Samsung Galaxy S4 mini I9195I GT-I9195I Firmware

Last Updated: June 13, 2026

For those times your Samsung Galaxy S4 mini I9195I GT-I9195I needs a software refresh, installing the official firmware can resolve many frustrating issues. Here, you will find the correct flash files, essential tools, and a clear guide to get your device operating perfectly again, covering everything from hard resets to FRP bypass procedures.

---

Samsung Galaxy S4 mini I9195I GT-I9195I Firmware (Flash File) Drivers, Tools & Guide

Applying the correct stock firmware to a Samsung device with Odin is a powerful way to troubleshoot various software problems. This page provides the exact firmware package for the Samsung Galaxy S4 mini I9195I GT-I9195I, the recommended Odin version, and a step-by-step flashing process that is known to work.

Before initiating any flashing procedure, it is important to first sign out of any Samsung accounts present on your device. Skipping this step can lead to a KG lock being activated, which requires additional time and effort to resolve after the flash. Also, remember that official Samsung firmware files are typically in .tar.md5 format; after extracting the initial ZIP archive, you should find individual files labeled AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_* for data retention).

The Samsung Galaxy S4 mini I9195I GT-I9195I firmware comes packaged as a compressed ZIP file. You will need to download it and then extract the contents using utility software such as WinRAR or 7-Zip. Once extracted, you should locate files that follow a specific naming convention: AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If these specific files are not visible, it suggests you might have downloaded an incorrect firmware package for your particular device model.

Keep in mind that flashing the stock firmware intentionally wipes all data on the device. This complete erasure is necessary to effectively fix a wide range of software issues, including FRP locks, persistent application errors, sluggish performance, forgotten screen locks, devices stuck on the logo or failing to boot, problems with Wi-Fi and Bluetooth connectivity, excessive battery drain, and general soft brick situations.

---

Hard Reset Samsung Galaxy S4 mini I9195I GT-I9195I

To perform a factory reset on the Samsung Galaxy S4 mini I9195I GT-I9195I without using a computer, power down the device completely. Next, press and hold the Volume Up button and the Power button simultaneously (on older models with a physical Home button, also include the Home button) until the recovery menu appears on the screen. Navigate through the menu options using the volume keys and select “Wipe Data/Factory Reset,” then confirm your choice with the Power button.

A hard reset removes all user data and restores your Samsung Galaxy S4 mini I9195I GT-I9195I to its original factory configuration. This action often resolves common software problems, such as slow operation, frequent app crashes, forgotten screen lock patterns, and endless boot loops. If the issues persist after completing a factory reset, a full firmware flash using Odin, as detailed in the subsequent sections, is the next step.

---

Samsung Galaxy S4 mini I9195I GT-I9195I FRP Bypass

The most efficient method to bypass Factory Reset Protection (FRP) on the Samsung Galaxy S4 mini I9195I GT-I9195I involves utilizing a free Android apps launcher that grants access to settings during the initial setup wizard. After flashing new firmware or performing a factory reset, you might encounter a Google account lock, also known as FRP. Our free Android apps launcher provides a quick way to move past this security measure. This situation also highlights why I always recommend removing your Google account before any flashing procedure, it completely prevents this particular issue.

---

Why Do We Need Samsung Galaxy S4 mini I9195I GT-I9195I Firmware?

Samsung devices, including the Samsung Galaxy S4 mini I9195I GT-I9195I, rely on Odin for firmware installation, irrespective of the underlying chipset. Whether you are dealing with a device that refuses to boot or other software glitches, flashing the official firmware can offer a reliable solution:

• You can unlock your device if it has become locked or disabled.
• This process allows you to update your phone to the newest Android version it officially supports.
• It helps fix issues like continuous startup loops, persistent lagging, and freezing on your GT-I9195I Galaxy S4 mini I9195I.
• It can resolve problems related to failed over-the-air (OTA) updates and unexpected battery drain.
• Flashing stock ROM restores the device to its original state, which helps maintain warranty validity.
• You can recover your device when it only boots into recovery mode.
• It provides a way to recover from KG lock or Knox-related issues that occur after an incorrect or interrupted flashing process on your device.

