Last Updated: June 15, 2026
This guide provides the official Samsung Galaxy Note 4 SM-N910F firmware, along with complete instructions for hard resets, FRP bypass, IMEI repair, and all necessary tools and drivers to restore your device.
Device: Samsung Galaxy Note 4 SM-N910F | Chipset: Qualcomm Snapdragon 805 APQ8084 | Flash Tool: Odin
Android: Android 6.0.1 Marshmallow with TouchWiz | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Samsung Galaxy Note 4 SM-N910F Firmware (Flash File) Drivers, Tools & Guide
Flashing firmware on Samsung devices with Odin is a direct process, especially when you have all the correct components. This page brings together the exact firmware file for the Samsung Galaxy Note 4 SM-N910F, the recommended Odin version, and a clear set of steps to get your device operating properly again.
Before you begin, remember to sign out of any Samsung accounts on your device. Skipping this step can activate Knox Guard (KG lock), which adds extra steps to deal with after the flashing process. Also, official Samsung firmware is always provided in .tar.md5 format; after extracting the ZIP archive, you should find files labeled AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If these files are not present, you may have an incorrect firmware package.
The Samsung Galaxy Note 4 SM-N910F firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, you should see files such as AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If these files are missing, the package might not be suitable for your device model.
Be aware that installing stock firmware erases all data from your device. This is necessary to fix various software problems, including FRP locks, application issues, slow performance, forgotten screen patterns, devices stuck on the logo or failing to boot, Wi-Fi and Bluetooth connectivity problems, excessive battery drain, and soft brick situations.
Hard Reset Samsung Galaxy Note 4 SM-N910F
To hard reset your Samsung Galaxy Note 4 SM-N910F without using a computer, first power off the device completely, then simultaneously press and hold Volume Up + Power. For older models equipped with a physical Home button, include it in the combination: Volume Up + Home + Power. Keep holding until the recovery menu appears, then use the volume keys to navigate to “Wipe Data/Factory Reset” and select it with the Power button.
Performing a hard reset deletes all user data and restores the Samsung Galaxy Note 4 SM-N910F to its factory default settings. This action can resolve most software glitches, such as lagging performance, frequent app crashes, forgotten screen locks, and boot loops. If issues persist after a factory reset, the next step is a complete firmware flash using Odin, as detailed in the sections that follow.
Samsung Galaxy Note 4 SM-N910F FRP Bypass
The most efficient way to bypass FRP on a Samsung Galaxy Note 4 SM-N910F involves using a free Android apps launcher, which allows access to system settings during the initial setup wizard. After flashing or performing a factory reset, you might encounter a Google account lock (FRP). Our free Android apps launcher offers a quick solution. Removing your Google account prior to flashing also prevents this issue entirely.
Why Do We Need Samsung Galaxy Note 4 SM-N910F Firmware?
Official firmware is necessary for Samsung devices like the Samsung Galaxy Note 4 SM-N910F, which are typically flashed using Odin regardless of their internal chipset. Installing the official firmware can resolve various software and boot-related problems:
- To unlock a device that has become locked or disabled.
- To update the phone to the most recent Android version it supports.
- To correct issues like continuous startup loops, persistent lagging, and freezing on your SM-N910F Galaxy Note 4.
- To fix problems with failed OTA updates and excessive battery drain.
- To reinstall the original Samsung stock ROM, which helps maintain warranty validity.
- To recover a device that only boots into recovery mode.
- To fix KG lock or other Knox-related problems that may occur after an improper or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Choosing the Right Firmware Version
Before you flash any firmware, confirm you have selected the correct file, as flashing an incompatible version can lead to irreversible issues.
- Identify Your Exact Model Number: Check Settings › About Phone for your full model number (e.g., SM-N910F). The letter suffix is critical; U/U1 indicates USA, W means Canada, N is Korea, and B/F typically signifies International/Global variants. Using firmware meant for a different variant can cause problems.
- Match the CSC (Region): The three-letter region code in the firmware filename should correspond to your device’s current CSC. You can find this under Settings › About Phone › Software Information or by checking the Service Provider line in Download Mode. Common codes include XAA (US), BTU (UK), INS (India), and SER (Russia).
