Last Updated: August 14, 2026
This page contains the necessary files and instructions for flashing your Infinix Hot 50 4G X6882. You will find the stock ROM, the correct drivers, and step-by-step guides to fix bootloops, bypass FRP, and restore your device to a clean state.
Device: Infinix Hot 50 4G X6882 | Chipset: MediaTek Helio G100 (MT6789H) | Flash Tool: SP Flash Tool
Android: Android 14, XOS 14.5 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Hot 50 4G X6882 (MediaTek Helio G100 (MT6789H))
Flash Tool: SP Flash Tool
Latest Build: V576
Firmware Files: 2 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Hot 50 4G X6882 Firmware (Flash File) Drivers, Tools & Guide
The Infinix Hot 50 4G X6882 comes into my repair shop frequently. Common problems include the phone getting stuck on the logo, bootloops, or the Google account verification screen. This guide covers all these issues and provides the exact steps to resolve them. I have consolidated the necessary tools and firmware into one place for your convenience.
One thing I always recommend before you start: extract the firmware to a simple folder path, something like C:FirmwareX6882. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. It is a small thing, but it saves a frustrating few minutes of wondering why the tool is not loading the file.
Because the Infinix Hot 50 4G X6882 uses a MediaTek chipset, you must use SP Flash Tool and VCOM drivers to perform a firmware flash. These are included in the prerequisites below. There are 2 firmware files available for the Infinix Hot 50 4G X6882 on this page. Pick the one that matches your current Android version for the smoothest flash. Released in 2024, the Infinix Hot 50 4G X6882 has been on the market long enough that multiple firmware builds are available, giving you options if one version causes issues.
This device was released in 2024. This page is maintained with the latest available firmware builds as they become available. As a Transsion Holdings brand, the Infinix Hot 50 4G X6882 follows similar repair procedures as other devices in the same line.
The official firmware for the Infinix Hot 50 4G X6882 is a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
Flashing the stock firmware wipes all data. This clean slate fixes many persistent software issues, including bootloops, battery drain, and forgotten screen locks.
Remove FRP Lock on Infinix Hot 50 4G X6882
The quickest method to bypass the Google account lock on the Infinix Hot 50 4G X6882 involves using a specific app launcher during the setup wizard. If you see the FRP screen after flashing, you can use this method to bypass it. I suggest removing your Google account before starting the flash to avoid this situation entirely.
Infinix Hot 50 4G X6882 Hard Reset Guide
You can perform a factory reset on the Infinix Hot 50 4G X6882 without a computer by using the hardware keys. Power off the device, then hold Volume Up and Power simultaneously until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A factory reset wipes all personal data and restores the device to its original factory state. This resolves issues like slow performance, app crashes, and bootloops. If the problem remains after a reset, a full firmware flash is required.
Which Firmware Version Does Your Infinix Hot 50 4G X6882 Need?
Using the wrong firmware version is the most common error when repairing the Infinix Hot 50 4G X6882. Before downloading a file, verify your device’s identity to ensure compatibility.
- Check About Phone: Open Settings and find your exact model number. It should read “X6882”, not a similar name, the exact code.
- Match the Chipset: This firmware is built for MediaTek Helio G100 (MT6789H). If your device has a different processor, it will not flash correctly.
- Look at the Build Number: The build string in your current software should reference the Hot 50 4G line. Cross-check it with the firmware table below.
- Check Recovery Mode: Power off, hold Volume Up + Power until recovery appears. The screen displays your chipset and current build, use this to confirm.
- Compare File Details: Make sure the version listed in the download table matches what you expect for your device and region.
Why Flash Stock ROM on Infinix Hot 50 4G X6882?
SP Flash Tool is the standard tool for flashing MediaTek devices like the Infinix Hot 50 4G X6882. Here is how flashing the stock firmware can help:
- Resolve OTA update failures and battery drain issues.
- Restore system apps that were accidentally removed or corrupted.