Discover more about stock ROMs and the effectiveness of flashing.

---

Choosing the Right Firmware Version

Before proceeding with any flashing, it is crucial to verify that you have obtained the correct file. Flashing incompatible firmware can lead to issues that are often difficult to fix:

1. Identify Your Exact Model Number: Navigate to Settings › About Phone and precisely note down your full model number, for instance, GT-I9195I. The letter suffix is very important; U/U1 typically indicates USA versions, W for Canada, N for Korea, and B/F often denotes International or Global variants. Using firmware meant for a different variant can lead to operational problems.
2. Match the CSC (Region): The three-letter region code, or CSC, found within the firmware filename must correspond to your device’s region. You can check your current CSC by going to Settings › About Phone › Software Information, or by looking at the Service Provider line when your device is in Download Mode. Common codes include XAA (US), BTU (UK), INS (India), and SER (Russia).
3. Check the Binary Level: Examine the version string of your current firmware (e.g., XXU9BZDP). The number immediately following the letters represents the binary level. It is important to note that you cannot downgrade to a lower binary level. Therefore, if your device is running on Binary 9, you must flash firmware that is Binary 9 or higher.
4. Confirm the Build Date: The last four characters of the PDA version string indicate the build date. The first character signifies the year (A=2024, B=2025, C=2026), and the second character denotes the month (A=January through L=December).
5. Verify in Download Mode: Turn off your device, then hold down Volume Down + Power to enter Download Mode. This screen provides precise information about your model, CSC, and the firmware version currently installed, which you should use to confirm compatibility before initiating the flash.

---

Firmware Details for Samsung Galaxy S4 mini I9195I GT-I9195I

Below is a concise summary of the official firmware specifications:

Firmware Information	Details
Device Model	Samsung Galaxy S4 mini I9195I GT-I9195I
Firmware Version	N/A
File Size	889.06 MB
Android Version	Android 4.4.4 (KitKat)
Platform	Qualcomm MSM8916 Snapdragon 410
Release Date	Released 2015, June
Region	Global, Africa and Asia
File Type	.tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)

---

Which Firmware Version Should I Download?

This is a common question, so I have created a straightforward guide to help. Locate your specific situation in the table below and it will direct you to the appropriate file:

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	the latest version, this is the most current Samsung Galaxy S4 mini I9195I GT-I9195I firmware available.
FRP / Google account lock only	Refer to the FRP bypass guide above; a full firmware flash is likely not necessary for this specific issue.
Not sure which region/CSC to download	Examine Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power) to see the CSC displayed on screen. Match the 3-letter code (e.g., XAA, BTU, INS) with the firmware filename.
Phone slow after a recent OTA update	Consider trying the next older version. Sometimes, the latest OTA updates can introduce new bugs, and an earlier build might offer better performance. Always ensure the binary level is equal to or higher than your device’s current binary level.
IMEI missing after a previous flash	Re-flash the latest version first. Afterwards, proceed with the IMEI repair guide. Do not skip the initial reflash.
the latest version failed with a flash error	Attempt to use the next older version. Carefully double-check your AP/BL/CP/CSC file assignments within Odin before assuming the firmware itself is causing the problem.
Restoring to factory / warranty repair	Use the latest version for a clean, fresh start.

To determine which Samsung firmware is more recent, observe the last four characters of the PDA version string (e.g., S938BXXU9CZDP). The initial character indicates the year (A=2024, B=2025, C=2026), the second represents the month (A=January, B=February… L=December, Z=final stable release), and the final two characters specify the revision (ranging from 0-9 then A-Z, where Z signifies the highest). However, before comparing dates, always verify the binary level: this is the digit located just before the date code (e.g., XXU9CZDP indicates Binary 9). It is critical to remember that you cannot downgrade to a lower binary level. If your device is currently on Binary 9, you should only flash firmware that is Binary 9 or a higher version. Also, ensure the three-letter CSC code within the firmware file corresponds to your device’s regional setting.