- Check the Binary Level: Examine the version string of your current firmware (e.g.,
XXU9BZDP, the digit following the letters represents the binary level). You cannot downgrade to a lower binary level. If your device is currently on Binary 9, you must only flash firmware that is Binary 9 or higher. - Confirm the Build Date: The last four characters of the PDA version indicate the build date; the first character represents the year (A=2024, B=2025, C=2026), and the second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Turn off your device, then press and hold Volume Down + Power to enter Download Mode. This screen will display your exact model, CSC, and current firmware version, which you can use for final confirmation before flashing.
Firmware Details for Samsung Galaxy Note 4 SM-N910F
Below is a summary of the official Samsung Galaxy Note 4 SM-N910F firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Note 4 SM-N910F |
| Firmware Version | XXS1DQFB |
| File Size | 1.94 GB |
| Android Version | Android 6.0.1 Marshmallow with TouchWiz |
| Platform | Qualcomm Snapdragon 805 APQ8084 |
| Release Date | Released 2014, October |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This table outlines recommendations based on common issues. Find the situation that matches yours to determine the best Samsung Galaxy Note 4 SM-N910F firmware to download:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | XXS1DQFB, download this one. It is the latest Samsung Galaxy Note 4 SM-N910F firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash XXS1DQFB first, then follow the IMEI repair guide. Do not skip the reflash. |
| XXS1DQFB failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | XXS1DQFB, clean state, fresh start. |
To determine which Samsung firmware is newer, look at the last four characters of the PDA version string (e.g., S938BXXU9CZDP). The first character indicates the year (A=2024, B=2025, C=2026), the second represents the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the final two denote the revision (0-9 then A-Z, where Z is the highest). However, before comparing dates, always check the binary level: this is the digit just before the date code (e.g., XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, you must only flash Binary 9 or higher firmware. Additionally, ensure the three-letter CSC code in the firmware matches your device’s region.
Download Samsung Galaxy Note 4 SM-N910F Firmware
Download the official stock firmware for your Samsung Galaxy Note 4 SM-N910F from the links below. The most current available version is XXS1DQFB. After downloading, verify that the file size matches what is listed in the table above. A size discrepancy often indicates an incomplete or corrupted download, and flashing a damaged file can introduce new problems.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: N910FXXS1DQFB_N910FVFG1DQC3_XFV.zip Size: 1.94 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
- Your model number is a variant of SM-N910F with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from Qualcomm Snapdragon 805 APQ8084. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Samsung Galaxy Note 4 SM-N910F Firmware
Before you open Odin to flash your Samsung Galaxy Note 4 SM-N910F, review this list of prerequisites. Two frequent causes of problems with Samsung devices are a forgotten Samsung account that triggers a KG lock and a USB cable suitable only for charging, which loses connection during the flash. Always use a proper data transfer cable, not just a charging cable.
- Back Up IMEI Numbers: Dial *#06# and record both IMEI numbers immediately. These will be necessary if you ever need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent an FRP lock from occurring after the flash.
- Remove Samsung Accounts: Sign out of any Samsung accounts to avoid triggering a KG lock.
- Back Up Your Data: Create a full backup of all personal data, including photos, contacts, WhatsApp chats, and important files. Flashing completely wipes the device.
- Charge Your Device: Ensure your phone has at least 50% battery charge. A device that loses power during a flash is very challenging to recover.
- USB Cable & PC: Use a high-quality data USB cable, not a charge-only cable, along with a Windows computer that has functional USB ports.
- Install Required Drivers:
How to Install Firmware on Samsung Galaxy Note 4 SM-N910F
We will use Odin for this process. A useful tip: keep both “Auto Reboot” and “F. Reset Time” checked in Odin, as this combination helps ensure the cleanest flash result. If you are uncertain about which Odin version to use, consult our Odin versions page, as older Samsung devices sometimes perform better with older Odin builds.
- Download and Extract:
- Download the correct Samsung Galaxy Note 4 SM-N910F firmware package using the links provided above.
- Extract the ZIP file to a simple folder path, avoiding spaces or special characters, as some flashing tools may encounter issues with such paths.
- Install the Listed Drivers:
- Confirm that all drivers mentioned previously are installed, and ensure your PC has been restarted since the installation. Failing to restart is a common reason for driver malfunction.