- Restore the original Infinix stock ROM to keep your warranty valid.
- Fix startup loops, lagging, and freezing on your device.
- Repair a phone that shuts down randomly or restarts in a loop.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Infinix Hot 50 4G X6882
Here is a summary of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Hot 50 4G X6882 |
| Firmware Version | V576 |
| File Size | 5.9 GB to 7.6 GB |
| Android Version | Android 14, XOS 14.5 |
| Platform | MediaTek Helio G100 (MT6789H) |
| Release Date | Released 2024, October |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
Selecting the correct firmware version is crucial. Use this table to determine which file you need based on your specific situation:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V576, download this one. It is the latest Infinix Hot 50 4G X6882 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V576 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V576 failed with a flash error | Try the next older version instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V576, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Infinix Hot 50 4G X6882 Firmware
Download the official stock firmware for your Infinix Hot 50 4G X6882 below. The latest available version is V576. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Hot_50_X6882_MT6789_RU_V576_240808_MXML.zip Size: 5.9 GB | Download Link | Download Link2 |
| File Name: X6882-H8915DJPAGM-U-RU-240808V576 Factory Signed Firmware.zip Size: 7.6 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Hot 50 4G X6882 (X6882) should not be confused with other Hot 50 4G variants that may have different chipsets or regional firmware. Even devices in the same Hot 50 4G line can use completely different processors. Always verify your exact model code “X6882” in Settings > About Phone before downloading any firmware from this page.
- Go to Settings and verify your model is exactly X6882. Phones with similar names can have completely different hardware.
- The chipset in your device should be MediaTek Helio G100 (MT6789H). If it is different, this firmware will not work.
- Always download directly from the table on this page to ensure you have the correct build.
- Check the file size after downloading, a mismatch with the listed size means a partial or corrupt download.
Prepare Your Infinix Hot 50 4G X6882 for Flashing
Rushing the preparation steps often leads to failed flashes. The VCOM driver installation is essential for the Infinix Hot 50 4G X6882 and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
- Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
- Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
- Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
- Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
- Set Up Drivers:
How to Install Firmware on Infinix Hot 50 4G X6882
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Hit the “Download” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
Common Issues When Flashing Infinix Hot 50 4G X6882
- Infinix Hot 50 4G X6882 Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X6882, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
What Is Normal After a Infinix Hot 50 4G X6882 Flash?
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
Missing IMEI or Corrupt Baseband on Infinix Hot 50 4G X6882 After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Infinix Hot 50 4G X6882 Firmware FAQ
Q1: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Infinix support if you are concerned.
Q2: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q3: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
Q4: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.
Q5: Is this firmware compatible with other Infinix models?
A: No. This firmware is built specifically for the Infinix Hot 50 4G X6882 running on the MediaTek Helio G100 (MT6789H) chipset. Even variants of the Hot 50 4G with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q6: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q7: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 14, XOS 14.5 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q8: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
People Also Ask About Infinix Hot 50 4G X6882
Will flashing firmware on Infinix Hot 50 4G X6882 erase my data?
Yes. Flashing stock firmware on the Infinix Hot 50 4G X6882 with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
Can flashing firmware fix a bricked Infinix Hot 50 4G X6882?
Yes. If your Infinix Hot 50 4G X6882 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.
What is the latest firmware version for Infinix Hot 50 4G X6882?
The latest available Infinix Hot 50 4G X6882 firmware on this page is version V576. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
What chipset does the Infinix Hot 50 4G X6882 use?
The Infinix Hot 50 4G X6882 uses the MediaTek Helio G100 (MT6789H) chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
Conclusion
Your Infinix Hot 50 4G X6882 should now be running V576 on a clean build. If the first boot takes a while, do not worry, that is completely normal after a fresh flash.
Ran into something unexpected? Leave a comment and describe what happened. Include which step you were on and what error you saw. I will get back to you.
Consider sharing this guide with anyone else who has a Infinix device that needs fixing.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
