Last Updated: July 30, 2026
Your Infinix Hot 10 Play X688B needs software restoration? This guide provides official stock firmware, flashing tools, drivers, and detailed instructions to get it working again.
Device: Infinix Hot 10 Play X688B | Chipset: MediaTek MT6765 Helio G35 | Flash Tool: SP Flash Tool
Android: Android 10 (Go edition), XOS 7 (upgradeable to Android 11) | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Hot 10 Play X688B (MediaTek MT6765 Helio G35)
Flash Tool: SP Flash Tool
Latest Build: V856
Firmware Files: 19 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Hot 10 Play X688B Firmware (Flash File) Drivers, Tools & Guide
The Infinix Hot 10 Play X688B regularly shows up with software issues like FRP locks, bootloops, or getting stuck on the Infinix logo. This guide covers all necessary solutions with official firmware, tools, and exact procedures.
Before beginning, extract the firmware to a simple folder path like C:FirmwareX688B. SP Flash Tool sometimes fails to locate the scatter file if the folder contains spaces or special characters. This small step saves frustrating troubleshooting later.
Your Infinix Hot 10 Play X688B uses a MediaTek MT6765 Helio G35 chipset, requiring SP Flash Tool and VCOM/MTK drivers for flashing. The stock firmware includes Android 10 (Go edition) with XOS 7 (upgradeable to Android 11). Released in 2021, USB driver installation may require manual steps on newer Windows versions.
Firmware files were verified across two independent sources to confirm authenticity and unmodified status. This page maintains the latest available builds as they become available.
Download the Infinix Hot 10 Play X688B firmware as a compressed ZIP. Use WinRAR or 7-Zip for extraction. Confirm the scatter file exists in the folder before proceeding.
This process returns the phone to factory settings, removing all personal data. This clean wipe resolves persistent problems such as bootloops, forgotten locks, Google verification, battery drain, and system errors.
Bypass Google Lock on Infinix Hot 10 Play X688B
The fastest method to bypass FRP on Infinix Hot 10 Play X688B uses a free Android apps launcher to access settings during setup. After flashing or a factory reset, you may encounter a Google account lock (FRP). Our free Android apps launcher provides the quickest solution. Removing your Google account before flashing prevents this issue entirely.
Infinix Hot 10 Play X688B Hard Reset Guide
To factory reset Infinix Hot 10 Play X688B without a computer, power off the device completely. Then hold Volume Up and Power simultaneously until the recovery menu appears. Use volume keys to select “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Infinix Hot 10 Play X688B to its original state. This resolves most software issues including slow performance, app crashes, forgotten screen locks, and bootloops. If problems persist after a factory reset, a full firmware flash using SP Flash Tool is covered in later sections.
Choosing the Right Firmware Version
The most frequent mistake users make is flashing firmware intended for a different device variant. Before downloading, verify your exact device identity:
- Check About Phone: Open Settings and find your model number. It must read “X688B”, not a similar name, the exact code.
- Match the Chipset: This firmware is designed for MediaTek MT6765 Helio G35. A different processor will prevent successful flashing.
- Review the Build Number: Compare your current software build string with the firmware table below.
- Check Recovery Mode: Power off, hold Volume Up + Power until recovery appears. The screen displays your chipset and build, use this for confirmation.
- Compare File Details: Ensure the version in the download table matches your device and region expectations.
Why Do We Need Infinix Hot 10 Play X688B Firmware?
The Infinix Hot 10 Play X688B uses a MediaTek chipset, making SP Flash Tool the standard firmware recovery method. Stock firmware flashing addresses these issues:
- Recover devices stuck in recovery mode only.
- Restore original Infinix stock ROM to maintain warranty validity.
- Repair phones that shut down randomly or restart in a loop.
- Clear forgotten screen locks, PIN, or pattern without original credentials.
- Fix touchscreen issues caused by corrupted system builds.
- Unlock devices that are locked or disabled.
- Resolve “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek MT6765 Helio G35 chipset.
Learn more about stock ROMs and why flashing works.
