Last Updated: June 2, 2026
The official Samsung Galaxy Tab S7+ SM-T975 firmware is the reliable solution for fixing software problems, FRP locks, and bootloop issues. This page provides the exact flash files, USB drivers, and step-by-step instructions you need to get your tablet working normally again.
Device: Samsung Galaxy Tab S7+ SM-T975 | Chipset: Qualcomm Snapdragon 865+ (SM8250-AB) | Flash Tool: Odin
Android: Android 13, One UI 5.1.1 | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Samsung Galaxy Tab S7+ SM-T975 Firmware (Flash File) Drivers, Tools & Guide
Downloading and flashing the correct Samsung Galaxy Tab S7+ SM-T975 firmware using Odin is a straightforward process when you have the right files. You will find the exact Odin version and compatible flash files linked below to restore your tablet.
Before you begin, sign out of any active Samsung accounts on the tablet. Skipping this step triggers Knox security and leaves you with a KG lock that takes extra time to remove.
The Samsung Galaxy Tab S7+ SM-T975 firmware package downloads as a compressed ZIP archive. Extract it using WinRAR or 7-Zip. Once extracted, look for files labeled AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If these files are missing, the package is incorrect for your device.
Flashing the stock software completely wipes your tablet. This factory reset effect resolves persistent software glitches, including forgotten screen locks, sluggish performance, Wi-Fi connectivity drops, battery drain, and soft brick conditions.
Hard Reset Samsung Galaxy Tab S7+ SM-T975
You can factory reset the Samsung Galaxy Tab S7+ SM-T975 without a computer by powering it off and holding Volume Up + Power until the recovery menu loads. For older models with a physical Home button, use Volume Up + Home + Power. Navigate to “Wipe Data/Factory Reset” using the volume keys and press the Power button to confirm.
A hard reset restores the Samsung Galaxy Tab S7+ SM-T975 to its original factory state, fixing common problems like app crashes, sluggish performance, and forgotten screen locks. If the tablet still malfunctions after a reset, a full firmware flash using Odin is the next step.
Samsung Galaxy Tab S7+ SM-T975 FRP Bypass
The fastest way to bypass FRP on the Samsung Galaxy Tab S7+ SM-T975 is to use a free Android apps launcher that grants access to settings during the initial setup wizard. If you perform a factory reset or flash the tablet without removing your Google account first, you will encounter an FRP lock. You can use our free Android apps launcher to get past the verification screen. Removing your Google account before resetting the tablet prevents this lock entirely.
Why Do We Need Samsung Galaxy Tab S7+ SM-T975 Firmware?
Flashing the official Samsung Galaxy Tab S7+ SM-T975 firmware is necessary to fix software malfunctions, update the operating system, or recover a bricked device. Samsung tablets are flashed using the Odin tool, which works reliably across different chipsets. Installing the stock software resolves a variety of system errors:
- Unlock a disabled or frozen tablet.
- Upgrade to the newest Android version supported by the hardware.
- Fix freezing, lagging, and constant bootloops on your SM-T975.
- Resolve over-the-air update failures and abnormal battery drain.
- Restore the original stock ROM to maintain warranty status.
- Recover the system when it only boots into recovery mode.
- Fix KG lock or Knox errors caused by an interrupted or incorrect flash.
Learn more about stock ROMs and why flashing works.
Choosing the Right Firmware Version
Selecting the correct firmware version requires matching your exact model number, region code, and binary level before downloading any files. Flashing the wrong file causes serious system errors, so verify your tablet details first:
- Identify Your Exact Model Number: Check Settings › About Phone for your full model number (e.g. SM-T975). The letter suffix indicates the region, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Installing a different variant will cause issues.
- Match the CSC (Region): The 3-letter region code in the file name must match your tablet. Find your current CSC under Settings › About Phone › Software Information or check the Service Provider line in Download Mode. Common codes include XAA (US), BTU (UK), INS (India), and SER (Russia).
- Check the Binary Level: Look at your current firmware version string (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade past this number. A tablet on Binary 9 only accepts Binary 9 or higher. - Confirm the Build Date: The final 4 characters of the PDA version represent the build date. The first character is the year (A=2024, B=2025, C=2026), and the second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off the tablet and hold Volume Down + Power to enter Download Mode. This screen lists your exact model, CSC, and current firmware version for easy verification.
