Last Updated: June 15, 2026
If your SM-N910M Galaxy Note 4 is experiencing software problems, this guide provides the official Samsung Galaxy Note 4 SM-N910M firmware to help resolve them. On this page, you will find all the required files and instructions for tasks such as a hard reset, FRP bypass, flashing the device, and IMEI repair, enabling you to get your phone back to its normal operating state.
Device: Samsung Galaxy Note 4 SM-N910M | Chipset: Qualcomm Snapdragon 805 APQ8084 | Flash Tool: Odin
Android: Android 4.4.4 (KitKat), upgradable to 6.0.1 (Marshmallow) | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Samsung Galaxy Note 4 SM-N910M Firmware (Flash File) Drivers, Tools & Guide
This section guides you through using the official Samsung Galaxy Note 4 SM-N910M firmware, along with the necessary drivers and tools, to restore your device. Installing Samsung firmware with Odin can be a straightforward process once you understand the necessary steps and precautions. Here, I have gathered the correct firmware file for the Samsung Galaxy Note 4 SM-N910M, the appropriate Odin version, and proven instructions.
Before you begin the flashing process, an important step is to remove any Samsung accounts signed into your device. Skipping this can activate Knox Guard (KG) lock, which requires additional effort to resolve after flashing. Samsung firmware files typically arrive in .tar.md5 format. After you extract the ZIP archive, you should find files such as AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If these specific files are not present, you might have downloaded an incorrect package.
The firmware for your Samsung Galaxy Note 4 SM-N910M comes as a compressed ZIP file. You will need to download it and then extract its contents using a utility like WinRAR or 7-Zip. Once extracted, you should see files with names such as AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If these files are not visible, it suggests that the firmware package you have might not be the correct one for your device.
It is important to remember that installing stock firmware will erase all data on your device. This complete wipe is often intentional, as it helps resolve various software issues. These can include a Factory Reset Protection (FRP) lock, problems with applications, sluggish performance, forgotten pattern locks, a device stuck on the logo or completely unresponsive, Wi-Fi and Bluetooth connectivity issues, excessive battery drain, and soft-bricked situations.
Hard Reset Samsung Galaxy Note 4 SM-N910M
To perform a hard reset on your Samsung Galaxy Note 4 SM-N910M without connecting to a computer, completely power off the device. Then, simultaneously press and hold the Volume Up + Power buttons (for older models with a physical Home button, use Volume Up + Home + Power) until the recovery menu appears on the screen. Navigate through the menu using the volume keys to highlight “Wipe Data/Factory Reset” and confirm your selection with the Power button.
A hard reset clears all user data and restores the Samsung Galaxy Note 4 SM-N910M to its original factory settings. This action is effective for fixing many software-related problems, such as slow performance, application crashes, forgotten screen locks, and boot loops. If the issues persist even after a factory reset, a full firmware flash using Odin, as explained in the subsequent sections, is the next step to consider.
Samsung Galaxy Note 4 SM-N910M FRP Bypass
The most straightforward method to bypass FRP on a Samsung Galaxy Note 4 SM-N910M involves using a free Android apps launcher to gain access to device settings during the initial setup. After a firmware flash or a factory reset, you might encounter a Google account lock, also known as FRP. Our free Android apps launcher provides an efficient way to get past this security measure. To avoid this situation entirely, I always suggest removing your Google account from the device before performing any flashing procedures.
Why Do We Need Samsung Galaxy Note 4 SM-N910M Firmware?
We need the official Samsung Galaxy Note 4 SM-N910M firmware to address various software issues and restore device functionality. Samsung devices, including the Samsung Galaxy Note 4 SM-N910M, are typically flashed using the Odin tool, regardless of their internal chipset. Whether you are dealing with startup problems or other software malfunctions, installing the official firmware can resolve a range of issues:
- Unlock your device if it has become locked or disabled due to software errors.
- Update your phone to the most recent Android version it supports.
- Correct startup loops, performance lags, and freezing issues on your SM-N910M Galaxy Note 4.
- Fix failed over-the-air (OTA) updates and problems with battery draining quickly.
- Restore the original Samsung stock ROM to maintain your device’s warranty status.
- Recover your device when it only boots into recovery mode.