Firmware Details for Infinix Hot 10 Play X688B
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Hot 10 Play X688B |
| Firmware Version | V119, V856, V843, V788, V727, V638, V524, V383, V489, V449, V506 |
| File Size | 2.3 GB to 3.25 GB |
| Android Version | Android 10 (Go edition), XOS 7 (upgradeable to Android 11) |
| Platform | MediaTek MT6765 Helio G35 |
| Release Date | Released 2021, January 21 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is a frequent question. Find your situation in the table below and select the appropriate file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V856, download this one. It is the latest Infinix Hot 10 Play X688B firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V843, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V856 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V856 failed with a flash error | Try V843 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V856, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Infinix Hot 10 Play X688B Firmware
Download the official stock firmware for your Infinix Hot 10 Play X688B below. The latest available version is V856. After downloading, verify the file size matches the table above, a size mismatch usually indicates a corrupt download, and flashing corrupt files causes more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Hot_10_Play_X688B_MT6765_V119_210608.zip Size: 2.3 GB | Download Link | Download Link2 |
| File Name: X688B-H659ABCDEFGHIJKLMNO-R-GL-221214V856.zip Size: 3.21 GB | Download Link | Download Link2 |
| File Name: X688B-H659ABCDEFGHIJKLMNO-R-GL-221028V843.zip Size: 3.19 GB | Download Link | Download Link2 |
| File Name: X688B-H659ABCDEFGHIJKLMNO-R-GL-220531V788.zip Size: 3.23 GB | Download Link | Download Link2 |
| File Name: X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V727.zip Size: 3.25 GB | Download Link | Download Link2 |
| File Name: X688B-H659ABCDEFGHIJKLMNO-R-GL-220216V638.zip Size: 3.22 GB | Download Link | Download Link2 |
| File Name: X688B-H659ABCEFGHI-Q-GL-220109V524.zip Size: 2.63 GB | Download Link | Download Link2 |
| File Name: X688B-H659ABCDEFGHIJKLMNO-R-GL-211111V383.zip Size: 3.2 GB | Download Link | Download Link2 |
| File Name: X688B-H659ABCEFGHI-Q-GL-211018V489.zip Size: 2.63 GB | Download Link | Download Link2 |
| File Name: X688B-H659ADI-Q-RU-210608V119.zip Size: 2.34 GB | Download Link | Download Link2 |
| File Name: X688B-H659ABCEFGHI-Q-GL-210720V449.zip Size: 2.6 GB | Download Link | Download Link2 |
| File Name: X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V727.rar Size: 2.73 GB | Download Link | Download Link2 |
| File Name: INFINIX-HOT-PLAY-X688B-H659ABCDEFGHIJKLMNO-R-GL-221214V856-Flash-File.zip Size: 3.21 GB | Download Link | Download Link2 |
| File Name: INFINIX-HOT-10-PLAY-X688B-H659ABCDEFGHIJKLMNO-R-GL-221028V843-Flash-File.zip Size: 3.19 GB | Download Link | Download Link2 |
| File Name: INFNIX-HOT-10-PLAY-X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V727-Flash-File.rar Size: 2.73 GB | Download Link | Download Link2 |
| File Name: INFINIX-HOT-10-PLAY-X688B-H659ABCEFGHI-Q-GL-220109V524-Flash-File.zip Size: 2.63 GB | Download Link | Download Link2 |
| File Name: INFINIX-HOT-10-PLAY-X688B-H659ABCEFGHI-Q-GL-211111V506.zip Size: 2.63 GB | Download Link | Download Link2 |
| File Name: INFINIX-HOT-10-PLAY-X688B-H659ABCEFGHI-Q-GL-211018V489.zip Size: 2.63 GB | Download Link | Download Link2 |
| File Name: INFINIX-HOT-10-PLAY-X688B-H659ADI-Q-RU-210608V119.zip Size: 2.32 GB | Download Link | Download Link2 |
Only download firmware fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Hot 10 Play X688B (X688B) should not be confused with other Hot 10 Play variants that may have different chipsets or regional firmware. Even devices in the same Hot 10 Play line can use completely different processors. Always verify your exact model code “X688B” in Settings > About Phone before downloading any firmware from this page.