Firmware Details for Samsung Galaxy Tab S7+ SM-T975
The official firmware specifications for the Samsung Galaxy Tab S7+ SM-T975 include Android 13, One UI 5.1.1, and a file size of 6.1 GB. Review the official software details below before downloading:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Tab S7+ SM-T975 |
| Firmware Version | XU1ATG4 |
| File Size | 6.1 GB |
| Android Version | Android 13, One UI 5.1.1 |
| Platform | Qualcomm Snapdragon 865+ (SM8250-AB) |
| Release Date | Released 2020, August 21 |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
You should download the firmware version that matches your specific issue, such as choosing the latest build for a dead tablet or using an older build if the newest OTA caused performance drops. Use this table to identify the right file for your situation:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | XU1ATG4, download this one. It is the latest Samsung Galaxy Tab S7+ SM-T975 firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash XU1ATG4 first, then follow the IMEI repair guide. Do not skip the reflash. |
| XU1ATG4 failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | XU1ATG4, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Tab S7+ SM-T975 Firmware
You can download the official Samsung Galaxy Tab S7+ SM-T975 firmware directly from the links provided below. The newest available version is XU1ATG4. After downloading, check that the file size matches the specifications listed above. A mismatched file size indicates a corrupted download, and flashing a broken file creates further system issues.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: T975XXU1ATG4_T975OXM1ATG4_INU_4file.zip Size: 6.1 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
- Your model number is a variant of SM-T975 with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from Qualcomm Snapdragon 865+ (SM8250-AB). Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Samsung Galaxy Tab S7+ SM-T975 Firmware
Preparing to flash the Samsung Galaxy Tab S7+ SM-T975 firmware requires a Windows PC, a high-quality data USB cable, and the latest Samsung USB drivers. Two common mistakes cause flashing failures: forgetting to sign out of Samsung accounts (which triggers KG lock) and using a cheap charge-only cable that disconnects mid-flash. Review this checklist before opening Odin:
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
How to Install Firmware on Samsung Galaxy Tab S7+ SM-T975
You can install the Samsung Galaxy Tab S7+ SM-T975 firmware by loading the extracted AP, BL, CP, and CSC files into Odin and clicking Start. We are using Odin for this process. Keep the “Auto Reboot” and “F. Reset Time” boxes checked in Odin to ensure a clean installation. If you need a different version, visit our Odin versions page to find the right tool for your setup.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters, as some flash tools have trouble with them.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and that your PC has been restarted since installation. Skipping the restart is a common reason drivers do not work correctly.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Click the “Start” button to begin.
- Do not disconnect, move the cable, or touch the device until the process is fully complete. Disconnecting mid-flash is how devices get bricked.
- Wait and Reboot:
- Once flashing finishes successfully, disconnect the device.
- Power on your device. The first boot will take longer than usual, give it up to 8 minutes.
Video Guide for Flashing
What to Expect After Flashing Samsung Galaxy Tab S7+ SM-T975 Firmware
After flashing the Samsung Galaxy Tab S7+ SM-T975 firmware, you will see a “PASS.” message in Odin and the tablet will take up to 8 minutes to complete its first boot. Many users assume the flash failed because the first boot takes longer than usual. Here is exactly what happens after a successful installation:
- How to know the flash was successful: A green “PASS.” message will appear in the top-left corner of the Odin log.
- First boot takes 3 to 8 minutes, do not restart the tablet manually. The operating system is configuring itself, and interrupting this can cause a bootloop.
- The phone will feel warm during first boot, this is normal behavior while the system sets up default applications. It will cool down shortly.
- All your apps are gone, the flash wipes the device completely. You can reinstall your apps from the Play Store or restore them from a previous Google account backup.
- Dial *#06# immediately after setup to check your IMEI before inserting a SIM card. If the status shows “unknown” or “null”, follow the IMEI repair guide immediately.
- Be careful when re-adding your Google account, if you did not remove your account prior to flashing, you might trigger FRP. Add the account directly through the initial setup wizard.
- Wi-Fi, Bluetooth, and mobile data should work immediately. If mobile data fails, navigate to Settings › SIM and Network to manually input your carrier APN details.
- Stuck in a bootloop after first boot? Boot into recovery mode and perform a factory reset (see the hard reset guide above). This clears leftover data conflicts from the old system.
- Samsung Smart Switch: Once the Samsung Galaxy Tab S7+ SM-T975 firmware is installed, Smart Switch might prompt you to install extra updates. Allow this process to finish to ensure you have the latest security patches.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Tab S7+ SM-T975 After Flashing?
A missing IMEI or corrupt baseband after flashing usually indicates a wiped or corrupted EFS partition on your tablet. Restoring an IMEI that does not belong to your original device is illegal in most regions, so only attempt this to recover your original number. Software like ChimeraTool or BFT can repair the EFS partition. Check your local regulations before proceeding.