---

Download Samsung Galaxy S4 mini I9195I GT-I9195I Firmware

You can download the official stock firmware for your Samsung Galaxy S4 mini I9195I GT-I9195I from the links provided below. The most recent version currently available is the latest version. After downloading the file, it is important to confirm that its size matches the size listed in the table above; a discrepancy in size often indicates an incomplete or corrupted download, and flashing such a file can lead to more complications than it solves.

Software Details	Download Link	Members Link
File Name: I9195XXUCNH5_I9195OJVCNH1_KSA.zip Size: 889.06 MB	Download Link	Download Link2

Always ensure you are downloading firmware that is fully compatible with your precise device model. If you are uncertain, please consult the firmware selection guide above.

---

Prerequisites for Samsung Galaxy S4 mini I9195I GT-I9195I Firmware

Before launching Odin for your Samsung Galaxy S4 mini I9195I GT-I9195I, review this checklist. Two common issues encountered with Samsung devices are not signing out of a Samsung account before flashing, which can activate a KG lock, and using a USB cable that only works for charging, leading to dropped connections during the flashing process. Always use a proper data transfer cable, not just a charge-only one.

1. Back Up IMEI Numbers: Dial *#06# and make a note of both IMEI numbers now. These numbers will be important if you ever need to restore your IMEI after the flashing procedure.
2. Remove Google Accounts: Log out of all Google accounts on the device to prevent the FRP lock from activating after flashing.
3. Remove Samsung Accounts: Ensure you are signed out of all Samsung accounts to avoid triggering a KG lock.
4. Back Up Your Data: Create a backup of all your important data, including photos, contacts, WhatsApp conversations, and critical files. Flashing the firmware will completely wipe your device.
5. Charge Your Device: Make sure your device has at least 50% battery charge. A device that loses power during a flash can be very challenging to recover.
6. USB Cable & PC: Use a high-quality data-enabled USB cable (not one solely for charging) and a Windows computer equipped with functioning USB ports.
7. Install Required Drivers:
   • Ensure the Samsung USB Drivers are installed.

---

How to Install Firmware on Samsung Galaxy S4 mini I9195I GT-I9195I

We will be using Odin for this process. Here is a helpful tip: keep both “Auto Reboot” and “F. Reset Time” checked in Odin, as these two options together typically yield the cleanest flashing results. If you are unsure which Odin version is best to use, you can refer to our Odin versions page; some older Samsung devices might perform better with older Odin builds.

1. Download and Extract:
   • Download the correct firmware package using the links provided above.
   • Extract the ZIP file into a straightforward folder path, avoiding spaces or special characters in the path, as some flashing tools may encounter issues with them.
2. Install the Listed Drivers:
   • Confirm that all drivers mentioned earlier are properly installed and that your computer has been restarted since their installation. Forgetting to restart is a frequent reason why drivers do not function correctly.
3. Load the Firmware File:
   • Within Odin, click the “BL” button and then select the corresponding BL_*.tar.md5 file. Proceed to click “AP” and select the AP_*.tar.md5 file. Repeat this process for “CP” and “CSC.” Use HOME_CSC if you wish to retain user data, or CSC for a completely clean flash.
4. Connect Your Device:
   • Enter Download Mode by first powering off your phone. Then, simultaneously press and hold Volume Down + Power (add the Home button for older models) until the warning screen appears. Press Volume Up to confirm and proceed into Download Mode.
   • Connect your phone to your PC using a USB cable. Odin should display “Added..” in its log area, indicating that your device has been successfully detected.
5. Start Flashing:
   • Click the “Start” button to begin the flashing process.
   • It is crucial not to disconnect the device, move the cable, or interact with the device until the procedure has fully completed. Disconnecting during the flashing process is a common cause of device bricking.
6. Wait and Reboot:
   • Once the flashing operation successfully concludes, you can disconnect the device.
   • Power on your device. The initial boot-up will take longer than usual, potentially up to 8 minutes, as the operating system sets itself up from scratch.

