Last Updated: July 21, 2026
This page contains everything you need to get the Samsung Galaxy S6 edge G925L working again. Download the stock firmware, grab the tools, and follow the steps below. Troubleshooting and IMEI repair steps are included as well.
Device: Samsung Galaxy S6 edge G925L | Chipset: Samsung Exynos 7 Octa 7420 | Flash Tool: Odin
Android: Android 7.0 Nougat, TouchWiz UI | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy S6 edge G925L (Samsung Exynos 7 Octa 7420)
Flash Tool: Odin
Latest Build: G925LKLU3ERG1
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung Galaxy S6 edge G925L Firmware (Flash File) Drivers, Tools & Guide
Flashing Samsung devices with Odin is simple if you follow the steps correctly. This page contains the correct firmware file for the Samsung Galaxy S6 edge G925L, the proper Odin version, and the steps that work.
Before you start, make sure to sign out of your Samsung account. If you skip this step, Knox will trigger, and you will face a KG lock issue later. Samsung firmware comes as .tar.md5 files. After unzipping the package, look for files named AP_*, BL_*, CP_*, and CSC_*. If you do not see these files, you have the wrong package.
Only one firmware build is currently available for the Samsung Galaxy S6 edge G925L. This is the stock ROM you should use for recovery, unbricking, or FRP bypass. The firmware ships with Android 7.0 Nougat and TouchWiz UI, which sets the default apps, security features, and interface you will see after flashing. The Samsung Galaxy S6 edge G925L was released in 2015, so USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play.
The Samsung Galaxy S6 edge G925L was released in 2015. This page is maintained with the latest available firmware builds as they become available. Samsung firmware uses a multi-file system (AP, BL, CP, CSC) specific to Odin-based flashing, which differs from single-file scatter-based tools.
Your Samsung Galaxy S6 edge G925L firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5. If you do not see these files, you may have the wrong firmware package for your device.
A full flash will erase everything on the device: apps, accounts, photos, and settings. This gives you a clean slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.
Reset Samsung Galaxy S6 edge G925L From Recovery Mode
To factory reset the Samsung Galaxy S6 edge G925L without a computer, turn the device off completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores the Samsung Galaxy S6 edge G925L to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
Remove FRP Lock on Samsung Galaxy S6 edge G925L
The quickest way to bypass FRP on the Samsung Galaxy S6 edge G925L is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
When Should You Flash Samsung Galaxy S6 edge G925L?
You should flash Samsung Galaxy S6 edge G925L firmware when the device has persistent software issues like bootloops or unresponsiveness. Samsung devices are flashed using Odin, regardless of the chipset inside. Flashing the official firmware can resolve the following issues:
- Repair a phone that shuts down randomly or restarts in a loop.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Remove persistent malware or adware that survives a factory reset.
- Restore system apps that were accidentally removed or corrupted.
- Update to the latest Android version supported by your phone.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Samsung Galaxy S6 edge G925L Firmware Compatibility Check
The most common mistake users make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. G925L). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Firmware Details for Samsung Galaxy S6 edge G925L
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy S6 edge G925L |
| Firmware Version | G925LKLU3ERG1 |
| File Size | 1.7 GB |
| Android Version | Android 7.0 Nougat, TouchWiz UI |
| Platform | Samsung Exynos 7 Octa 7420 |
| Release Date | Released 2015, April |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | G925LKLU3ERG1, download this one. It is the latest Samsung Galaxy S6 edge G925L firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash G925LKLU3ERG1 first, then follow the IMEI repair guide. Do not skip the reflash. |
| G925LKLU3ERG1 failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | G925LKLU3ERG1, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy S6 edge G925L Firmware
Download the official stock firmware for your Samsung Galaxy S6 edge G925L below. The latest available version is G925LKLU3ERG1. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Samsung_SM-G925L_G925LKLU3ERG1_G925LLUC3ERG1_KTC_7.0_1File.zip Size: 1.7 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy S6 edge G925L (G925L) should not be confused with other Galaxy S6 edge variants that may have different chipsets or regional firmware. Even devices in the same Galaxy S6 edge line can use completely different processors. Always verify your exact model code “G925L” in Settings > About Phone before downloading any firmware from this page.
- Your model number is a variant of G925L with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from Samsung Exynos 7 Octa 7420. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Samsung Galaxy S6 edge G925L Firmware
Go through this list before you open Odin for the Samsung Galaxy S6 edge G925L. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
How to Install Firmware on Samsung Galaxy S6 edge G925L
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Hit the “Start” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
Video Guide for Flashing
What to Expect After Flashing
Here is what is completely normal after a successful flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
What to Do if Samsung Galaxy S6 edge G925L Flash Fails
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy S6 edge G925L Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Missing IMEI or Corrupt Baseband on Samsung Galaxy S6 edge G925L After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Samsung Galaxy S6 edge G925L Firmware FAQ
Q1: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Samsung support if you are concerned.
Q2: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. Samsung devices can usually enter Download Mode even when the screen is completely dead, hold Volume Down + Power for 10 seconds. If the battery is completely drained, charge it for at least 15 minutes first.
Q3: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy S6 edge G925L running on the Samsung Exynos 7 Octa 7420 chipset. Even variants of the Galaxy S6 edge with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q4: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q5: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.
Q7: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
Q8: Can I go back to an older firmware version?
A: It is technically possible on some Exynos builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
People Also Ask About Samsung Galaxy S6 edge G925L
What is the latest firmware version for Samsung Galaxy S6 edge G925L?
The latest available Samsung Galaxy S6 edge G925L firmware on this page is version G925LKLU3ERG1. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung Galaxy S6 edge G925L erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy S6 edge G925L with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Samsung Galaxy S6 edge G925L model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy S6 edge G925L and look for the model number “G925L”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Samsung Galaxy S6 edge G925L?
Yes. If your Samsung Galaxy S6 edge G925L is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
Wrapping Up: Samsung Galaxy S6 edge G925L Firmware
You now have the complete guide to flashing the Samsung Galaxy S6 edge G925L firmware (G925LKLU3ERG1) using Odin and getting your device working again. If you followed each step, your phone should now be running on a clean build.
If something did not go as expected, a specific error, a step that is not working for your setup, leave a comment below with as much detail as you can: the exact error message, which step you are on, and what you have already tried. I read every comment and will help you work through it.
If this guide helped you, consider sharing it, it is the best way to help someone else who is dealing with the same problem.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