Video Guide: How to repair IMEI
Common Issues When Flashing Samsung Galaxy Tab S7+ SM-T975
- Odin Shows “FAIL” Instead of “PASS”:
- This generally happens when the firmware region or model number does not match the tablet. Verify your exact model in Settings › About Phone before proceeding.
- Samsung Galaxy Tab S7+ SM-T975 Not Recognized by Odin:
- Reinstall the Samsung USB drivers and ensure the tablet is in Download Mode. Try a different USB cable, as Odin requires a stable data connection.
- KG Lock / Knox Triggered After Flashing:
- This occurs when a Samsung account remains signed in prior to flashing, or if unofficial software is used. Removing accounts beforehand prevents this. A professional tool is usually required to remove an active KG lock.
- Boot Loop After Flashing:
- Access recovery mode (Volume Up + Power) and execute a factory reset to clear conflicting data from the previous operating system.
Frequently Asked Questions
Q1: Will flashing the Samsung Galaxy Tab S7+ SM-T975 firmware erase my data?
A: Yes, installing this software with Odin resets the tablet to factory defaults, including Android 13, One UI 5.1.1. All accounts, photos, contacts, and applications will be deleted. Save your files beforehand, as data recovery is impossible after the flash completes.
Q2: Is this firmware compatible with other Samsung models?
A: No, this package is designed exclusively for the Samsung Galaxy Tab S7+ SM-T975 equipped with the Qualcomm Snapdragon 865+ (SM8250-AB) processor. Even a slightly different model variant might use different hardware. Installing incorrect software can severely damage the device. Always confirm your model in Settings › About Phone.
Q3: Can I downgrade from XU1ATG4 to an older firmware version?
A: While technically possible on certain Qualcomm devices, rolling back is not advisable. Downgrading exposes the tablet to security vulnerabilities and app instability on Android 13, One UI 5.1.1. If XU1ATG4 is malfunctioning, leave a comment below to find a better solution.
Q4: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP activates on the Samsung Galaxy Tab S7+ SM-T975 when a Google account remains logged in before a flash. Removing the account beforehand prevents the lock entirely.
Q5: Are custom ROM options available for the Samsung Galaxy Tab S7+ SM-T975?
A: This page focuses entirely on official stock software. The availability of custom ROMs for the Samsung Galaxy Tab S7+ SM-T975 depends on open-source kernel support for the Qualcomm Snapdragon 865+ (SM8250-AB). Visit our Custom ROMs page or the XDA Developers forum for specific custom builds.
Q6: My Samsung Galaxy Tab S7+ SM-T975 is not detected by Odin. What should I do?
A: Reinstall the Samsung USB drivers and reboot your computer. Connect the tablet to a USB 2.0 port instead of USB 3.0, as Samsung devices often communicate more reliably on older ports. Temporarily disable your antivirus software. If Odin still does not detect the device, leave a comment with the error message.
Q7: How do I enter recovery mode on my Samsung Galaxy Tab S7+ SM-T975?
A: Turn off the tablet completely, then press and hold Volume Up + Power until the menu appears. For older Samsung hardware with a Home button, use Volume Up + Home + Power. The recovery screen displays the Samsung Galaxy Tab S7+ SM-T975 build number, allowing you to verify the current software version.
Q8: My IMEI shows “unknown” after flashing the Samsung Galaxy Tab S7+ SM-T975. Is my phone permanently damaged?
A: No, the tablet is not permanently damaged, and the issue is repairable. Follow the IMEI repair guide in the section above to check for EFS partition errors. Do not insert a SIM card until the original IMEI is restored.
Q9: How long does it take to flash Samsung Galaxy Tab S7+ SM-T975 firmware?
A: The Odin installation typically takes 3 to 10 minutes, depending on the file size and USB transfer speed. The initial reboot takes an additional 3 to 8 minutes. Never unplug the tablet during either phase. If the Odin progress bar pauses, wait a few extra minutes before troubleshooting.
Final Thoughts on Samsung Galaxy Tab S7+ SM-T975 Firmware
Following these instructions carefully will allow you to successfully install the official Samsung Galaxy Tab S7+ SM-T975 firmware (XU1ATG4) and restore normal functionality to your tablet. If you encounter an error or a specific step fails, leave a detailed comment below. Include the exact error message, your current step, and the troubleshooting steps you have already attempted. I read all comments and will provide assistance.
If this guide helped you fix your tablet, please share it to help others facing the same software issues.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Installing stock firmware is done at your own risk. Follow the steps carefully. I am not responsible for device damage, but I will assist you if problems arise.