- Address KG lock or Knox-related issues that arise after an incorrect or interrupted flash process on your device.
You can learn more about stock ROMs and why flashing them is an effective solution.
Choosing the Right Firmware Version
Selecting the correct firmware version for your Samsung Galaxy Note 4 SM-N910M is a critical step before you start the flashing process to avoid potential issues. Before you begin the flashing procedure, it is important to confirm you have the appropriate file. Using the wrong firmware can lead to problems that are difficult to fix:
- Identify Your Exact Model Number: Navigate to Settings › About Phone and make a note of your complete model number, such as SM-N910M. The letter suffix is important; for example, U/U1 typically indicates USA, W is for Canada, N denotes Korea, and B/F are common for International/Global variants. Flashing firmware designed for a different model variant can cause operational problems.
- Match the CSC (Region): The three-letter region code found within the firmware filename should correspond to your device’s region. You can check your current CSC by going to Settings › About Phone › Software Information, or by looking at the Service Provider line when your device is in Download Mode. Common codes include XAA (US), BTU (UK), INS (India), and SER (Russia).
- Check the Binary Level: Examine the version string of your current firmware (e.g.,
XXU9BZDP). The number immediately following the letters represents the binary level. It is crucial to understand that you cannot downgrade to a firmware with a lower binary level. If your device currently has Binary 9, you should only flash firmware that is Binary 9 or higher. - Confirm the Build Date: The final four characters of the PDA version provide information about the firmware’s build date. The first character indicates the year (A for 2024, B for 2025, C for 2026), and the second character signifies the month (A for January through L for December).
- Verify in Download Mode: Turn off your device, then press and hold Volume Down + Power to access Download Mode. This screen will clearly show your exact model, CSC, and the current firmware version installed, which you can use to confirm compatibility before proceeding with the flash.
Firmware Details for Samsung Galaxy Note 4 SM-N910M
Below is a summary of the official firmware specifications for the Samsung Galaxy Note 4 SM-N910M:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Note 4 SM-N910M |
| Firmware Version | N/A |
| File Size | N/A |
| Android Version | Android 4.4.4 (KitKat), upgradable to 6.0.1 (Marshmallow) |
| Platform | Qualcomm Snapdragon 805 APQ8084 |
| Release Date | Released 2014, Q4 |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
To determine which firmware version is appropriate for your specific situation, consult the guide below. This table addresses the most common questions I receive about selecting the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | Download the latest version. This represents the newest official Samsung Galaxy Note 4 SM-N910M firmware available. |
| FRP / Google account lock only | Refer to the FRP bypass guide above. In most cases, a full firmware flash is not required solely for this issue. |
| Not sure which region/CSC to download | You can verify your current CSC by checking Settings › About Phone › Software Information, or by entering Download Mode (Volume Down + Power). The three-letter code (e.g., XAA, BTU, INS) displayed on screen should be matched with the firmware filename. |
| Phone slow after a recent OTA update | Consider trying the next older version. Sometimes, a recent over-the-air update may introduce new bugs, and an earlier build might offer better performance. Always confirm that the binary level is equal to or higher than your device’s current level. |
| IMEI missing after a previous flash | First, re-flash the latest version of the firmware, then proceed with the IMEI repair guide. Do not skip the initial reflash step. |
| the latest version failed with a flash error | Attempt to flash the next older version instead. Also, double-check that you have assigned the AP, BL, CP, and CSC files correctly within Odin before concluding that the firmware itself is the cause of the problem. |
| Restoring to factory / warranty repair | Download the latest version. This provides a clean slate and a fresh start for the device. |
To determine which Samsung firmware is more recent, observe the last four characters of the PDA version string (for example, S938BXXU9CZDP). The first character in this sequence represents the year (A for 2024, B for 2025, C for 2026), and the second character indicates the month (A for January, B for February, up to L for December; Z typically denotes a final stable build). The final two characters signify the revision (ranging from 0-9 then A-Z, where Z is the highest). However, before comparing dates, always verify the binary level: this is the digit immediately preceding the date code (e.g., in XXU9CZDP, the binary level is 9). You cannot downgrade to a firmware with a lower binary level. Therefore, if your device is currently on Binary 9, you must only flash Binary 9 firmware or a higher version. Additionally, ensure that the three-letter CSC code in the firmware filename matches your device’s region.
