Samsung Galaxy Note Edge SM-N915P Firmware

Last Updated: July 6, 2026

Getting a Samsung Galaxy Note Edge SM-N915P back to normal requires the right stock ROM and a steady hand with Odin. I have gathered the files and instructions needed to get this device back up and running.

---

Samsung Galaxy Note Edge SM-N915P Firmware (Flash File) Drivers, Tools & Guide

Flashing Samsung firmware with Odin is straightforward once you know the steps. I have put everything together on this page: the right firmware file for the Samsung Galaxy Note Edge SM-N915P, the correct Odin version, and the steps that work.

Before you start, if your device has a Samsung account signed in, sign it out before doing anything else. Knox will trigger if this step is skipped, and dealing with a KG lock after flashing takes extra time. Also, Samsung firmware comes in .tar.md5 format, after extracting the ZIP, you should see files named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If you do not see these, you have the wrong package.

The Samsung Galaxy Note Edge SM-N915P was originally released in 2014, which means USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play. Powered by a Qualcomm Snapdragon 805 APQ8084 (Qualcomm) processor, the Samsung Galaxy Note Edge SM-N915P requires Qualcomm Flash Image Loader (QFIL) and Qualcomm HS-USB drivers. Make sure to install the correct driver package before connecting your device. Only one firmware build is currently available for the Samsung Galaxy Note Edge SM-N915P. This is the stock ROM you should use for recovery, unbricking, or FRP bypass.

The Samsung Galaxy Note Edge SM-N915P was released in 2014. This page is maintained with the latest available firmware builds as they become available. Samsung firmware uses a multi-file system (AP, BL, CP, CSC) specific to Odin-based flashing, which differs from single-file scatter-based tools.

Your Samsung Galaxy Note Edge SM-N915P firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.

Once you flash, the device goes back to factory condition. Everything stored on the phone, photos, messages, apps, will be gone. This clean state is what allows the flash to fix stuck logos, FRP locks, software corruption, and performance issues.

---

Remove FRP Lock on Samsung Galaxy Note Edge SM-N915P

The fastest way to bypass FRP on Samsung Galaxy Note Edge SM-N915P is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.

---

Hard Reset Samsung Galaxy Note Edge SM-N915P

To factory reset Samsung Galaxy Note Edge SM-N915P without a computer, power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores Samsung Galaxy Note Edge SM-N915P to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.

---

Verify Your Samsung Galaxy Note Edge SM-N915P Model Before Downloading

The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:

1. Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. SM-N915P). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
2. Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
3. Check the Binary Level: Look at the version string in your current firmware (e.g. XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware.
4. Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
5. Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.

---

When Should You Flash Samsung Galaxy Note Edge SM-N915P?

Samsung devices like the Samsung Galaxy Note Edge SM-N915P are flashed using Odin, regardless of the chipset inside. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:

• Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
• Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
• Restore system apps that were accidentally removed or corrupted.
• Unlock your device if it has been locked or disabled.
• Remove persistent malware or adware that survives a factory reset.
• Resolve OTA update failures and battery drain issues.
• Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.

Learn more about stock ROMs and why flashing works.

---

Firmware Details for Samsung Galaxy Note Edge SM-N915P

Here is a quick overview of the official firmware specifications:

Firmware Information	Details
Device Model	Samsung Galaxy Note Edge SM-N915P
Firmware Version	VPS4DPJ1
File Size	2.13 GB
Android Version	Android 4.4.4 (KitKat), upgradable to 6.0.1 (Marshmallow)
Platform	Qualcomm Snapdragon 805 APQ8084
Release Date	Released 2014, November
Region	Global, Africa and Asia
File Type	.tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)

---

Which Firmware Version Should I Download?

This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	VPS4DPJ1, download this one. It is the latest Samsung Galaxy Note Edge SM-N915P firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Not sure which region/CSC to download	Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename.
Phone slow after a recent OTA update	Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has.
IMEI missing after a previous flash	Re-flash VPS4DPJ1 first, then follow the IMEI repair guide. Do not skip the reflash.
VPS4DPJ1 failed with a flash error	Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem.
Restoring to factory / warranty repair	VPS4DPJ1, clean state, fresh start.

To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.