- Confirm your exact model is X688B, check About Phone, not the marketing name on the box.
- Your device must have a MediaTek MT6765 Helio G35 chipset. Boot into recovery mode to verify if unsure.
- Only use files downloaded from this page. Third-party mirrors may serve modified or incomplete packages.
- Compare the file size against the download table. If it does not match, the download is likely corrupt or incomplete.
Infinix Hot 10 Play X688B Flash Setup Checklist
Do not skip this section. Most failed Infinix flashes occur when preparation steps are rushed. The VCOM driver installation is essential for the Infinix Hot 10 Play X688B and other MediaTek devices. Windows may detect the device in Device Manager, but SP Flash Tool will not recognize it without the correct VCOM driver.
- IMEI Backup: Open the dialer and enter *#06#. Write both IMEI numbers on paper or take a screenshot. If you ever need to repair your IMEI after flashing, these are essential.
- Remove All Google Accounts: Go to Settings, Accounts, and sign out of every Google account. Leaving accounts signed in triggers FRP lock after flashing, blocking setup.
- Backup Everything: Photos, contacts, messages, WhatsApp data, move it all to a computer or cloud service. The flash returns the phone to factory state with no data.
- 50% Battery Minimum: Do not start with low battery. Power loss during flashing can make the device unresponsive and harder to fix.
- USB Cable and Computer: Use a proper data-transfer USB cable and Windows PC. Avoid USB hubs, connect directly to the motherboard port for stability.
- Download and Install Drivers:
Flashing Infinix Hot 10 Play X688B Firmware With SP Flash Tool
We use SP Flash Tool for this process. For older devices, try SP Flash Tool v5.1924 first. Newer SP Flash Tool versions require a DA (Download Agent) file that older firmware packages lack, causing “Auth” errors. If SP Flash Tool requests an auth file you do not have, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow these steps. The complete SP Flash Tool guide provides additional detail if needed.
- Download and Unpack:
- Select the correct firmware version from the downloads and save it to your PC.
- Extract the ZIP file. If another ZIP appears inside, extract that too. You should end up with actual firmware files, not another archive.
- Driver Check:
- Confirm you have installed the required drivers. Missing drivers are the most common reason the flash tool cannot detect your phone. Reboot your PC after installation.
- Load the Firmware File:
- Click “Scatter-loading” and navigate to the extracted firmware folder to select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Begin the flash by clicking “Download”.
- Leave everything untouched until completion. Even moving the USB cable can interrupt the write and cause failure.
- Wait and Reboot:
- The flash completes when the tool shows a success indicator. Disconnect your phone.
- Turn the phone on. Do not worry if it stays on the boot logo for several minutes, the system is rebuilding from scratch.
Common Issues When Flashing Infinix Hot 10 Play X688B
- Infinix Hot 10 Play X688B Not Recognized by SP Flash Tool:
- This is typically a driver issue, not a cable problem. Reinstall the VCOM drivers for the X688B, restart your PC, and try again before changing anything else.
- If that fails, switch to a USB 2.0 port, USB 3.0 ports frequently cause detection issues with MediaTek devices.
- Still not working? Temporarily disable your antivirus. It can block VCOM driver loading without error messages.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek stem from conflicts with old cached data, a recovery wipe usually resolves this without reflashing.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error when starting the download, check your scatter file first. A mismatch between the scatter file and device build is a common flash error cause.
- “Download DA FAIL” Error:
- This error occurs regularly. It almost always indicates improperly installed VCOM drivers. Reinstall them, restart your PC, and try again. If it persists, try SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require holding Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer SP Flash Tool versions require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you lack this file, switch to MTK Client instead, it handles Secure Boot automatically and is simpler.
Post-Flash Behavior on Infinix Hot 10 Play X688B
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will display a green circle or checkmark when done. If you see that, the flash completed successfully.
- Stuck in a bootloop after first boot? Enter recovery mode and perform a factory reset from there, see the hard reset guide above. This can happen occasionally and does not indicate a firmware problem.