Download Samsung Galaxy Note 4 SM-N910M Firmware
You can download the official stock firmware for your Samsung Galaxy Note 4 SM-N910M from the links provided here. The most current available version is the latest version. After your download is complete, it is important to confirm that the file size matches what is listed in the table above. A discrepancy in file size often indicates a partial or corrupted download, and attempting to flash a damaged file can lead to more significant problems for your device.
Please ensure you only download firmware that is fully compatible with your exact device model. If you are uncertain about which firmware to select, refer to the firmware selection guide provided above for detailed instructions.
- Your model number is a variant of SM-N910M with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from Qualcomm Snapdragon 805 APQ8084. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Samsung Galaxy Note 4 SM-N910M Firmware
Before you open Odin to flash your Samsung Galaxy Note 4 SM-N910M, it is important to complete this list of prerequisites. Two common issues that affect Samsung devices are: not signing out of a Samsung account before flashing, which can activate KG lock; and using a USB cable that charges but fails to maintain a stable data connection during the flash. Always use a reliable data cable, not one solely for charging.
- Back Up IMEI Numbers: Dial *#06# on your phone and write down both IMEI numbers now. These numbers will be necessary if you ever need to restore your IMEI after the flashing process.
- Remove Google Accounts: Sign out of all Google accounts present on your device to prevent an FRP lock from activating after the firmware flash.
- Remove Samsung Accounts: Ensure you sign out of any Samsung accounts to avoid triggering a KG lock.
- Back Up Your Data: Create a backup of all your personal data, including photos, contacts, WhatsApp conversations, and any important files. Flashing the firmware will completely erase the device’s contents.
- Charge Your Device: Make sure your device has at least 50% battery charge. A phone that loses power during a flash can become very difficult to recover.
- USB Cable & PC: Use a high-quality USB data cable, not one designed only for charging, and a Windows computer with functioning USB ports.
- Install Required Drivers:
- Install the Samsung USB Drivers.
How to Install Firmware on Samsung Galaxy Note 4 SM-N910M
Installing firmware on the Samsung Galaxy Note 4 SM-N910M involves using the Odin flash tool by following a specific sequence of steps. We will be using Odin for this procedure. A helpful suggestion: keep both “Auto Reboot” and “F. Reset Time” checked within Odin, as these two options together tend to produce the cleanest flash results. If you are unsure which Odin version is best, you can refer to our Odin versions page, as some older Samsung devices perform better with earlier Odin builds.
- Download and Extract:
- Download the correct firmware package from the links provided earlier on this page.
- Extract the contents of the ZIP file into a folder with a simple path. Avoid using paths that contain spaces or special characters, as some flash tools may encounter difficulties with them.
- Install the Listed Drivers:
- Confirm that all drivers mentioned above are properly installed on your computer and that your PC has been restarted since their installation. Forgetting to restart is a frequent reason why drivers may not function correctly.
- Load the Firmware File:
- Within the Odin interface, click the “BL” button and select the BL_*.tar.md5 file. Then, click “AP” and choose the AP_*.tar.md5 file. Repeat this process for “CP” and “CSC.” Use HOME_CSC if you wish to retain your data, or choose CSC for a complete, clean flash.
- Connect Your Device:
- Enter Download Mode: Power off your phone completely, then press and hold Volume Down + Power simultaneously (if your model has a physical Home button, include it in the combination) until a warning screen appears. Press Volume Up to confirm and proceed into Download Mode.
- Connect your phone to your PC using the USB cable. Odin should display “Added..” in its log area, indicating that your device has been recognized.
- Start Flashing:
- Click the “Start” button in Odin to initiate the flashing process.
- It is critical not to disconnect, move the USB cable, or touch the device until the procedure is entirely finished. Interrupting the connection during a flash is a common way devices become bricked.
- Wait and Reboot:
- Once the flashing process successfully concludes, you can disconnect the device from the computer.
- Power on your device. The initial boot after a flash will take longer than usual; allow it up to 8 minutes to complete.
