Last Updated: June 2, 2026
Restoring your SM-F707U Galaxy Z Flip 5G requires the correct files and a clear set of steps. Below you will find the official Samsung Galaxy Z Flip 5G SM-F707U firmware, alongside all the necessary tools for FRP bypass, hard resets, IMEI repair, and driver installation.
Device: Samsung Galaxy Z Flip 5G SM-F707U | Chipset: Qualcomm Snapdragon 865+ 5G SM8250-AB | Flash Tool: Odin
Android: Android 10, upgradable to Android 13, One UI 5 | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Samsung Galaxy Z Flip 5G SM-F707U Firmware (Flash File) Drivers, Tools & Guide
The Samsung Galaxy Z Flip 5G SM-F707U firmware, necessary drivers, and flashing tools are all provided below to guide you through the Odin process. Using Odin to flash Samsung software is a simple routine when you have the right components. This page contains the proper firmware file, the exact Odin version required, and reliable instructions.
Before starting, sign out of any active Samsung accounts on the phone. Skipping this step will trigger Knox security, which creates a KG lock that takes much longer to resolve. Samsung packages arrive in a .tar.md5 format. Once you extract the main ZIP folder, look for files labeled AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If those specific files are missing, you have downloaded the incorrect package.
Your Samsung Galaxy Z Flip 5G SM-F707U firmware download arrives as a compressed ZIP archive. Extract the contents using WinRAR or 7-Zip. Inside, you should find files such as AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If these are absent, the firmware package does not match your device.
Flashing stock software intentionally wipes all data. This process effectively clears software glitches, FRP locks, application errors, sluggish performance, forgotten passwords, logo freezes, connectivity bugs, battery drain, and soft brick conditions.
Hard Reset Samsung Galaxy Z Flip 5G SM-F707U
A hard reset on the Samsung Galaxy Z Flip 5G SM-F707U is performed by powering off the device and holding Volume Up + Power until the recovery menu loads. Use the volume buttons to highlight “Wipe Data/Factory Reset” and press the Power button to confirm your selection. For older models featuring a physical Home button, hold Volume Up + Home + Power instead.
Executing a hard reset completely erases your internal storage and returns the Samsung Galaxy Z Flip 5G SM-F707U to its original factory settings. This resolves typical software complaints like system lag, random crashes, lost screen lock credentials, and continuous bootloops. Should the problem remain after a factory reset, a complete firmware installation using Odin is detailed in the upcoming sections.
Samsung Galaxy Z Flip 5G SM-F707U FRP Bypass
Bypassing FRP on the Samsung Galaxy Z Flip 5G SM-F707U is most efficiently done using a free Android apps launcher to access settings during the initial setup. Following a factory reset or a software flash, a Google account lock (FRP) might appear. You can use our free Android apps launcher to quickly navigate past this prompt. Removing your Google account before flashing is always the best practice to prevent this lock from triggering.
Why Do We Need Samsung Galaxy Z Flip 5G SM-F707U Firmware?
Flashing the official Samsung Galaxy Z Flip 5G SM-F707U firmware is necessary to resolve severe software malfunctions, update the operating system, or recover a bricked device. Samsung handsets rely on Odin for flashing regardless of their internal processor. Installing the official software fixes a variety of system issues:
- Regain access if the handset is locked or disabled.
- Install the most recent Android release supported by the hardware.
- Eliminate bootloops, system freezing, and severe lag on your SM-F707U Galaxy Z Flip 5G.
- Fix failed over-the-air updates and abnormal battery drain.
- Return the original stock ROM to maintain warranty status.
- Recover a handset that only boots into the recovery environment.
- Clear KG lock or Knox errors resulting from an interrupted or incorrect flash.
You can learn more about stock ROMs and why flashing works.
Choosing the Right Firmware Version
Selecting the correct firmware version requires verifying your exact model number, region code, and binary level before downloading. Flashing an incompatible file is a critical error. Confirm you have the right package by following these steps:
- Identify Your Exact Model Number: Open Settings › About Phone and locate your full model number (e.g. SM-F707U). The letter at the end is crucial, U/U1 designates the USA, W is Canada, N is Korea, and B/F represents International variants. Installing software meant for a different region causes major system errors.