- Load the Firmware File:
- In Odin, click the “BL” button and select the
BL_*.tar.md5file. Then, click “AP” and select theAP_*.tar.md5file. Repeat this for “CP” and “CSC”. UseHOME_CSCif you want to retain your user data, orCSCfor a complete factory reset.
- In Odin, click the “BL” button and select the
- Connect Your Device:
- Enter Download Mode: Power off your phone, then press and hold Volume Down + Power (add the Home button for older models) until the warning screen appears. Press Volume Up to confirm and proceed into Download Mode.
- Connect your phone to your PC using a USB cable. Odin should display “Added..” in its log area, indicating successful device detection.
- Start Flashing:
- Click the “Start” button in Odin to begin the flashing process.
- Do not disconnect the cable, move the device, or touch it until the entire process is complete. Interrupting a flash can result in a bricked device.
- Wait and Reboot:
- Once the flashing process successfully concludes, you can disconnect the device.
- Power on your device. The initial boot will take longer than usual, allow up to eight minutes for it to complete.
Video Guide for Flashing
What to Expect After Flashing Samsung Galaxy Note 4 SM-N910F Firmware
Many users worry that something has gone wrong post-flashing when the behavior is actually normal. Here is what you should expect after a successful Samsung Galaxy Note 4 SM-N910F firmware flash:
- How to confirm a successful flash: Odin will show “PASS.” in green text in the top-left area of the log. If you see this message, the process completed without issues.
- The first boot cycle will take 3 to 8 minutes; do not manually restart the device. The operating system is configuring itself from scratch. Interrupting this phase can lead to boot loops.
- Your phone might feel warm during the first boot, which is normal. The temperature will stabilize after a few minutes once the initial application setup is finished.
- All your applications will be gone, as expected. You will need to reinstall them from the Play Store. If you had an active Google account backup, it will offer to restore your applications automatically during the setup process.
- Immediately after setup, dial *#06# to verify your IMEI. Do this before inserting a SIM card. If it displays “unknown” or “null”, refer to the IMEI repair guide below before proceeding with anything else.
- Exercise caution when re-adding your Google account. If you did not remove it before flashing, you might encounter an FRP prompt. Add your account freshly during the setup wizard, rather than later through the Settings menu.
- Wi-Fi, Bluetooth, and mobile data should all function correctly after initial setup. If mobile data does not connect, navigate to Settings › SIM and Network and manually re-enter your APN settings, as flashing can sometimes clear carrier APN configurations.
- Stuck in a boot loop after the first boot? Enter recovery mode and perform a factory reset from there; refer to the hard reset guide above. This can occur occasionally and usually indicates a conflict with residual data from the previous installation, not an issue with the firmware itself.
- Samsung Smart Switch: After flashing your Samsung Galaxy Note 4 SM-N910F firmware, Samsung Smart Switch might prompt you to install additional updates. Allow these updates to complete to ensure your device has the most recent security patches for your region.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Note 4 SM-N910F After Flashing?
A missing IMEI on a Samsung device after flashing often indicates a corrupted EFS partition, which stores your device’s IMEI and carrier settings. Note that restoring an IMEI that is not the device’s original number is illegal in most regions; only proceed if you are restoring the original number the device had prior to flashing. Specialized tools such as ChimeraTool or BFT can assist with this. Always check your local laws before attempting any IMEI repair.
Video Guide: How to repair IMEI
Common Issues When Flashing Samsung Galaxy Note 4 SM-N910F
- Odin Shows “FAIL” Instead of “PASS”:
- This error typically signifies an incompatibility between the firmware’s region or model and your device. Double-check your exact model number in Settings › About Phone before selecting the firmware. Even a minor difference in the model code can lead to a failed flash.
- Samsung Galaxy Note 4 SM-N910F Not Recognized by Odin:
- Reinstall the Samsung USB drivers and ensure your device is in Download Mode. Try using a different USB cable, as Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This issue arises when a Samsung account remained signed in before the flashing process or when unofficial firmware was used. Always sign out of all Samsung accounts prior to flashing. If KG lock is already active, a specialized unlocking tool is usually required.
- Boot Loop After Flashing:
- Enter recovery mode by holding Volume Up + Power and perform a factory reset from there. This action clears any residual data from the previous firmware that might be causing a conflict.
Frequently Asked Questions
Q1: Will flashing the Samsung Galaxy Note 4 SM-N910F firmware erase my data?