Video Guide for Flashing

---

What to Expect After Flashing Samsung Galaxy S4 mini I9195I GT-I9195I Firmware

Many people contact me thinking something went wrong when it actually did not. Here is what is completely normal after a successful Samsung Galaxy S4 mini I9195I GT-I9195I firmware flash:

• How to know the flash was successful: Odin will display “PASS.” in green text in the top-left area of the log. If you see this message, the process completed without issues.
• First boot takes 3 to 8 minutes, do not attempt to force a reboot of the device. The operating system is configuring itself for the first time. Interrupting this stage can cause the device to enter a bootloop.
• The phone will feel warm during first boot, this is a typical occurrence. The temperature will stabilize after a few minutes once the initial application setup has finished.
• All your applications are gone, this outcome is expected. You will need to reinstall them from the Play Store. If you had an active Google account backup, the setup wizard will offer to restore your apps automatically.
• Dial *#06# immediately after setup to verify your IMEI. Do this before inserting a SIM card. If it shows “unknown” or “null,” proceed with the IMEI repair guide below before taking any other action.
• Exercise caution when re-adding your Google account, if you did not remove it before flashing, you might encounter an FRP prompt. Add the account fresh during the initial setup wizard, rather than later through the Settings menu.
• Wi-Fi, Bluetooth, and mobile data should all function correctly right after the setup process. If mobile data is not connecting, go to Settings › SIM and Network and manually re-enter your APN details, as the flash sometimes clears carrier APN settings.
• Stuck in a bootloop after first boot? Enter recovery mode and perform a factory reset from there, refer to the hard reset guide above. This can happen occasionally and does not necessarily mean the firmware is incorrect; it is usually due to a conflict with residual data from the previous installation.

• Samsung Smart Switch: After you have flashed the Samsung Galaxy S4 mini I9195I GT-I9195I firmware, Samsung Smart Switch might suggest installing additional updates. Allow this process to complete, as it ensures your device receives the most recent security patches relevant to your region.

---

Missing IMEI or Corrupt Baseband on Samsung Galaxy S4 mini I9195I GT-I9195I After Flashing?

If you find that a Samsung device has a missing IMEI after flashing, this often points to a corrupted EFS partition, which is the storage area for your IMEI and network settings. It is important to remember that restoring an IMEI number that does not belong to your original device is illegal in most countries, so only proceed if you are recovering the number your device had prior to flashing. Tools such as ChimeraTool or BFT can assist with this process. Always check your local laws before beginning.

Video Guide: How to repair IMEI

---

Common Issues When Flashing Samsung Galaxy S4 mini I9195I GT-I9195I

1. Odin Shows “FAIL” Instead of “PASS”:
   • This outcome typically signifies an incompatibility between the firmware region or model and your actual device. Before selecting firmware, confirm your precise model number in Settings › About Phone. Even a minor difference of a single letter in the model code can lead to problems.
2. Samsung Galaxy S4 mini I9195I GT-I9195I Not Recognized by Odin:
   • Begin by reinstalling the Samsung USB drivers. Ensure your device is correctly in Download Mode. If the problem persists, try using a different USB cable, as Odin can sometimes be particular about cable quality.
3. KG Lock / Knox Triggered After Flashing:
   • This issue arises when a Samsung account was still logged in before the flashing procedure, or when non-official firmware was used. Always make sure to sign out of all Samsung accounts before you flash. If a KG lock is already active, specialized unlocking tools are generally required to resolve it.
4. Boot Loop After Flashing:
   • Enter recovery mode (by holding Volume Up + Power) and then perform a factory reset from that menu. This action clears any residual data from the previous firmware installation that might be causing conflicts.

---

Frequently Asked Questions

Q1: Will flashing the Samsung Galaxy S4 mini I9195I GT-I9195I firmware erase my data?
A: Yes, applying this firmware using Odin will reset your device to its original factory configuration, including the default Android 4.4.4 (KitKat) settings. All applications, photos, contacts, and user accounts will be removed in the process. It is essential to back up any data you wish to keep before you begin, as data cannot be recovered once the flashing is complete.

Q2: Is this firmware compatible with other Samsung models?
A: No, this firmware is specifically designed for the Samsung Galaxy S4 mini I9195I GT-I9195I, which uses the Qualcomm MSM8916 Snapdragon 410 chipset. Even other versions of the Galaxy S4 mini I9195I with a slight difference in the letter suffix might contain a completely different internal chipset. Flashing the incorrect firmware can render your phone inoperable or very difficult to restore. Always confirm your exact model number by checking Settings › About Phone.