- Match the CSC (Region): The 3-letter region code in the file name must align with your device. Check Settings › About Phone › Software Information for your active CSC, or view the Service Provider line inside Download Mode. Typical codes include XAA (US), BTU (UK), INS (India), and SER (Russia).
- Check the Binary Level: Inspect the version string on your current software (e.g.
XXU9BZDP, the digit following the letters represents the binary level). Downgrading to a lower binary level is not possible. A device operating on Binary 9 only accepts Binary 9 or newer files. - Confirm the Build Date: The final 4 characters of the PDA version reveal the build date, the first character dictates the year (A=2024, B=2025, C=2026), and the second dictates the month (A=Jan through L=Dec).
- Verify in Download Mode: Turn the phone off and hold Volume Down + Power to access Download Mode. This screen lists your precise model, CSC, and software version to verify before you begin.
Firmware Details for Samsung Galaxy Z Flip 5G SM-F707U
The firmware details for the Samsung Galaxy Z Flip 5G SM-F707U outline the official specifications, file types, and supported Android versions. Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Z Flip 5G SM-F707U |
| Firmware Version | N/A |
| File Size | N/A |
| Android Version | Android 10, upgradable to Android 13, One UI 5 |
| Platform | Qualcomm Snapdragon 865+ 5G SM8250-AB |
| Release Date | Released 2020, August 07 |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
The firmware version you should download depends entirely on your phone’s current state, whether it is stuck on a logo, locked by FRP, or experiencing lag. This is a common question, so I created a straightforward reference table. Locate your specific scenario and download the appropriate file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung Galaxy Z Flip 5G SM-F707U firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Z Flip 5G SM-F707U Firmware
You can download the official Samsung Galaxy Z Flip 5G SM-F707U firmware directly from the section below. The most recent release is the latest version. Once the download finishes, compare the file size against the specifications table above. A mismatch in file size typically indicates a corrupted or incomplete download, which will cause problems during the flashing phase.
Ensure you only download software that explicitly matches your exact model. See the firmware selection guide above if you are not sure.
- Your model number is a variant of SM-F707U with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from Qualcomm Snapdragon 865+ 5G SM8250-AB. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Samsung Galaxy Z Flip 5G SM-F707U Firmware
Preparing to install the Samsung Galaxy Z Flip 5G SM-F707U firmware requires backing up data, removing accounts, and installing the correct USB drivers. Review this checklist prior to launching Odin. Two frequent culprits behind flashing failures are an active Samsung account (which triggers KG lock) and a low-quality USB cable that disconnects during the write process. Always rely on a high-quality data cable.
- Back Up IMEI Numbers: Dial *#06# and record both IMEI numbers immediately. You will need these if an IMEI restoration is required after the flash.
- Remove Google Accounts: Sign out of every Google account to prevent an FRP lock from activating.
- Remove Samsung Accounts: Sign out of all Samsung accounts to bypass KG lock.
- Back Up Your Data: Save your photos, contacts, chat histories, and vital files. The flashing procedure wipes the internal storage completely.
- Charge Your Device: Maintain a minimum of 50% battery life. A power loss during a flash creates severe recovery challenges.
- USB Cable & PC: Utilize a reliable data USB cable and a Windows computer with functional USB ports.
- Install Required Drivers:
How to Install Firmware on Samsung Galaxy Z Flip 5G SM-F707U
Installing firmware on the Samsung Galaxy Z Flip 5G SM-F707U involves using the Odin flash tool to load the AP, BL, CP, and CSC files onto the device. We use Odin for this procedure. A helpful tip: leave “Auto Reboot” and “F. Reset Time” checked inside Odin to guarantee the cleanest installation result. If you are uncertain about which Odin release to utilize, visit our Odin versions page. Certain older Samsung handsets operate more reliably on previous Odin builds.
- Download and Extract:
- Acquire the correct software package from the links provided.
- Unzip the archive into a basic folder path. Avoid directories containing spaces or special characters, as certain flash tools struggle to read them.
- Install the Listed Drivers:
- Ensure all drivers listed above are properly installed and that you have restarted your computer. Failing to restart is a primary reason drivers fail to load.
- Load the Firmware File:
- Inside Odin, click “BL” and choose the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Duplicate this process for “CP” and “CSC”. Select HOME_CSC to retain your data, or choose CSC for a completely clean installation.