Video Guide for Flashing
What to Expect After Flashing Samsung Galaxy Note 4 SM-N910M Firmware
After successfully flashing the Samsung Galaxy Note 4 SM-N910M firmware, several behaviors are normal during the initial setup and device usage. Many users often think something has gone wrong when these events are completely expected:
- How to confirm a successful flash: Odin will show “PASS.” in green text in the top-left area of its log. Seeing this message means the process completed correctly.
- The first boot takes between 3 to 8 minutes, so do not force your device to reboot. The operating system is configuring itself from scratch during this time. Interrupting this stage is a common cause of devices getting stuck in boot loops.
- Your phone might feel warm during its first boot cycle, which is normal. The temperature will stabilize after a few minutes once the initial application setup is finished.
- All your applications will be gone, and this is to be expected. You will need to reinstall them from the Play Store. If you had a Google account backup active, the setup wizard will offer to restore your applications automatically.
- Dial *#06# immediately after setup to verify your IMEI. Do this before inserting a SIM card. If it shows “unknown” or “null,” proceed with the IMEI repair guide below before taking any other steps.
- Exercise caution when re-adding your Google account. If you did not remove it before flashing, you might encounter an FRP prompt. Add your account freshly during the initial setup wizard, rather than adding it later through the Settings menu.
- Wi-Fi, Bluetooth, and mobile data should all function correctly immediately after setup. If mobile data is not connecting, go to Settings › SIM and Network and manually re-enter your APN settings, as the flash sometimes clears carrier APN configurations.
- Stuck in a boot loop after the first boot? Enter recovery mode and perform a factory reset from there. Refer to the hard reset guide above. This can occur occasionally and does not necessarily mean the firmware is incorrect; it is usually due to a conflict with residual data from the previous installation.
- Samsung Smart Switch: After you flash your Samsung Galaxy Note 4 SM-N910M firmware, Samsung Smart Switch might prompt you to install additional updates. Allow these updates to complete, as this ensures your device receives the latest security patches specific to your region.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Note 4 SM-N910M After Flashing?
A missing IMEI on a Samsung device after flashing typically indicates a corrupted EFS partition, which is responsible for storing your IMEI and carrier settings. It is important to remember that restoring an IMEI that is not the original number assigned to your device is illegal in most countries. Therefore, you should only proceed if you are restoring the exact IMEI that your device had before you performed the flash. Tools such as ChimeraTool or BFT can assist with this process. Please consult your local laws before taking any action.
Video Guide: How to repair IMEI
Common Issues When Flashing Samsung Galaxy Note 4 SM-N910M
- Odin Shows “FAIL” Instead of “PASS”:
- This often happens due to a mismatch between the firmware’s region or model and your specific device. Make sure to confirm your exact model number in Settings › About Phone before you choose the firmware. Even a single letter difference in the model code can lead to problems.
- Samsung Galaxy Note 4 SM-N910M Not Recognized by Odin:
- Begin by reinstalling the Samsung USB drivers. Ensure your device is in Download Mode. Try connecting with a different USB cable, as Odin can sometimes be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This issue occurs when a Samsung account remained signed in on the device before the flashing process, or when non-official firmware was used. Always sign out of all Samsung accounts before you flash your device. If a KG lock is already active, you will generally need a professional unlocking tool to resolve it.
- Boot Loop After Flashing:
- Enter recovery mode (by holding Volume Up + Power) and perform a factory reset from that menu. This action clears any old data from the previous firmware installation that might be causing a conflict.
Frequently Asked Questions
Q1: Will flashing the Samsung Galaxy Note 4 SM-N910M firmware erase my data?
A: Yes, installing this firmware with Odin will reset your device to its factory state, including the default Android 4.4.4 (KitKat) settings, which is upgradable to 6.0.1 (Marshmallow). All applications, photographs, contacts, and linked accounts will be deleted. It is essential to back up any important data before you begin, as there is no way to recover information once the flashing process is complete.
Q2: Is this firmware compatible with other Samsung models?
A: No, this firmware is specifically designed for the Samsung Galaxy Note 4 SM-N910M model, which operates on the Qualcomm Snapdragon 805 APQ8084 chipset. Even other variants of the Galaxy Note 4 with a slightly different model number suffix (for instance, a variation of SM-N910M) could contain a completely different chipset internally. Attempting to flash incorrect firmware can render your phone in an unrecoverable state. Always confirm your precise model number in Settings › About Phone.