Q3: Can I downgrade from the latest version to an older firmware version?
A: While it is technically possible on some Qualcomm-based devices, I generally do not advise downgrading. Rolling back can introduce security vulnerabilities and cause compatibility issues with applications on Android 4.4.4 (KitKat). If you are experiencing problems with the newest version, please leave a comment below, there is often a more effective solution than reverting to an older build.

Q4: What should I do if I encounter an FRP lock after flashing?
A: If you encounter an FRP lock on your Samsung Galaxy S4 mini I9195I GT-I9195I, this means a Google account was still active on the device before the flash. The quickest way to address this is by using our free Android apps launcher. I always recommend signing out of your Google account before flashing to prevent this problem entirely.

Q5: Are custom ROM options available for the Samsung Galaxy S4 mini I9195I GT-I9195I?
A: This guide focuses exclusively on official Samsung stock firmware. The availability of custom ROMs for the Samsung Galaxy S4 mini I9195I GT-I9195I depends on whether its Qualcomm MSM8916 Snapdragon 410 chipset has sufficient open-source kernel support. For specific custom ROM threads, you should check our Custom ROMs page or the XDA Developers forum for device-specific discussions.

Q6: My Samsung Galaxy S4 mini I9195I GT-I9195I is not detected by Odin. What should I do?
A: First, focus on the drivers: reinstall the Samsung USB drivers, restart your PC, and then attempt the connection again. If you are using a USB 3.0 port, try switching to a USB 2.0 port instead, as Samsung devices often connect more reliably there. Temporarily disable your antivirus software. If these steps do not resolve the issue, please leave a comment below with the exact error message, and I will assist you further.

Q7: How do I enter recovery mode on my Samsung Galaxy S4 mini I9195I GT-I9195I?
A: To access recovery mode, power off the device completely. Then, press and hold the Volume Up button and the Power button simultaneously until the recovery menu appears. For older Samsung models that feature a physical Home button, the combination is Volume Up + Home + Power. The recovery menu will also display the build number for your Samsung Galaxy S4 mini I9195I GT-I9195I, which can be useful for verifying your firmware version before flashing.

Q8: My IMEI shows “unknown” after flashing the Samsung Galaxy S4 mini I9195I GT-I9195I. Is my phone permanently damaged?
A: No, this situation, while concerning, is usually fixable. It often suggests a corrupted EFS partition. You should follow the IMEI repair guide located in the troubleshooting section above. Crucially, do not insert a SIM card into the device until the IMEI has been successfully restored.

Q9: How long does it take to flash Samsung Galaxy S4 mini I9195I GT-I9195I firmware?
A: The actual flashing process typically lasts between 3 and 10 minutes, depending on the size of the firmware and the speed of your USB connection. The initial boot-up after flashing will take longer, usually ranging from 3 to 8 minutes. It is important not to interrupt the device during either of these stages. If the progress bar in Odin seems to be stuck, give it a few more minutes before concluding that something has gone wrong.

---

Final Thoughts on Samsung Galaxy S4 mini I9195I GT-I9195I Firmware

This covers everything you need to safely flash the official Samsung Galaxy S4 mini I9195I GT-I9195I firmware (the latest version) using Odin and restore your device to full functionality. If you followed each step carefully, your phone should now be running on a clean system build.

Should anything not go as planned, perhaps a specific error message appeared, or a step is not working with your setup, please leave a comment below. Provide as much detail as you can: the exact error message, which step you were on, and what troubleshooting steps you have already attempted. I make an effort to read every comment and will assist you in finding a solution.

If this guide was helpful to you, please consider sharing it. It is an excellent way to assist others who might be facing similar device issues.

Explore all available Samsung firmware downloads for a wider range of devices.

---

Disclaimer: Flashing stock firmware should be undertaken at your own risk. Please follow the instructions provided on this page with care. While I cannot be held responsible for any damage that may occur to your device, I am always ready to offer assistance if issues arise.