---

Download Samsung Galaxy Note Edge SM-N915P Firmware

Download the official stock firmware for your Samsung Galaxy Note Edge SM-N915P below. The latest available version is VPS4DPJ1. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: N915PVPS4DPJ1_N915PSPT4DPJ1_SPR.zip Size: 2.13 GB	Download Link	Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Samsung Galaxy Note Edge SM-N915P (SM-N915P) should not be confused with other Galaxy Note Edge variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Note Edge line can use completely different processors. Always verify your exact model code “SM-N915P” in Settings > About Phone before downloading any firmware from this page.

---

Prerequisites for Samsung Galaxy Note Edge SM-N915P Firmware

Go through this list before you open Odin for the Samsung Galaxy Note Edge SM-N915P. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.

1. Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
2. Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
3. Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
4. Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
5. Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
6. Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
7. Set Up Drivers:
   • Samsung USB Drivers

---

Install Stock Firmware on Samsung Galaxy Note Edge SM-N915P

We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.

1. Get the Firmware Ready:
   • Download the firmware file from the download section above.
   • Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like C:firmware.
2. Verify Your Drivers:
   • Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
3. Load the Firmware File:
   • In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
4. Connect Your Device:
   • Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
   • Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
5. Start Flashing:
   • Hit the “Start” button in the flash tool to start the process.
   • Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
6. Wait and Reboot:
   • When the flash completes, unplug the USB cable from your phone.
   • Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.

Video Guide for Flashing

---

Samsung Galaxy Note Edge SM-N915P Flashing Problems and Fixes

1. Odin Shows “FAIL” Instead of “PASS”:
   • This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
2. Samsung Galaxy Note Edge SM-N915P Not Recognized by Odin:
   • Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
3. KG Lock / Knox Triggered After Flashing:
   • This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
4. Boot Loop After Flashing:
   • Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.

---

Normal Behavior After Installing Samsung Galaxy Note Edge SM-N915P Firmware

Here is what is completely normal after a successful flash:

• How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
• First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
• The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
• Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
• Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
• Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
• The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.

---

Missing IMEI or Corrupt Baseband on Samsung Galaxy Note Edge SM-N915P After Flashing?

A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.

Video Guide: How to repair IMEI

---

Samsung Galaxy Note Edge SM-N915P Flashing FAQ

Q1: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.

Q2: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Samsung support if you are concerned.

Q3: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.

Q4: Will flashing erase my data?
A: Yes, flashing with Odin restores the device to factory state, including Android 4.4.4 (KitKat), upgradable to 6.0.1 (Marshmallow) default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.

Q5: Can I use a Mac or Linux computer for this?
A: Samsung firmware can be flashed using Heimdall on Linux or Mac, but the instructions on this page are written for Odin on Windows. If you only have a Mac, you may want to use a Windows virtual machine or Boot Camp for the most straightforward experience.

Q6: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.

Q7: Can I go back to an older firmware version?
A: It is technically possible on some Qualcomm builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.

Q8: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.

People Also Ask About Samsung Galaxy Note Edge SM-N915P

Can flashing firmware fix a bricked Samsung Galaxy Note Edge SM-N915P?
Yes. If your Samsung Galaxy Note Edge SM-N915P is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.

How do I check my Samsung Galaxy Note Edge SM-N915P model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Note Edge SM-N915P and look for the model number “SM-N915P”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

What chipset does the Samsung Galaxy Note Edge SM-N915P use?
The Samsung Galaxy Note Edge SM-N915P is powered by the Qualcomm Snapdragon 805 APQ8084, a Qualcomm processor. Flashing requires QFIL (Qualcomm Flash Image Loader) and Qualcomm HS-USB QDLoader drivers. The device must be in EDL (Emergency Download) mode for firmware installation.

Will flashing firmware on Samsung Galaxy Note Edge SM-N915P erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Note Edge SM-N915P with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.

---

Summary

That covers the entire flashing process for the Samsung Galaxy Note Edge SM-N915P. With VPS4DPJ1 installed, your device should boot cleanly and be ready for setup.

If you ran into an issue that is not covered here, or if one of the steps did not work the way it should, let me know in the comments. Include the error code or screenshot if you have one.

Bookmark this page if you work on Samsung devices regularly. I keep it updated when new firmware versions come out.

Browse all Samsung firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.