and interface elements. Powered by a MediaTek MT6580 chipset, this device requires SP Flash Tool and VCOM/MTK drivers for flashing procedures.
This page is continuously updated with the latest available firmware builds. All files have been verified across two independent sources to confirm they are authentic, unmodified stock ROMs.
Your Infinix Hot 7 X624B firmware arrives as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extraction, open the folder and verify the presence of the scatter file before proceeding.
Flashing returns the device to factory condition, removing all stored data including photos, messages, and applications. This clean state resolves issues like stuck logos, FRP locks, software corruption, and performance problems.
FRP Removal for Infinix Hot 7 X624B
The quickest method to bypass FRP on the Infinix Hot 7 X624B involves using a free Android apps launcher that provides settings access during the setup wizard. After flashing or factory reset, a Google account lock (FRP) may appear. Our free Android apps launcher offers the fastest solution to bypass this lock. Removing your Google account before flashing prevents this issue entirely.
Infinix Hot 7 X624B Hard Reset Guide
To factory reset the Infinix Hot 7 X624B without a computer, power off the device completely, then simultaneously hold Volume Up and Power until the recovery menu appears. Use volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores the Infinix Hot 7 X624B to its original factory state, resolving most software issues including slow performance, app crashes, forgotten screen locks, and bootloops. Persistent problems after a factory reset require full firmware flashing using SP Flash Tool as detailed below.
How to Pick the Correct Infinix Hot 7 X624B Firmware
The most frequent error occurs when flashing firmware intended for a different device variant. Before downloading, confirm your exact device identity:
- Check About Phone: Your device model must display “X624B” exactly. Minor code differences indicate different chipsets and partition layouts.
- Verify Chipset Type: This firmware specifically targets MediaTek MT6580. Flashing on other chipsets will fail or potentially brick the device.
- Compare Firmware Versions: Match your current build number with available versions in the download section to select the appropriate file.
- Use Recovery Mode: Settings are inaccessible: Boot into recovery mode to read build and chipset details directly from the display.
- Confirm Regional Compatibility: Some firmware packages target specific regions. Ensure the download matches your device’s origin.
Common Reasons to Reinstall Infinix Hot 7 X624B Firmware
The Infinix Hot 7 X624B utilizes a MediaTek chipset, making SP Flash Tool the standard firmware recovery method. Stock firmware reinstalling helps with the following issues:
- Remove persistent malware or adware surviving factory resets
- Fix startup loops, lagging, and freezing behaviors
- Resolve OTA update failures and battery drain problems
- Recover devices booting only into recovery mode
- Restore accidentally removed or corrupted system apps
- Fix touchscreen responsiveness issues from corrupted system builds
- Resolve “Download DA FAIL” errors and Secure Boot authentication problems specific to MediaTek MT6580
Learn more about stock ROMs and why flashing works.
Firmware Details for Infinix Hot 7 X624B
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Hot 7 X624B |
| Firmware Version | V219, V415, V201 |
| File Size | 1.48 GB to 1.52 GB |
| Android Version | Android 8.1 Oreo (Go edition) |
| Platform | MediaTek MT6580 |
| Release Date | Released 2019, January |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the most common question I receive, so I have created a simple decision guide. Match your situation to the table below for the correct file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V415, download this one. It is the latest Infinix Hot 7 X624B firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V219, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V415 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V415 failed with a flash error | Try V219 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V415, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend unnecessary time with older builds when the newest firmware would have worked perfectly. Only consider an older version if the latest fails repeatedly, and confirm it is a driver issue rather than firmware compatibility.