- Connect Your Device:
- Access Download Mode: Power off the handset, then press and hold Volume Down + Power (include the Home button on older models) until the warning screen displays. Press Volume Up to confirm and enter Download Mode.
- Attach the phone to your computer using a USB cord. Odin must display “Added..” in the log window, confirming a successful connection.
- Start Flashing:
- Press the “Start” button to initiate the sequence.
- Refrain from moving the cable, unplugging the device, or touching the screen until the operation finishes. Disconnecting prematurely is a leading cause of bricked phones.
- Wait and Reboot:
- When the installation completes successfully, detach the device.
- Turn the phone on. The initial startup requires more time than usual, allow up to 8 minutes.
Video Guide for Flashing
What to Expect After Flashing Samsung Galaxy Z Flip 5G SM-F707U Firmware
After flashing the Samsung Galaxy Z Flip 5G SM-F707U firmware, expect a longer initial boot time, warm device temperatures, and a completely clean system interface. Many users assume the process failed when it actually succeeded. Here is what is entirely normal following a successful installation:
- How to know the flash was successful: Odin will display “PASS.” in a green box near the top-left of the interface. Seeing this indicates a successful operation.
- First boot takes 3 to 8 minutes, avoid forcing a restart. The system is configuring itself for the first time. Interrupting this setup phase often causes bootloops.
- The phone will feel warm during first boot, this is expected behavior. The temperature normalizes shortly after the initial configuration finishes.
- All your apps are gone, this is standard. Download them again via the Play Store. An active Google account backup will prompt you to restore your applications automatically during the initial setup.
- Dial *#06# immediately after setup to verify your IMEI status. Complete this step before inserting a SIM card. If the screen reads “unknown” or “null”, consult the IMEI repair guide below prior to taking further action.
- Be careful when re-adding your Google account, failing to remove it prior to flashing might trigger an FRP prompt. Add the account fresh during the setup wizard rather than through the Settings menu later.
- Wi-Fi, Bluetooth, and mobile data should function immediately following the setup. If mobile data fails to connect, navigate to Settings › SIM and Network and manually input your APN details, as the flash occasionally wipes carrier configurations.
- Stuck in a bootloop after first boot? Access recovery mode and execute a factory reset from there, refer to the hard reset guide above. This occurs occasionally and does not imply the software is faulty; it usually stems from a conflict with residual data from the previous installation.
- Samsung Smart Switch: Following the installation of your Samsung Galaxy Z Flip 5G SM-F707U firmware, Samsung Smart Switch might suggest installing supplementary updates. Allow it to finish, as this guarantees your device runs the most recent security patches tailored for your region.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Z Flip 5G SM-F707U After Flashing?
A missing IMEI or corrupt baseband on the Samsung Galaxy Z Flip 5G SM-F707U after flashing usually indicates a corrupted EFS partition. This partition houses your IMEI and carrier configurations. Be aware that writing an IMEI that does not belong to your original device is prohibited in most regions, so restrict this procedure to restoring your original digits. Utilities such as ChimeraTool or BFT can assist with this task. Review your local regulations before moving forward.
Video Guide: How to repair IMEI
Common Issues When Flashing Samsung Galaxy Z Flip 5G SM-F707U
- Odin Shows “FAIL” Instead of “PASS”:
- This typically stems from a discrepancy between the software region and your device. Double-check your precise model number in Settings › About Phone prior to choosing the file. A single letter variation in the model code is significant.
- Samsung Galaxy Z Flip 5G SM-F707U Not Recognized by Odin:
- Install the Samsung USB drivers again. Verify that the phone is actually in Download Mode. Test a different USB cable, as Odin is highly sensitive to cable integrity.
- KG Lock / Knox Triggered After Flashing:
- This occurs when a Samsung account remained logged in prior to the flash, or when unauthorized software was applied. Consistently log out of Samsung accounts beforehand. Once KG lock is active, utilizing a professional unlocking service is typically required.
- Boot Loop After Flashing:
- Open recovery mode (Volume Up + Power) and execute a factory reset. This wipes out lingering data from the older software that might be generating the conflict.
Frequently Asked Questions
Q1: Will flashing the Samsung Galaxy Z Flip 5G SM-F707U firmware erase my data?