- Wi-Fi, Bluetooth, and mobile data should all work immediately after setup. If mobile data fails, go to Settings, SIM and Network, and manually re-enter your APN, the flash sometimes clears carrier settings.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs as if the phone were new.
- Notification sounds and ringtones will return to factory defaults. Any custom tones you had will need to be redownloaded and reassigned in Settings.
- Dial *#06# immediately after setup to check your IMEI. Do this before inserting a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide before proceeding further.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had Google account backup active, it will offer to restore apps automatically during setup.
Missing IMEI or Corrupt Baseband on Infinix Hot 10 Play X688B After Flashing?
A missing or unknown IMEI is common after MediaTek flashes. The NVRAM partition storing IMEI and calibration data sometimes does not survive flashing intact. This looks alarming but is fixable:
- Check your drivers first: Install the Mediatek CDC Driver if not already present, without it, IMEI repair tools cannot detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option to try, it works straightforwardly on most MTK devices. Maui Meta is the alternative if SN Write fails to connect. Learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should return. If they still show null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Frequently Asked Questions
Q1: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing prevents this issue.
Q2: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs repeating. The device usually remains detectable by the flash tool even after a failed attempt.
Q3: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power simultaneously until the recovery menu appears. The recovery menu displays the build number, which you can use to verify your firmware version before flashing.
Q4: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version causes trouble, leave a comment below, there is usually a better fix than rolling back.
Q5: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory state. However, some manufacturers may flag bootloader unlocking or increased flash counters. Check your specific warranty terms with Infinix support if concerned.
Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming but is fixable. Follow the IMEI repair guide in the troubleshooting section. For MediaTek devices, SN Write Tool or Maui Meta handle the repair. Do not insert a SIM card until the IMEI is restored.
Q7: Is this firmware compatible with other Infinix models?
A: No. This firmware is built specifically for the Infinix Hot 10 Play X688B with MediaTek MT6765 Helio G35. Even Hot 10 Play variants with different letter suffixes can use completely different chipsets. Flashing wrong firmware can leave your phone in a difficult-to-recover state. Always check your exact model number in Settings.
Q8: How long does the flashing process take?
A: The actual flash usually takes 3-10 minutes depending on firmware size and USB speed. The first boot after flashing takes another 3-8 minutes. Do not interrupt the device during either stage. If the SP Flash Tool progress bar appears stuck, wait a few more minutes before assuming something went wrong.
People Also Ask About Infinix Hot 10 Play X688B
Can flashing firmware fix a bricked Infinix Hot 10 Play X688B?
Yes. If your Infinix Hot 10 Play X688B is stuck on the logo, in a bootloop, or will not turn on, flashing stock firmware with SP Flash Tool can restore it. This is the standard repair method used by service centers for Infinix devices.
Will flashing firmware on Infinix Hot 10 Play X688B erase my data?
Yes. Flashing stock firmware with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts are removed. Back up everything important before starting. There is no data recovery after flashing.
How do I check my Infinix Hot 10 Play X688B model number before flashing?
Go to Settings > About Phone and look for model number “X688B”. You can also confirm by entering recovery mode (Volume Up + Power while powered off), which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
What chipset does the Infinix Hot 10 Play X688B use?
The Infinix Hot 10 Play X688B uses MediaTek MT6765 Helio G35, a MediaTek processor. This requires SP Flash Tool and VCOM/MTK USB drivers for flashing. MediaTek devices use scatter-file-based flashing, different from Qualcomm (QFIL) or Samsung (Odin) methods.
Final Thoughts
That covers everything needed to safely flash official Infinix Hot 10 Play X688B firmware using SP Flash Tool and restore your device. If you followed each step, your phone should now run on a clean build.
If something did not go as expected, a specific error, a step not working for your setup, leave a comment below with as much detail as possible: the exact error message, which step you are on, and what you have already tried. I read every comment and will help work through the issue.
If this guide helped you, consider sharing it, it is the best way to help others dealing with the same problem.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