Q3: Can I downgrade from the latest version to an older firmware version?
A: While it is technically possible on certain Qualcomm builds, I do not advise downgrading. Reverting to an older firmware can introduce security vulnerabilities and cause application compatibility problems, especially on Android 4.4.4 (KitKat), upgradable to 6.0.1 (Marshmallow). If you are experiencing difficulties with the latest version, please leave a comment below; there is usually a more effective solution than rolling back.
Q4: What should I do if I encounter an FRP lock after flashing?
A: If you encounter an FRP lock on your Samsung Galaxy Note 4 SM-N910M after flashing, use our free Android apps launcher. An FRP lock activates when a Google account was still signed in on the device before the firmware installation. This is precisely why I consistently recommend signing out of your Google account prior to flashing, as it completely prevents this issue.
Q5: Are custom ROM options available for the Samsung Galaxy Note 4 SM-N910M?
A: This guide focuses exclusively on official Samsung stock firmware. The availability of custom ROMs for the Samsung Galaxy Note 4 SM-N910M depends on whether the Qualcomm Snapdragon 805 APQ8084 chipset has sufficient open-source kernel support from the developer community. You can check our Custom ROMs page or explore the XDA Developers forum for discussions and threads specific to custom ROMs for this device.
Q6: My Samsung Galaxy Note 4 SM-N910M is not detected by Odin. What should I do?
A: Begin by addressing the drivers. Reinstall the Samsung USB drivers, restart your PC, and then attempt the connection again. If you are using a USB 3.0 port, try switching to a USB 2.0 port, as Samsung devices often have more reliable connections with older USB 2.0 ports. Temporarily disable your antivirus software. If these steps do not resolve the issue, please leave a comment below with the exact error message, and I will assist you further.
Q7: How do I enter recovery mode on my Samsung Galaxy Note 4 SM-N910M?
A: To enter recovery mode, power off your device completely. Then, press and hold the Volume Up + Power buttons simultaneously until the recovery menu appears. For older Samsung models that feature a physical Home button, the combination is Volume Up + Home + Power. The recovery menu will also display the build number for your Samsung Galaxy Note 4 SM-N910M, which can be useful for verifying your current firmware version before flashing.
Q8: My IMEI shows “unknown” after flashing the Samsung Galaxy Note 4 SM-N910M. Is my phone permanently damaged?
A: No, while this situation can appear concerning, it is usually fixable. You should follow the IMEI repair guide located in the troubleshooting section above. For Samsung devices, it is important to first check for any corruption within the EFS partition. The crucial point is not to insert a SIM card into your device until the IMEI has been successfully restored.
Q9: How long does it take to flash Samsung Galaxy Note 4 SM-N910M firmware?
A: The actual flashing process typically lasts between 3 and 10 minutes, depending on the size of the firmware and the speed of your USB connection. The first boot after the flash will take longer than usual, anywhere from 3 to 8 minutes. It is vital not to interrupt the device during either of these stages. If the progress bar in Odin appears to be stalled, allow a few more minutes before assuming there is a problem.
Final Thoughts on Samsung Galaxy Note 4 SM-N910M Firmware
This guide provides all the necessary information to safely flash the official Samsung Galaxy Note 4 SM-N910M firmware using Odin and restore your device’s functionality. If you have carefully followed each instruction, your phone should now be operating on a clean software build.
If any part of the process did not go as expected, perhaps you encountered a specific error, or a step is not working with your setup, please leave a comment below. Include as much detail as you can: the exact error message, which step you are currently on, and what troubleshooting you have already attempted. I read every comment and will do my best to help you work through the problem.
If you found this guide helpful, please consider sharing it. It is an excellent way to assist others who might be facing similar device issues.
You can browse all Samsung firmware downloads for other devices.
Disclaimer: Flashing stock firmware carries inherent risks and is undertaken at your own discretion. Please follow the instructions provided on this page with care. While I cannot be held responsible for any damage that may occur to your device, I am always committed to providing assistance if difficulties arise.