A: Yes, running this software through Odin resets the handset to its factory defaults, including the Android 10, upgradable to Android 13, One UI 5 baseline configurations. Every app, photo, contact, and account will be deleted. Secure everything you need beforehand. Data recovery is impossible once the procedure finishes.
Q2: Is this firmware compatible with other Samsung models?
A: No. This package is designed exclusively for the Samsung Galaxy Z Flip 5G SM-F707U operating on the Qualcomm Snapdragon 865+ 5G SM8250-AB processor. Even a Galaxy Z Flip 5G carrying a different letter suffix (for example, another variant of SM-F707U) might utilize a completely different internal chipset. Forcing the wrong software can leave the handset nearly impossible to repair. Always verify your exact model number in Settings › About Phone.
Q3: Can I downgrade from the latest version to an older firmware version?
A: While technically feasible on certain Qualcomm builds, rolling back is not advised. Downgrading introduces security vulnerabilities and application instability on Android 10, upgradable to Android 13, One UI 5. If the newest release is giving you trouble, leave a comment below, as there is generally a better solution than reverting to an older build.
Q4: What should I do if I encounter an FRP lock after flashing?
A: Utilize our free Android apps launcher. FRP protection on the Samsung Galaxy Z Flip 5G SM-F707U engages when a Google account remains logged in prior to the flash. Logging out of your Google account before starting the process is the best way to bypass this issue completely.
Q5: Are custom ROM options available for the Samsung Galaxy Z Flip 5G SM-F707U?
A: This tutorial focuses solely on official Samsung stock software. The availability of custom ROMs for the Samsung Galaxy Z Flip 5G SM-F707U relies on whether the Qualcomm Snapdragon 865+ 5G SM8250-AB processor has open-source kernel support. Visit our Custom ROMs page or browse the XDA Developers forum for specific custom ROM discussions.
Q6: My Samsung Galaxy Z Flip 5G SM-F707U is not detected by Odin. What should I do?
A: Begin with the drivers, reinstall the Samsung USB drivers, reboot your computer, and attempt the connection again. Move to a USB 2.0 port if you are currently using USB 3.0, because Samsung handsets communicate more reliably over USB 2.0. Temporarily disable your antivirus software. If the problem persists, leave a comment below detailing the exact error message, and I will assist you from there.
Q7: How do I enter recovery mode on my Samsung Galaxy Z Flip 5G SM-F707U?
A: Turn the device off entirely, then press and hold Volume Up + Power simultaneously until the recovery menu loads. On older Samsung models equipped with a physical Home button, press Volume Up + Home + Power. The recovery interface will present the build number for your Samsung Galaxy Z Flip 5G SM-F707U, allowing you to confirm your software version prior to flashing.
Q8: My IMEI shows “unknown” after flashing the Samsung Galaxy Z Flip 5G SM-F707U. Is my phone permanently damaged?
A: No, the situation appears severe but is entirely repairable. Follow the IMEI repair guide located in the troubleshooting section above. For Samsung devices, inspect the EFS partition for corruption first. Crucially, avoid inserting a SIM card until the IMEI is successfully restored.
Q9: How long does it take to flash Samsung Galaxy Z Flip 5G SM-F707U firmware?
A: The actual writing procedure generally requires 3 to 10 minutes, depending on the file size and your USB transfer speed. The initial startup following the flash takes additional time, typically 3 to 8 minutes. Avoid touching the device during either phase. If the progress bar in Odin appears frozen, allow it a few extra minutes before assuming a failure.
Final Thoughts on Samsung Galaxy Z Flip 5G SM-F707U Firmware
Flashing the official Samsung Galaxy Z Flip 5G SM-F707U firmware using Odin is a reliable method to restore your device to full working order. That covers every detail required to safely install the official software (the latest version) via Odin. If you followed the instructions carefully, your handset should now operate on a clean, stable build.
If the outcome was different than expected, such as a specific error code or a step that failed, leave a comment below. Provide the exact error message, your current step, and the troubleshooting steps you have already attempted. I review every comment and will help you resolve the issue.
If this tutorial proved useful, please consider sharing it to assist others facing similar challenges.
Browse all Samsung firmware downloads for additional devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