Download Infinix Hot 7 X624B Firmware
Download the official stock firmware for your Infinix Hot 7 X624B below. The latest available version is V415. After downloading, verify the file size matches the table above, a size mismatch usually indicates a partial or corrupt download, and flashing corrupt files creates more problems than they solve.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Hot_7_X624B_MT6580_H8026IJK_V219_190417.zip Size: 1.49 GB | Download Link | Download Link2 |
| File Name: X624B-H8026IJK-O-201203V415.zip Size: 1.52 GB | Download Link | Download Link2 |
| File Name: X624B-H8026IJK-O-190417V219.zip Size: 1.51 GB | Download Link | Download Link2 |
| File Name: X624B_MT6580_H8026IJK_V219.zip Size: 1.49 GB | Download Link | Download Link2 |
| File Name: X624B-H8026IJK-O-190417V219.zip Size: 1.51 GB | Download Link | Download Link2 |
| File Name: X624B-H8026IJK-O-190201V201 Size: 1.48 GB | Download Link | Download Link2 |
Only download firmware fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Hot 7 X624B (X624B) should not be confused with other Hot 7 variants that may have different chipsets or regional firmware. Even devices in the same Hot 7 line can use completely different processors. Always verify your exact model code “X624B” in Settings > About Phone before downloading any firmware from this page.
- The model code on your phone must match X624B exactly. Even a single letter variant (like adding or dropping an “i” or “s”) can mean a different chipset inside.
- Your chipset should be MediaTek MT6580. Recovery mode shows this information if you are not sure.
- Do not mix firmware from other download sites with the files on this page.
- If the downloaded file is much smaller than what is listed in the table above, re-download it, partial files will fail.
Prerequisites for Infinix Hot 7 X624B Firmware
Do not skip this section. Most failed Infinix flashes result from rushing through preparation steps. The VCOM driver installation is essential for the Infinix Hot 7 X624B and other MediaTek devices. Windows may display the device in Device Manager, but SP Flash Tool will not detect it without the correct VCOM driver.
- Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
- Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
- Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
- Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
- Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
- Set Up Drivers:
Flashing Infinix Hot 7 X624B Firmware With SP Flash Tool
We use SP Flash Tool for this process. For older devices, I recommend trying SP Flash Tool v5.1924 first. Newer SP Flash Tool versions require a DA (Download Agent) file that older firmware packages do not include, causing “Auth” errors. If SP Flash Tool continuously requests an auth file you do not have, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Download and Unpack:
- Select the correct firmware version from the downloads above and save it to your PC.
- Extract the ZIP file. If the extracted folder contains another ZIP inside, extract that one too. You should end up with the actual firmware files, not another archive.
- Driver Check:
- Verify you have installed the required drivers. A missing driver is the most common reason the flash tool cannot detect your phone. Reboot your PC after installation.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Start the flash by clicking “Download”.
- Leave everything untouched until completion. Even bumping the USB cable can interrupt the write and cause a failed flash.
- Wait and Reboot:
- The flash is complete when the tool shows a success indicator. Disconnect your phone.
- Turn the phone on. Do not worry if it sits on the boot logo for several minutes, the system is rebuilding itself from scratch.
Troubleshooting Infinix Hot 7 X624B Flash Errors
- Infinix Hot 7 X624B Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X624B, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
Post-Flash Behavior on Infinix Hot 7 X624B
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
Missing IMEI or Corrupt Baseband on Infinix Hot 7 X624B After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Infinix Hot 7 X624B Firmware FAQ
Q1: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q2: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q3: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q4: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q5: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q6: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q7: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
Q8: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
People Also Ask About Infinix Hot 7 X624B
What is the latest firmware version for Infinix Hot 7 X624B?
The latest available Infinix Hot 7 X624B firmware on this page is version V415. This page has 6 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
How do I check my Infinix Hot 7 X624B model number before flashing?
Go to Settings > About Phone on your Infinix Hot 7 X624B and look for the model number “X624B”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Will flashing firmware on Infinix Hot 7 X624B erase my data?
Yes. Flashing stock firmware on the Infinix Hot 7 X624B with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Can flashing firmware fix a bricked Infinix Hot 7 X624B?
Yes. If your Infinix Hot 7 X624B is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.
Wrapping Up: Infinix Hot 7 X624B Firmware
That is everything you need to safely flash the official Infinix Hot 7 X624B firmware (V415) using SP Flash Tool and get your device working again. If you followed each step, your phone should now be running on a clean build.
If something did not go as expected, a specific error, a step that is not working for your setup, leave a comment below with as much detail as you can: the exact error message, which step you are on, and what you have already tried. I read every comment and will help you work through it.
If this guide helped you, consider sharing it, it is the best way to help someone else who is dealing with the same problem.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