A: Yes, flashing this firmware using Odin will reset your device to its factory state, including the default settings for Android 6.0.1 Marshmallow with TouchWiz. All applications, photos, contacts, and accounts will be removed. Create a backup of anything important before you start, as there is no way to recover data once the flash is complete.
Q2: Is this firmware compatible with other Samsung models?
A: No, this firmware is specifically designed for the Samsung Galaxy Note 4 SM-N910F, which runs on the Qualcomm Snapdragon 805 APQ8084 chipset. Even other Galaxy Note 4 variants with a different letter suffix can have entirely different internal components. Flashing incompatible firmware can leave your phone in a state that is very difficult to recover from. Always verify your exact model number in Settings › About Phone.
Q3: Can I downgrade from XXS1DQFB to an older firmware version?
A: While it is sometimes technically possible on certain Qualcomm builds, I do not advise downgrading. Reverting to an older version can introduce security vulnerabilities and app compatibility issues on Android 6.0.1 Marshmallow with TouchWiz. If you are experiencing problems with XXS1DQFB, please leave a comment below; often, there is a better solution than reverting to an older build.
Q4: What should I do if I encounter an FRP lock after flashing?
A: If you encounter an FRP lock on your Samsung Galaxy Note 4 SM-N910F after flashing, you should use our free Android apps launcher. FRP lock activates when a Google account remains signed in before the flashing process. For this reason, I always advise users to sign out of their Google account beforehand to prevent this issue entirely.
Q5: Are custom ROM options available for the Samsung Galaxy Note 4 SM-N910F?
A: This guide focuses solely on official Samsung stock firmware. The availability of custom ROMs for the Samsung Galaxy Note 4 SM-N910F depends on whether its Qualcomm Snapdragon 805 APQ8084 chipset has open-source kernel support. For device-specific custom ROM discussions, you should check our Custom ROMs page or visit the XDA Developers forum.
Q6: My Samsung Galaxy Note 4 SM-N910F is not detected by Odin. What should I do?
A: Begin by reinstalling the Samsung USB drivers, then restart your PC, and try connecting again. If you are using a USB 3.0 port, try switching to a USB 2.0 port, as Samsung devices are often more stable on USB 2.0. Temporarily disable your antivirus software. If these steps do not resolve the issue, please leave a comment with the exact error message, and I will assist you further.
Q7: How do I enter recovery mode on my Samsung Galaxy Note 4 SM-N910F?
A: To enter recovery mode on your Samsung Galaxy Note 4 SM-N910F, power off the device completely. Then, press and hold Volume Up + Power simultaneously until the recovery menu appears. For older Samsung models that include a physical Home button, you would use Volume Up + Home + Power. The recovery menu will display your device’s build number, which you can use to confirm your current firmware version before flashing.
Q8: My IMEI shows “unknown” after flashing the Samsung Galaxy Note 4 SM-N910F. Is my phone permanently damaged?
A: No, while this situation may seem concerning, it is usually fixable. You should follow the IMEI repair guide located in the troubleshooting section above. For Samsung devices, it is important to check for EFS partition corruption first. The critical point is not to insert a SIM card until the IMEI has been successfully restored.
Q9: How long does it take to flash Samsung Galaxy Note 4 SM-N910F firmware?
A: The actual flashing process for the Samsung Galaxy Note 4 SM-N910F firmware typically lasts between 3 and 10 minutes, depending on the firmware file size and your USB connection speed. The initial boot after flashing takes longer, ranging from 3 to 8 minutes. It is crucial not to interrupt your device during either stage. If Odin’s progress bar appears stalled, allow a few extra minutes before assuming there is a problem.
Final Thoughts on Samsung Galaxy Note 4 SM-N910F Firmware
This covers all the steps needed to safely flash the official Samsung Galaxy Note 4 SM-N910F firmware (XXS1DQFB) using Odin and get your device functioning properly again. If you followed each instruction carefully, your phone should now be running on a fresh, clean build.
If you encountered any unexpected issues, a specific error message, a step that did not work for your setup, please leave a detailed comment below. Include the exact error, the step you were on, and what troubleshooting you have already attempted. I read all comments and will help you find a solution.
If this guide was helpful to you, please consider sharing it. This is the best way to assist others facing similar problems.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
